Device of living and dead water treatment. Treatment of living and dead water

This article describes how to do do-it-yourself device "live" and "dead" water, it is also called a water activator. It is known that if you place two electrodes in water and apply a constant voltage to them, then ordinary drinking water becomes activated. Water in the process of activation is divided into positive and negative ions and the solutions obtained in this way have special medicinal properties.

Water with negative ions is called catholyte, or as people call it “Living”, water with positive ions is called anolyte or “Dead”. In order for the two types of water not to mix, an ion-exchange partition must be placed between the electrodes.

Features of "living water": has an alkaline environment and has the property of a strong biostimulator. Basically, it is used in medicine for the treatment of various ulcers and wounds. It can be used on the farm to improve the growth of flowers and seedlings, for bathing animals, preparing animal feed, as well as processing vegetables and fruits for long-term storage.

Features of "dead water": has an acidic environment and creates a strong sterilizing and disinfecting effect. In this regard, it is used to treat various skin diseases, and is also used in household for disinfection of premises, disinfection drinking water, processing dishes.

Description of the device for obtaining "living" and "dead" water

The device for the preparation of living and dead water can be made by hand. All you need is a diode bridge, stainless steel electrodes, and a piece of tarpaulin as a separating membrane.

The mains voltage, having passed through the diode bridge in the form of a constant voltage, is applied to the electrodes, which are placed in a jar of water. Moreover, one of the electrodes (positive electrode) must be placed in a tarpaulin bag, in which water must also be poured. Subsequently, “dead” water will form in it, and “live” water in the rest of the jar. Canvas bag can be sewn with your own hands. Its dimensions can be arbitrary, as long as the electrode freely enters it. The dimensions can be taken as follows: diameter is 7 cm, and a height of about 20 cm. A jar can be used 800 ml or 1 liter.

It is necessary to pay attention to the material from which the electrodes are made. Typically, stainless steel is used. But it is necessary to use food grade stainless steel for these purposes. Since technical stainless steel contains impurities heavy metals, and during the operation of the device, they can be released into the water, which is not good.

The electrodes are made of a sheet with a thickness of 0.6 ... 1.0 mm and have dimensions of about 40x160 mm. They must be fixed on a piece of plastic a little larger than the neck of the can. The distance between the electrodes should be on average about 4 cm. It is also necessary to install a diode bridge and a switch on it. For electrical safety, close everything from above with a suitable cover. For convenience, the device circuit can be supplemented on a microcontroller or.

How to work with the device

We put a canvas bag in an empty jar, pour water into it and into the jar. Next, we place the electrodes in a jar, taking into account that the positive electrode must be inserted into a canvas bag. We turn on the device in the network and wait from 3 to 15 minutes, depending on what concentration we need the solution.

After the electrolysis time has elapsed, first DISCONNECT THE APPLIANCE FROM THE MAINS!

Next, quickly remove the bag of "dead" water from the jar and pour into any container. If this is not done immediately, then after a short period of time both solutions will mix and the special properties will disappear.

After electrolysis, it is necessary to store "live" and "dead" water in a dark container with a tight lid. "Live" water can be stored for about a month, but "dead" water no more than 2 hours. Therefore, it is better to use the solutions immediately after manufacture and not store them for a long time.

Attention! Since the circuit elements are under mains voltage, electrical safety measures should be observed when working with the device.

Living and dead water is the result of electrolysis. It is obtained using special devices that endow the liquid with a positive or negative electrical potential. At the same time, the resulting living water (with negative potential) has a more alkaline structure, and has healing properties, dead (positively charged) water has an acidic structure, and has disinfectant properties.

It has also been proven that the quality of the liquid is significantly improved in the process of electrolysis - harmful impurities and chemical compounds, pathogenic bacteria, microbes, and fungi are removed.

Live treatment and dead water- is one of the most effective methods folk medicine!

Application aqueous solutions treated with electric current, promotes accelerated recovery from many diseases of the gastrointestinal tract, respiratory tract, cardiovascular and nervous system, liver, kidneys, etc.

Living and dead water It is effective not only in the treatment of diseases, but also for prevention, as well as general health promotion. The article posted on this page of our website will tell you more about all this in more detail.

Article by Gennady Malakhov about Living and Dead Water

I receive a lot of letters on this topic with a lot of questions, let's start in order.

• Can it be used on your system "living" and "dead" water produced by electrolysis?
• What's happened Living and Dead Water how to cook it?
• Where can I buy or how to assemble device for the preparation of living and dead water?
• How safe application of Living and Dead water?
• What diseases are susceptible treatment with Living and Dead water what results to expect?
• And who wants to immediately buy the device click here "Devices Living and dead water"
  

In the 80s of the last century, leading scientific institutes and medical clinics became interested in activated water. Soviet Union. True, most of the studies were not advertised.

But information leaked into society and interested people - healers and doctors - learned about it. Especially since abroad scientific work conducted openly, and their results were published even in the press available behind the Iron Curtain, that is, in our homeland.

Official science has recognized that water that has received a negative redox potential during electrolysis, that is, living water, has high immunostimulating, regenerating and detoxifying properties, that is, meaning that it can be successfully used to treat many diseases. These unique properties of the catholyte were confirmed by the Pharmacological Committee of the USSR (Decision No. 211-252/791).

