Ski storage racks at school. Making a convenient rack with your own hands

If you are a regular at ski resorts, you may have noticed convenient devices for storing puddles. They are a special design where the fastening is carried out by small extended pins for easy grip and quick release.

Prices from 9,000 (for 40 pairs)

Cost calculation

Order a cost estimate

Almost all managers of ski resorts that provide ski rentals order similar designs from us, because it is inexpensive and reliable, and most importantly, it saves space in the storage room and warehouse.

Features of ski racks

Ski racks have a lot of differences and can also perform useful features. Thus, the presented furniture has a number of features:

racks are made for horizontal and vertical storage of skis. This is where you need to decide on the location of such racks, because the small space will not allow you to install structures for storing skis in a horizontal position. To make the right choice, you can contact our specialists. Our craftsmen will take precise measurements and recommend models for you to order;
racks for storing skis in a horizontal position are made with only three supports to prevent modification of sports equipment;
racks with vertical ski storage consist of a rack with two crossbars and hooks for storing skis and poles;
The task is to preserve for a long time original appearance and the quality of this sports equipment;
the racks have different capacities, depending on the number of pairs available, as well as the customer’s preferences;
often the crossbars have the ability to adjust the width to accommodate equipment, since they can differ in their purpose (running, mountain);
the racks have special trays for collecting melted water;
It is possible to order racks with additional space for installing shelves, used for storing other sports equipment.

All of the listed features and capabilities will allow you to choose suitable model designs, a selection of which is presented in our catalog. It is also possible to order a rack according to your own sketch, recorded by our employee.

Whether the ski machine was created with your own hands or in an industrial environment does not matter. Anyone who loves skiing knows how important the quality of equipment is. To achieve reliability and stability, a ski preparation machine is used.

To engage in skiing, you need the skills of an athlete and equipment that is reliable, High Quality. Ski equipment that is in good condition, with factory parameters preserved, helps ensure speed.

According to servicemen, people who prepare equipment for competitions, the design of the equipment plays main role. After all, prepared equipment glides better. Even lubrication does not have the same effect as machining.

There are many types of skiing. Therefore, different equipment is selected. Racing models have different structures and levels of aggressiveness of the material from which they are made. Professional athletes know how to choose equipment depending on the climatic conditions, in which they are going to “drive”. But sometimes the factory structure is not satisfactory, or wear and tear has already reached its limit. Then the ski preparation machine comes into play.

Damage to sports equipment is difficult to repair. The device will help restore the surface's slip and former properties. Not everyone has access to factory equipment. In this case, we recommend making your own ski machine.

Design features for different types of skis

The ski dressing machine is a two-profile structure made of metal or natural wood, which is placed along the edges of the aluminum base. On some modifications, supports and elements in the form of legs are attached to the base. The foundation is a fragment on which the success of future use depends.

For processing, the equipment is placed on the structure so that the sliding plane is directed upward and the ends touch the profiles. A metal loop is inserted into the fastening element for boots, which is stretched until the equipment straps take the desired configuration.

This position is fixed, facilitating further work process.

To reduce the weight of the device, the base is made of aluminum tube. Since the equipment is needed at any time, you can carry it with you.

Main details

Winter sports enthusiasts need to regularly update their equipment. For this purpose, a toolkit has been developed to keep the equipment in good condition. Buying a factory model sometimes becomes pointless. Therefore, fans of skiing will find this homemade device useful.

Today there are many elements on sale to make models that delight with their simplicity and ease of equipment repair. Options for drawings of such structures can be found on the Internet, and you can create the model you like. Not required complex circuits, because even on the simplest model prepare equipment for training or competitions.

Applied structure on homemade equipment serves for a long time. And the design is always at hand. This allows you to achieve sliding of equipment in convenient time, anywhere. Fans are happy to tidy up their equipment before the start of the skiing season.

Why is inventory processed? To achieve good sliding, without “blockages” on the sides, this happens when worn. It is necessary to take into account that equipment is processed differently, and special machines are designed for it. And if snowboards and equipment with metal edges are processed with strong pressure on the sliding plane, then running equipment requires careful handling. The preparation of running models is carried out with care and precision.

The condition of the sliding surface must be carefully monitored:

do not allow drying out;
regularly wash off used lubricant;
treat with ointment;
To store or transport equipment, fill the plastic with shipping paraffin.