What about dead water?

Its characteristics were also not questioned, because the anolyte solution, thanks to its antibacterial activity, has already saved hundreds of people from rotting wounds and bedsores.

It is difficult to determine which of the activated water solutions is more important for human health, because both catholyte and anolyte are like two halves of a single whole - a medicine created by nature itself. But nature never makes mistakes, it only offers its help to man. To be able to use this help is the task of each of you. And I will only talk about the many years of experience that people have gained in search of truth, because people need proof. Well, here they are.

Medicinal properties of Living and Dead water

Obtaining "Living" and "dead" water takes place by electrolysis. "Living" water has pronounced alkaline, healing properties, and "dead water"- acidic, disinfectant properties. I think passing electric current through water, it also changes its internal structure, erasing harmful environmental information.

As a result of treatment with electric current, water acquires healing properties. Depending on the disease, the stage of its development, alkaline - “living” or acidic - “dead” water is used.

Activated water quickly and effectively treats many diseases, without any "chemistry". It is used in the household, at home, in the garden and in the garden, for hygiene purposes, in animal husbandry and poultry farming, etc.

The effectiveness of activated water increases also because in the process of electrolysis "dead" water becomes positive and "living" water- negative electric potential. It becomes, as it were, a weak electrolyte, which quickly interacts with body fluids (gastric juice, blood, lymph, intercellular fluid, etc.).

The human body is energy system. The long-term practice of using activated water confirmed the conclusions of scientists that it is the positive and negative charges of this water that greatly contribute to maintaining the energy balance of cells.

Activated water is used in Japan, Austria, Germany, Poland, India, Israel, CIS countries. This water is absolutely not dangerous for either external or internal use. This was confirmed back in 1988 by the Pharmacological Committee of the USSR (DESOLUTION Mo. 211-252 * / 791).

As an example, I will give several ways to use living and dead water.

At the beginning of 1981, the author of the device (Krotov) for preparation of "live" and dead water, fell ill with inflammation of the kidneys and prostate adenoma. In the hospital, he was treated for more than a month and ... they suggested that he undergo an operation for an adenoma. He refused the "offer" and was discharged.

The first test received "Living and Dead" water the author of the device spent more than 6 months on a wound on his son's arm that did not heal.

The test of treatment performed exceeded all expectations: the wound on the son's arm healed on the second day. Then the author of the device himself began to drink "living" water 0.5 cups before meals 3 times a day and felt cheerful. The adenoma disappeared within a week, as did the sciatica and swelling of the legs.

To check the effectiveness of the treatment done, the author of the device, after a week of taking "living" water, underwent an examination in the clinic with all the tests, in which not a single disease was detected. In addition, blood pressure returned to normal.

The boy's gums festered for 6 months, an abscess formed in his throat. Application various ways treatment did not give the desired result. For treatment, the author of the device recommended rinsing the throat and gums with “dead” water 6 times a day (i.e., disinfecting), and then taking a glass of “living” water inside. The result is a complete recovery within 3 days.

This water can be used with great success in various cleansing procedures - enemas, "Shell Gesture", mouthwash, and for women and vaginas.

dead water

So, dead water, or anolyte, is an acidic solution and has strong bactericidal properties. It looks like a colorless liquid with an acid smell, but it tastes sour and slightly astringent. Its acidity is from 2.5 to 3.5 5 mV.

Because the dead water has bactericidal properties, it is an excellent disinfectant.

dead water It is successfully used for disinfection of linen, utensils, bandages and other medical materials, as well as rooms.

This water can be used to treat the room where the patient is located in order to prevent re-infection and infection of relatives, dead water is treated bed sheets and beds, if insects are wound up in the house - fleas, bedbugs.

And for health, dead water is an unsurpassed remedy for colds. It is used for diseases of the throat, nose, ears. Gargling is a means of treating and preventing influenza and acute respiratory infections.

But these functions use of dead water is not limited. With its help, they lower blood pressure, calm the nerves, get rid of insomnia, reduce pain in the joints of the arms and legs, destroy the fungus, treat stomatitis, and dissolve stones in the bladder.

dead water retains its properties for quite a long time - within 1-2 weeks of weeks when stored in closed vessels.

living water

Living water, or catholyte, is an alkaline solution and has strong biostimulant qualities. This water tastes slightly alkaline, but is as colorless as anolyte. The acidity of living water ranges from 8.5 to 10.5 5 mV.

Since living water is a natural biostimulant, it perfectly restores immune system body, provides antioxidant protection of the body, especially in combination with the use of vitamins, is a source of vital energy.

Living water activates all the biological processes of the body, increases blood pressure, improves appetite, metabolism, and improves overall well-being.

It quickly heals various wounds, including stomach and duodenal ulcers, bedsores, trophic ulcers, burns. This water softens the skin, gradually smoothes wrinkles, destroys dandruff, improves hair structure.

Living water justifies its name everywhere. Even withered flowers come to life when placed in a vase filled with living water. In agriculture, living water is an indispensable assistant. Watering with this water repeatedly increases the yield of berries and fruits.

Living water can be called a double medicine, because it provides direct assistance to the body, and also enhances the effect of herbal medicines that the patient takes. By the way, the plants on the windowsill also acquire "live" strength under the influence of spraying and watering with living water.

The only disadvantage of living water is that it quickly loses its biochemical and medicinal properties, since it is an active unstable system. If stored in a closed container in a dark place, it can be used for two days. Currently, a lot of devices for the preparation of living water are being developed.

The developers of these devices set themselves the task of extending the properties of water after its preparation. Dina Ashbar, who has her own clinic and production facility in Germany, managed to extend the therapeutic effect of living water up to a month, but as she writes, “this requires additional rather expensive equipment.”

In view of the fact that most diseases of the vagina occur due to the fact that its acidity is disturbed (rots), the use of “dead” - acidic water quickly destroys decay and restores health.

In the beginning, you need to apply "dead" water. When the infection is destroyed, then it is necessary to apply "living" water to accelerate the healing of the mucous membranes of the vagina, vagina, cervix.

For this, rinsing with a rubber pear is used, and “dead” water is made “stronger” - with increased acidity (you can get water much more acidic than your own urine - this is the strength of this method). So, wash the vagina with “dead water” 3-5 times a day, and at the end of the day “live”, 2 times. It all depends on the circumstances and the severity of the disorder.

In the same way, you can use this water for enema. With dysbacteriosis, use acidic - "dead" water. After 2-3 enemas (one enema per day) do 1-2 with "living" water. And so several times. Something like this should be done with colitis of the large intestine.

It is very good to treat young children with these types of water - it is harmless (naturally, everything should be in moderation).

Activated water several times enhances the healing properties of the golden mustache, cinquefoil and other herbs, as if created by nature to treat people. Activated water has great value and for growing a green first aid kit at home. My favorite golden mustache grows in a matter of weeks if watered and sprayed with activated water.

Prepared "live" and "dead" water can be stored for a very long time without losing its properties. (A test of water in the laboratory of the Stavropol Vodokanal (“live” fortress 11.4 units and “dead” - 4.21 units) showed that the fortress decreased by hundredths of units over the month, and the temperature does not affect the decrease in water activity. )

Now devices for the preparation of Living and Dead Water are sold everywhere, you can purchase and use. Currently, tables have been compiled for the treatment of a number of diseases using "live" and "dead" water.

1. Prostate adenoma.

Within 5-10 days, 4 times a day, 30 minutes before meals, take 1/2 cup of "live" water.

After 3-4 days, mucus is released, there is no desire to urinate often, on the 8th day the tumor disappears.

2. Angina.

For 3-5 days, gargle with "dead" water 5 times a day after meals and drink 1/4 cup of "live" water after each rinse.

The temperature drops on the 1st day, usually on the 3rd - the disease disappears.

3. Allergy.

For three days in a row, after eating, rinse your mouth, throat and nose with “dead” water. After each rinse, after 10 minutes, drink 1/2 cup of "live" water. Rashes on the skin (if any) moisten with "dead" water. The disease usually disappears in 2-3 days. It is recommended to repeat the procedure for prevention.

4. Pain in the joints of the arms and legs.

3 times a day before meals, take 1/2 cup of "dead" water for 2-5 days

The pain stops on the 1st day.

5. Bronchial asthma; bronchitis.

For three days, 4-5 times a day, after eating, rinse your mouth, throat and nose with heated "dead" water. In 10 minutes. after each rinse, drink 1/2 cup of "live" water. If there is no noticeable improvement, do an inhalation with "dead" water: heat 1 liter of water to 70-80 ° C and breathe in its steam for 10 minutes. Repeat 3-4 times a day. The last inhalation can be done with “live” water and soda. Decreased urge to cough, improves general well-being. If necessary, repeat the course of treatment.

6. Inflammation of the liver.

Every day for 4-7 days, take 4 times 1/2 cup: on the 1st day only "dead" water, in the next - only "living" water.

7. Inflammation of the colon (colitis).

On the first day, it is better not to eat anything. During the day, 3-4 times drink 1/2 cup of "dead" water with a "strength" of 2.0 pH. The illness resolves within 2 days.

8. Gastritis.

For three days, 3 times a day, 1/2 hour before meals, drink "living" water. On the first day 1/4 cup, on the rest 1/2 cup. If necessary, you can drink another 3-4 days. Pain in the stomach disappears, acidity decreases, appetite and general well-being improve.

9. Herpes (Cold).

Before treatment, thoroughly rinse the mouth and nose with "dead" water and drink 1/2 cup of "dead" water. Remove the vial with the contents of herpes with a cotton swab moistened with heated "dead" water. Further, during the day, 7-8 times for 3-4 minutes, apply a swab moistened with "dead" water to the affected area. On the second day, drink 1/2 cup of "dead" water, repeat the rinse. Apply a swab dipped in "dead" water to the formed crust 3-4 times a day. You need to be a little patient when you break the bubble. Burning and itching stop within 2-3 hours. Herpes resolves within 2-3 days

10. Hemorrhoids.

For 2-7 days in the morning, wash the cracks with “dead” water, and then apply tampons with “live” water, changing them as they dry

Bleeding stops, cracks heal within 2-3 days.

11. Hypertension.

During the day, take 2 times 1/2 cup of "dead" water.