Strict adherence to the rules of equipment care will allow you to avoid using harsh machine processing using emery wheels for a long time, which is necessary when the equipment is severely deformed.

A hand-made ski processing machine is enough to ensure easy gliding, giving skiers the opportunity to achieve high performance.

Wooden supports

We are talking about creating collapsible equipment consisting of two parts. Both parts are identical. The base is a square metal pipe. A support made of natural wood is installed on top of it.

The quality of processing depends on the nuances of manufacturing the structure. Mandatory point - correct location and holding the slats on the bed. An important nuance the production of the base is considered.

Base

When creating this element, attention should be paid to the following recommendations:

The wooden support is attached to the base with self-tapping screws.
The screw head is carefully recessed.
The supports must have a deflection so that the equipment fits correctly on the bed.

Metal base square pipes, which connect wooden plank, inserted into both pipes is a good option.

Ski brackets

When creating a homemade structure, you need to know that the bracket is the element to which the planks are attached when preparing for further use. Therefore, processing depends on the correctness of its choice.

The height of the bracket is adjustable according to requirements. For durability, the part is made from a piece of round steel. To secure the bracket, it is better to weld it. This is reliable, because to prepare modern equipment before training, you need a device. Otherwise, if the structure is shaky, it will be impossible to carry out full preparation.

Important nuances during manufacturing

Light and reliable materials should be used to make the machine. Carry out work observing safety precautions. The homemade design must meet the dimensions and requirements, otherwise in the future it will be impossible to process the equipment correctly.

When starting to manufacture the device, you need to make sure that the necessary parts are prepared. Choose dry boards for the structure so that over time they do not “sag” when dry. Precision in creation will allow the inventory to be processed correctly.

Create homemade design It won't work without a drawing.

Advantages of the machine

A number of advantages that the device has are:

mobility, compactness;
structural strength and resistance to force loads;
ease of use;
ease of manufacture.

People who own factory models consider homemade devices to be imperfect from a technical point of view. But it cannot be denied that designs made independently have many advantages. A light weight, quick installation, adjustment along the entire length of the slats, stability due to the square profile at the base. With the advent of new materials, it has become possible to create fantastic things.

Performance homemade device useful for processing winter equipment, exciting activity. This design provides high sliding performance. And success in making one machine will become a useful skill in life.

Ski storage winter period and the off-season largely determines their durability. Violation simple rules may lead to deformation, mechanical damage and damage appearance equipment. For each type of ski and the material from which they are made, there are special storage rules.

At the end of the season, it's time to put your favorite skis into storage

General rules for storing wooden skis

Skis made of wood require especially careful handling. The material is prone to drying out, losing shape and changing appearance. Therefore, to store them you must follow the following rules:

Don't even hold them a short time, under the sun's rays and near heating devices - too dry air will lead to drying out;
High humidity and contact with water are also unacceptable - the wood will absorb moisture and become deformed when drying;
Best stored in vertical position, but not on the floor;
Skis should be positioned with their toes up;
Do not tie the pair tightly with sliding surfaces towards each other - this can lead to deformation. The best option– the presence of a special spacer.

The ideal conditions for wooden skis are a cool, dark and ventilated room. It is best to store in a hanging vertical position.

If you store wooden equipment correctly, it can last for decades or even centuries, like these antique snowshoes

General rules for storing plastic skis

Equipment made from this material is stronger and more durable. Therefore, the requirements for storage conditions are less stringent:

Can be stored vertically and horizontally;
It is not necessary to install a spacer, they retain their shape perfectly for a long time without it;
Sliding surfaces should not touch - you can use a layer of fabric or store equipment with your toes facing each other;
During the season and off-season it can be stored in a special case.

Plastic skis can be kept at room temperature or outside, the main thing is to create a protected place for them so that they do not receive mechanical damage.

Features of storing recreational, mountain and hunting skis

Skis, depending on the type, have different sizes and shape, these features should be taken into account when choosing a storage location. They also differ in cost; while walking ones are available to everyone, not many can afford mountain ones; to extend the life of expensive equipment, sometimes it’s worth sacrificing one thing square meter living space.

Walking

The smallest and most inexpensive. Made from wood or plastic. Can be stored year-round in a special cross-country ski bag in a dark and cool place. The main thing is not to leave moisture from melted snow on them and not to subject them to mechanical stress.