The pressure is back to normal.

12. Hypotension.

During the day, 2 times take 1/2 cup of "living" water.

Pressure normalizes

13. Worms (helminthiasis).

Make cleansing enemas, first with “dead” water, and after an hour with “living” water. During the day, drink every hour two thirds of a glass of "dead" water. Next day to restore health, drink 0.5 cups of "living" water half an hour before meals. Feeling may be unimportant. If after 2 days recovery has not occurred, then repeat the procedure.

14. Purulent wounds.

Rinse the wound with "dead" water, and after 3-5 minutes moisten with "living" water, then moisten only with "living" water 5-6 times a day.

Within 5-6 days, healing occurs.

15. Headaches.

Drink 1/2 cup of "dead" water.

The pain goes away in 30-50 minutes.

16. Fungus.

Wash areas affected by the fungus thoroughly with hot water. laundry soap, wipe dry and moisten with "dead" water. During the day, moisten with "dead" water 5-6 times and let dry without wiping. Wash socks and towels and soak in "dead" water. Similarly (you can once) disinfect shoes - pour “dead” water into it and let it stand for 20 minutes. The fungus disappears within 4-5 days. Sometimes the procedure needs to be repeated.

During the day, rinse your nose and mouth with "dead" water 8-12 times, and drink 1/2 cup of "living" water at night.

During the day, the flu disappears.

18. Diathesis.

Moisten all rashes, swellings with "dead" water and let dry. Then make compresses with "live" water for 10-5 minutes. Repeat the procedure 3-4 times a day. The affected areas heal in 2-3 days.

19. Dysentery.

On this day, it is better not to eat anything. During the day, 3-4 times drink 1/2 cup of "dead" water with a "strength" of 2.0 pH. Dysentery passes during the day.

20. Jaundice (Hepatitis).

3-4 days, 4-5 times a day, 1/2 hour before meals, drink 1/2 glass of "live" water. After 5-6 days, see a doctor. If necessary, continue treatment. Feeling better, appetite appears, the natural complexion is restored.

21. The smell of feet.

Wash your feet with warm water, wipe dry, moisten with "dead" water, and after 10 minutes - with "live" water and let dry

The bad smell will disappear.

Drink 0.5 glass of "live" water. You can make an enema from warm "living" water.

23. Toothache.

Rinse your mouth with "dead" water for 5-10 minutes. The pain disappears.

24. Heartburn.

Drink 1/2 glass of "live" water.

Heartburn stops

25. Colpitis.

Warm up "dead" water and "live" to 37-40 ° C and douche at night first with "dead" water, and after 15-20 minutes - with "live" water. Repeat the procedure for 2-3 days.

After one procedure, colpitis disappears.

26. Conjunctivitis, barley.

Rinse the affected areas with warm water, then treat with heated "dead" water and allow to dry without wiping. Then, for two days, 4-5 times a day, make compresses with heated "living" water. At night, drink 1/2 glass of "live" water. The affected areas heal in 2-3 days.

27. Ringworm, eczema.

Moisten the affected area with “dead” water for 3-5 days and let it dry, then moisten it with “living” water 5-6 times a day. (In the morning, moisten with "dead" water, after 10-15 minutes with "live" water and 5-6 more times with "live" water during the day.)

Heals in 3-5 days.

28. Washing hair.

Wash your hair with shampoo, wipe it off, moisten your hair with "dead" water, and after 5 minutes with "live" water.

Dandruff disappears, hair becomes softer, healthier.

In the presence of dropsy bubbles, they must be pierced, moisten the affected area with “dead” water, and after 5 minutes “live”. Then during the day moisten with “living” water 7-8 times. Procedures to carry out 2-3 days.

Burns heal in 2-3 days.

30. High blood pressure.

In the morning and evening, before eating, drink 1/2 cup of "dead" water with a "strength" of 3-4 pH. If it does not help, then after 1 hour drink a whole glass. The pressure normalizes, the nervous system calms down.

31. Low blood pressure.

In the morning and in the evening, before eating, drink 1/2 cup of "living" water with pH = 9-10. The pressure normalizes, there is a surge of strength.

Drink 1/2 cup of "dead" water, if diarrhea does not stop within an hour, repeat the procedure.

Abdominal pain stops after 20-30 minutes.

33. Polyarthritis, arthritis, osteochondrosis.

Full cycle of treatment - 9 days. Drink 3 times a day 30-40 minutes before meals: - in the first three days and 7, 8-9 days, 1/2 cup of "dead" water; - 4th day - break; - 5th day - 1/2 cup of "living" water; - 6th day - break.

If necessary, this cycle can be repeated after a week. If the disease is running, then you need to apply compresses with warm "dead" water to the sore spots. Joint pain disappears, sleep and well-being improve.

34. Cut, prick, tear.

Rinse the wound with "dead" water and bandage it.

The wound heals within 1-2 days.

35. Cold of the neck.

Make a compress on the neck, soaked in warm "dead" water, and drink 4 times a day, 1/2 cup before meals.

The disease disappears within 1-2 days.

36. Prevention of insomnia, increased irritability.

At night, drink 1/2 cup of "dead" water. Within 2-3 days, 30-40 minutes before meals, continue to drink "dead" water in the same dosage. Avoid spicy, fatty and meat foods during this period. Sleep improves, irritability decreases.