Mountain

Skis bigger size. Storage alpine skiing It is not recommended to use it inside a case; it is better to hang it on a wall or in a closet. Since they are made from a combination of materials: wood or foam filler (inner part), wood or plastic (for the upper and lower outer parts), metal (fastenings, edgings) - careful processing is required before long-term storage.

The sliding surface is covered with paraffin, and the metal parts with a special ointment to prevent rust. The presence of a wooden core requires that equipment be stored in low humidity and in a cool room.

Hunting

They will require a lot of space to store them, since hunting skis are wide and long. They are most often made of wood, but can also be found in plastic. Metal is not used for fastenings - in most cases it is durable fabric, rubber or leather.

For hunting skis made of wood, the microclimate is especially important. They need to be kept in a place with low humidity and low temperature. The best position is hanging vertically, with your toes up.

If space allows, you can purchase or make similar storage racks

Storing equipment in winter

During the height of the ski season, you need to take care of your equipment after every skiing or hunting trip. It is also important to transport skis correctly to the place of use so as not to damage them on the road.

Basic rules for caring for equipment in winter:

Wipe dry soft cloth after each use;
You can put it in a cover only after the surface has dried;
For temporary storage, a dark, dry place, away from heating devices and sunlight, where you can place your skis vertically with your toes up;
The sliding surface must be lubricated in a timely manner, fasteners repaired and edges sharpened;
It should be transported with sliding surfaces inward to avoid scratches, you can use a layer;
To prepare your equipment for a long journey, you need to secure it with rubber bands at the toes and heels, wrap it in soft cloth and put it in a case.

Shoes need to be dried after every walk. Absolutely not suitable for this purpose heating devices. It is best to crumple the paper and place it tightly inside the shoe and dry at room temperature.

How to store equipment in summer

After the end of the ski season, the equipment must be prepared for long periods of downtime. To do this, you need to carry out complex processing and find appropriate place for content.

Storage in summer period, Preparation:

Clean the surface of any dirt and old grease, wipe dry;
Clean with fine sandpaper unevenness and roughness;
Apply several layers of varnish to damaged areas where there are chips or scratches;
Preserve sliding surface lubricant. For wooden skis - with resin, for plastic skis - with paraffin;
If the skis are wooden, then they need to be tied on both sides and a spacer made of wooden block(10 cm);
Bandage the plastic ones and place a layer between the contacting surfaces.

Skis can be packed in a cover or stored in the summer without it in a ventilated, dry place, away from light rays and the risk of mechanical damage.

On sale you can find a variety of options for portable cases, including those that are attached to a car.

Arrangement of storage space

The ideal positions for skis are suspended vertically or horizontally with three points of support.

How and where you can store equipment in the apartment in the summer, several options:

In a closet on glazed balconies. It will protect against direct sun rays and will not allow your skis to dry out. You can install a hook inside the cabinet and hang a ski bag or a bunch of skis on it.
Ski storage bracket. You can buy ready-made or make your own from metal corners and a couple of boards. The bracket can be installed under the ceiling inside the apartment or on a loggia or balcony.
In a pantry or dressing room, you can hang a bunch of skis on the wall or make a horizontal rack if there are a lot of pairs.

So that the skis serve for a long time, it is important to care for them not only during the season, but also before storing them. The equipment must not come into contact with liquids or be exposed to direct sunlight. For storage, it is better to choose a place that is not used in the summer, since every ski fall may be the last for them.

Mounting skis on the wall in an apartment with your own hands. Video

With the arrival of winter, training for fresh air acquire their own unique flavor. When buying skis or a snowboard for quality time, we must not forget that for long storage Equipment must be purchased and special racks for skis. They will save space in your rental office, plus everything else you can choose a design for organic integration into your everyday environment. They can also be transported without problems.

You will do the right thing if you purchase ski racks from us:

the likelihood of product damage will be reduced ahead of schedule due to improper storage of inventory;
racks can be placed easily and quickly;
the cost of the product is adequate and lower than imported analogues;

Will ski racks be the key to successful outdoor activities?

Undoubtedly. The design of these ski racks is such that even when used at a mountain resort there will be no problems with storing skis or snowboards. In addition, it is worth recognizing that with the current development tourism business it makes sense to finally conquer new peaks in the most unexpected places in the world. And any useful device should be done so that there is less time for assembly, and more time for rest. You also need to take into account the fact that metal racks are incredibly reliable and you should not have any worries about the integrity of this product at all. If you are going to spend your holiday profitably, then this Sports Equipment will be incredibly useful in any case.