37. Prevention of acute respiratory infections, colds during epidemics.

Periodically, 3-4 times a week in the morning and in the evening, rinse the nose, throat and mouth with “dead” water. After 20-30 minutes, drink 1/2 cup of "live" water. In case of contact with an infectious patient, perform the above procedure additionally. It is advisable to wash your hands with "dead" water. Vigor appears, efficiency increases, general well-being improves.

38. Psoriasis, psoriasis.

One cycle of treatment - b days. Before treatment, wash thoroughly with soap, steam the affected areas, with the maximum tolerable temperature, or make a hot compress. Then, moisten the affected areas with plenty of heated "dead" water, and after 8-10 minutes begin to moisten with "living" water. Further, the entire treatment cycle (i.e., all 6 days) should be washed 5-8 times a day on the affected areas only with "live" water, without prior washing, steaming and treatment with "dead" water. In addition, in the first three days of treatment, you need to drink 1/2 cup of "dead" food before meals, and on days 4, 5 and 6 - 1/2 cup of "live" food.

After the first cycle of treatment, a week break is taken, and then the cycle is repeated several times until recovery. If during the treatment the skin dries out a lot, cracks and hurts, then you can moisten it several times with “dead” water.

At 4-5 days of treatment, the affected areas of the skin begin to clear, clear pinkish areas of the skin appear. Gradually, the lichen disappears completely. Usually 3-5 treatment cycles are enough. You should avoid smoking, drinking alcohol, spicy and smoked foods, try not to be nervous.

39. Radiculitis.

During the day, 3 times before meals, drink 3/4 cup of "living" water. The pain disappears within a day, sometimes after 20-40 minutes.

40. Expansion of veins, bleeding from torn knots.

Rinse the swollen and bleeding parts of the body with "dead" water, then moisten a piece of gauze with "live" water and apply to the swollen areas of the veins.

Inside, take 1/2 cup of "dead" water, and after 2-3 hours start taking 1/2 cup of "live" water at intervals of 4 hours 4 times a day. Repeat the procedure for 2-3 days.

The areas of swollen veins resolve, the wounds heal.

41. Acne, increased peeling of the skin, acne on the face.

In the morning and evening, after washing, 2-3 times with 1-2 minute intervals, rinse the face and neck with “living” water and allow to dry without wiping. Make compresses on wrinkled skin for 15-20 minutes. In this case, the "living" water should be slightly warmed up. If the skin is dry, then first it must be washed with "dead" water. After 8-10 minutes, do the above procedures Once a week, you need to wipe your face with this solution: 1/2 cup of "live" water, 1/2 tablespoon of salt, 1/2 teaspoon of soda, after 2 minutes, rinse your face with "live" water.

The skin is smoothed, becomes softer, minor abrasions and cuts are tightened, acne disappears and peeling stops. With prolonged use, wrinkles almost disappear.

42. Removal of dead skin from the feet.

Soak your feet in soapy water, wash them in warm water, and without wiping wet your feet in heated “dead” water, rubbing areas with growths, remove dead skin, wash your feet in warm water, wipe dry.

43. Improving well-being, normalization of the body.

In the morning and evening after eating, rinse your mouth with “dead” water and drink 1/2 cup of “living” water with an alkalinity of 6-7 units.

44. Cholecystitis (inflammation of the gallbladder).

For 4 days, 3 times a day, 30-40 minutes before meals, drink 1/2 glass of water: the 1st time - "dead", the 2nd and 3rd times - "live". "Living" water should have a pH of about 11 units. Pain in the region of the heart, abdomen and right shoulder blade disappear, bitterness in the mouth and nausea disappear.

45. Eczema, lichen.

Before treatment, steam the affected areas, then moisten with “dead” water and allow to dry. Further, 4-5 times a day, moisten only with “living” water. At night, drink 1/2 glass of "live" water. The course of treatment is a week. The affected areas heal within 4-5 days.

46. ​​Erosion of the cervix.

Douche at night warmed up to 38-40 ° C "dead" water. After 10 minutes, repeat this procedure with "live" water. Further, repeat the washing with "live" water several times a day. Erosion resolves within 2-3 days.

47. Gastric and duodenal ulcer.

Within 4-5 days, 1 hour before meals, drink 1/2 cup of "living" water. After a 7-10 day break, repeat the treatment. Pain and vomiting stop on the second day. Acidity decreases, the ulcer heals.

Note.

When ingesting only "living" water, thirst arises, it must be quenched with compote or acidified tea. The interval between taking “dead” water and “live” water should be at least 2 hours.

Alkaline water is considered to be such water, in which the pH is 10-11 units (it has a white precipitate). Acidic water is considered to be one in which the pH is 4-5 units.

How to prepare water is described in the instructions for the device.

"Living" and "dead" water is an excellent supplement to the system of natural healing.

As you may have noticed, the use of Living and Dead Water does not require any skills, knowledge, everything is done very simply and a confident result is achieved in a fairly short period of time, which is a huge plus for this type of treatment.

Pay attention to the widest range of action of Living and Dead Water, about 50 different diseases can be cured, and how many more options domestic use. In a word, for almost all occasions, I was very impressed.

Now let's talk directly about the device itself for obtaining Living and Dead water. Now there are many different types of devices on the market (Melesta - made in Ufa, Zhivitsa - made in China), there are also home-made devices using a fire hose (I do not advise using these), there are also officially made by various enterprises, I personally tried a lot and settled on the product, produced in Belarus by the research and production enterprise "Akvapribor".

Of all the devices I have seen, I think the AP-1 apparatus is the most correct. It uses very quality materials production, this is high-quality food-grade plastic, a unique method of manufacturing electrodes from noble metals (titanium, platinum), a very high-quality ceramic glass made of a special type of clay that acts as a diaphragm, a very nice appearance of the product. Together, this gives the effect that the inventor of the Kratov device achieved.

The device has passed all possible tests, and has all the necessary certificates of conformity.

Household water activator (electroactivator) AP-1- a light, not complicated, compact device that allows everyone at home in just 20-30 minutes to get about 1.4 liters of activated ("live" and "dead") water. To do this, it is enough to fill the vessel with water, plug the plug into a 220V socket and after 20-30 minutes. Drain the already activated water into different vessels. The device is electrically safe, reliable, and consumes electricity like a 40 watt light bulb.

The main differences and advantages of the AP-1 device

• Four-electrode switching circuit: 2 anodes and 2 cathodes.
• The anodes are made of ultra-pure titanium coated (black on the side of the passage of electric current) from a platinum group metal, the cathodes are made of food grade stainless steel.
• As a membrane, a construction in the form of a ceramic microporous cup (from clay used in the production of food utensils) made using a special technology is used.
• The coating is applied to the anodes in order to prevent the destruction of the anodes during electrolysis and the penetration of ions of heavy metals chromium, nickel, vanadium and other metals into the water, which are not excreted from the body.
• In order to ensure electrical safety and compliance with the requirements of GOST, a switching power supply with reduced voltage and galvanic isolation from the 220 V mains is used as a power source.
• The design provides for additional safety measures in the form of a limit switch used to turn off the power from the electrode system when the top cover of the electric activator is removed.

The device for the preparation of "Living and Dead Water" - "Melesta"

There is another device that I also recommend, this is device for preparing "Alive and Dead" water "Melesta"- this device is made of cheaper materials than AP-1: so instead of a ceramic glass, a fabric glass is used (acts as a diaphragm), and instead of 4 electrodes made of high-quality alloys, ordinary 2 electrodes made of food steel are used, nondescript appearance of the product, rough execution.

But all this contributed to a significant reduction in the cost of the product compared to AP-1, which is a significant plus for many people whose wealth does not allow them to purchase AP-1, the water obtained by this device has all the properties that water prepared on AP-1, Therefore, I also recommend it to everyone without exception for home use. It has all the necessary certificates of conformity (No. POCC RU. AYa B24400).

The device for the preparation of "Alive and Dead" water "Zdravnik".

Externally, the device is made by analogy with "Melesta" and the Belarusian "AP-1", but in terms of workmanship it is closer to AP-1.

The device is very easy to use, does not require special care and service. It is worth noting the high quality of the electrodes (food grade stainless steel is used), the requirements for electrical safety are met, there is a certificate of conformity (TU - 5156-001-62565770-2010).

As well as AP-1, it has two versions:

• The classic, time-tested version of the device with the use of a fabric glass for "Dead Water".
• Version with the use of a glass for "Dead" water electroosmotic nanostructured ceramics.

A little more about this glass.

glass provides optimal values pH and Redox Potential of the resulting solutions. The glass allows you to visually monitor the process of water activation and allows you to obtain solutions with a higher level of Oxidation-Reduction Potential (ORP).

The principle of the glass:

When carrying out the process on initial stage the necessary polarization of solutions occurs and classical electroosmosis is observed - the liquid is shifted towards the negatively charged electrode (the anolyte level drops). Upon reaching the oxidation

Reduction Potential of the catholyte and anolyte of optimal equilibrium values ​​is repolarized on the walls of the glass and the liquid begins to move in the opposite direction (anolyte level rises).

Due to the greater porosity of the glass, it practically does not clog during operation and requires less maintenance.

Device for preparing "Alive and Dead" water PTV and PTV (Iva 1)

This device is neither externally nor internally (in execution) similar to Melesta, AP-1, Zdranik.

The main purpose of this device is professional activity, can be used in medical institutions, rest homes, dispensaries and of course it can be used at home.

The device is certified and consumes only 75 watts of electricity. (Certificate of Conformity No. ROSS LT. AYa46.A14995San-epidemiological conclusion No. 77.01.06.485.P.06092.03.2) medal in 2005 International Salon of Innovations and Investments.

What are its differences:

The glass for the preparation of "Dead" water is not used, instead of a glass, the device is divided into two parts (the part for "Dead" water is removable), these parts are divided by a membrane made of a special wood fiber.

Outwardly, the device looks very solid, high-quality housing, the electrodes are much thicker, more reliable than other devices, have a long service life, and are made very high quality.

This device also has two options with a regulator and without a regulator, using the regulator you can set the concentration of water, you can make healing drink for everyday use, you can make water for the prevention of diseases or you can make a solution for medicinal purposes.

Melest's new device

The device for preparing Living and Dead Water "Melesta" has been completely redesigned, now it is made according to the principle of the more expensive PTV-A.

The main differences are in the dimensions of the device (approximately 2-2.5 times in volume), it is much smaller than PTV-A, the design of the dead water glass is slightly different, instead of a partition made of wood fiber, a built-in cloth window is used. The electrodes are made in the same way as in PTV-A, but here they are about 5 times smaller and their connection scheme is not entirely successful.

The main trump card is the low price of this device, especially for people with low incomes. The device still does its job perfectly and is very easy to use.

Our online store offers you to buy living and dead water preparation devices:

1. Device for preparing "Alive and Dead" water AP-1 (basic version)
   
2. Device for preparation of "Alive and Dead" water AP-1 (an improved version with an indicator of water quality and the level of contamination of the diaphragm).
   
3. Device for preparing "Alive and Dead" water "Melesta" (economy class device).
   

Remember how in an old Russian fairy tale: in order to revive the hero, you need to sprinkle him with “dead” water, and then give him a drink of “alive” water. Today, "living" and "dead" water is not fiction or fantasy. Of course, in literally it is impossible to revive or kill someone by the action of such water, but such water does have healing properties.

"Living" water alkaline water is considered (pH \u003d 10-11 units). Water softens the skin, has healing properties, has a rejuvenating effect, removes allergies, makes hair silky and healthy.

"Dead" water acid (рН=4-5 units), has good bactericidal and disinfectant properties, is used for rinsing the mouth, throat and nose when colds, reduces blood pressure, destroys eczema, fungus, lichen, helps with diarrhea.

A device for obtaining "live" and "dead" water can be made by hand. To accomplish this task, you will need:

2 stainless steel electrodes;

canvas bag;

Glass container (jar);

Diode rectifier bridge for converting AC voltage to DC;

Power cord with plug;

Plastic cover.

1. To make a canvas bag, you need a non-rubber tarpaulin, you can use a fire hose (50 mm in diameter). The length of the bag must match the height glass jar into which it will be inserted. From the tarpaulin cut to the desired length, make a bag. To do this, one side (the bottom of the bag) is sewn up with a piece of the same tarpaulin or a piece of food-grade plastic is inserted, as in our case.

2. Then two electrodes (25x125x2) are made of stainless steel grade 44 NTCU.

3. Insert the electrodes into the plastic lid (you can use a regular plastic jar lid). In this case, a lid from a plastic coffee maker was used. The distance between the plates is 40 mm.

4. To the electrode plates, according to the diagram shown in Figure 1.

Fig.1 Principal and structural diagram of the device "living" and "dead" water.

A diode rectifier bridge is connected, marking the plus (+) and minus (-) of the output to the plate, for safety reasons, cover the bridge with a lid.

To prepare "living" and "dead" water, you must have:

1. Water source.

2. Water filter: type " ZEPTER ”, or “AQUAPHOR”, or an ordinary jug with a replaceable filter, or some other one at your discretion.

3. A three-liter bottle, inside of which is placed 100 - 150 gr. mineral flint, which contains the element "silicon", shungite can also be used. These minerals can be purchased at the city's Esoteric Shop and another mineral, or semiprecious stone corresponding to your zodiac sign. (I have, for example, a crystal rock crystal or quartz).

Flint is, as a rule, a mineral-organic formation, which contains opal and chalcedony - amorphous and cryptocrystalline varieties of quartz. The basis of these mineral components of flint is silica - silicon dioxide SiO2. The chemical element silicon, which is part of flint in the form of dioxide, is one of the most common substances in nature. Most of earth's crust consists precisely of compounds of this most important chemical element, and silicon is also integral part many organs and tissues human body. In addition to silica, mineral composition flint includes more than 20 chemical elements, among which are Ca, Mg, P, Mn, Cu, Zn, etc. Due to the oxides of manganese and iron present in the composition, flint often has a very diverse color, in which shades of black, red and yellow color. And it is precisely with the unique mineral-organic composition of flint that its ability to activate water and endow it with a mass of various healing properties is associated.

4. Refrigerator, in freezer which provided space for a plastic container with water.

5. Plastic 2-liter container with a lid for installing it in the freezer. (Glass container is not suitable).

6. Electric activator for receivingof "living" and "dead" water, which I made myself. The appearance of the activator is shown in the photo. It consists of the following components:

Two electrodes made of food grade stainless steel with dimensions: 40mm wide, 200mm long and 1mm thick. A hole with a diameter of 6 mm was drilled 10 mm from the edge of the plates for the M6 ​​bolt. After another 10 mm, the plate bends in the form of the letter "G". The plates can be purchased at the Starokonny Market in Odessa. Food-grade stainless steel can be distinguished from technical stainless steel using an ordinary magnet - the magnet does not stick to food-grade steel, since it does not contain nickel. (By the way, according to some studies, the ingestion of increased doses of nickel into the male body causes the appearance of prostatitis and prostate adenoma. Guys!!! Check your spoons and forks!!! In vain our ancestors used silver cutlery!!!);

The mounting box in which the diode bridge of the brand is installed KBU 1010, (can be purchased at the "Radio Market"), designed to convert alternating current with a voltage of 220 volts into direct current of the same voltage. IN mounting box a diode bridge is mounted on a switching strip of 4 contacts and two electrodes are connected. The external view of the installation is clearly visible in the photo. The wires going to the plug, which will be connected to a 220-volt power outlet, are connected to the “A C” contacts. One stainless steel electrode “cathode” is connected to the “-” contact - where “living” water (alkaline) will form, and a second stainless steel electrode “anode” is connected to the “+” contact - where “dead” water (acid) will form . A tarpaulin bag is put on this electrode - a reservoir for collecting "dead" water.dy.

A reservoir for collecting "dead" water, which is a simple bag from an old sleeve of a canvas fire hose. (You can sew yourself from canvas mittens). A tarpaulin is required - it does not allow mixing of "living" and "dead" water.

After making the activator (if it is not possible to make it yourself, you can buy the activator via the Internet, its cost is in the range of 500-700 UAH), we proceed to a simpler operation - obtaining living and dead water. For this:

1. Pour purified water into a three-liter bottle with minerals and leave it for at least 1 day.

1. We go into the kitchen in the evening, usually before going to bed and into a prepared plastic container of 2 liters, pour out the water infused with minerals and put it in the freezer for a day or even two. It is advisable, after 3 or 4 hours (or in the morning) to remove the container with water and collect a thin 1-2 mm layer of ice from its surface. This is the so-called "heavy water" - deuterium, which is considered harmful to humans. After that, the process of freezing water continues.

1. Again we go to the kitchen in the evening, usually before going to bed, we take out frozen water from the freezer. IN plastic container there should be only ice, and it will be transparent along the edges of the container, and a little cloudy in the middle. The cloudy part of the ice must be washed with a hot stream of water from a tap or kettle. Remaining part clear ice in the container is left to defrost overnight.

In the morning you get the so-called “melt water”, which you pour into an empty three-liter bottle, lower the activator into it along with a bag for dead water (previously pouring melt water into it as well), plug the activator into an electrical outlet and maintain the activation time for 5 - 10 min. The readiness to receive "living" water can be approximately determined by hand by the temperature on the surface of the bottle - it should not exceed 30 -37 degrees Celsius.

ATTENTION!!!

FOR SAFETY, DO NOT REMOVE THE ACTIVATOR FROM THE BOTTLE WHEN IT IS POWERED ON.

ALWAYS AFTER WATER ACTIVATION, THE FIRST THING IS TO DISCONNECT THE ACTIVATOR BY PULLING THE PLUG FROM THE SOCKET!!!

And this information is for the curious (from the site http://vital.in.ua).

Physics of the water activation process

When a potential difference is applied, the volume of water between the electrodes is exposed to an electric field, and an electric current begins to flow through the electrolyte.

Electroactivation of water is based on the transfer of ions and electrons through a semi-permeable membrane placed in an electrolyte solution, when a potential difference is created in the liquid on both sides of the membrane. In the process of electroactivation in the cathode chamber, a catholyte is obtained - alkaline (“living”) water, in the anode chamber - anolyte, acid (“dead”) water.

In the cathode chamber, water is enriched with highly active reducing agents, which leads to the formation of insoluble metal hydroxides, which precipitate:

Men+ + nOH– → Me(OH)n

Hydroxides of light metals (Na, K) do not precipitate and remain in a dissolved form - 100%.

In addition, direct reduction of multiply charged cations occurs in the cathode chamber (i.e., precipitation of metal molecules):

Men+ + ne → Meо.

These processes reduce the toxicity of water due to the presence of heavy metal ions many times over.

Scheme of electroactivation of water

K - cathode; A - anode; Men+ are metal ions;

M - semi-permeable membrane;

1 – cathode chamber; 2 – anode chamber.

In the anode chamber, water is saturated with highly efficient oxidizing agents. It is known that of all the processes of destruction of organic substances in water, the most powerful is the electrolytic oxidation at the anode. The gases (CO2, SO2, NO2, N2, H2S, Cl2, O2, H2) formed in the process of electrolysis (destruction of microorganisms, decomposition of salts), and gases dissolved in water, evaporate in the near-electrode zone.

High redox potential and special forms active chlorine compounds formed at the anode and involved in oxidation reactions exclude the formation of toxic organochlorine substances and provide complete oxidative degradation of dioxins (С12Н4О2Сl4).

During the electrolysis of water with an inert anode (graphite, Ecosil), oxidation and reduction of water molecules occur on the electrodes according to the reactions:

at the cathode 2Н2О + 2е → Н2 + 2ОН–,

2Н2О + 2Na+ + 2е → 2Na OH + Н2.

at the anode 2Н2О – 4е → О2 + 4Н+.

In the presence of cyanides in water, the process of their oxidation by ozone occurs:

NH2CONH2 + O3 → N2 + CO2 + 2H2O.

Ozone oxidizes ferrous iron and manganese:

Mn2+ + O3 + H2O → MnO2 + O2 + 2H+;

2Fe2+ + O3 + 3H2O → 2Fe(OH)3,

Antioxidants (or rather, electronic antioxidants) are the most important vitamins E, C, PP, K, and a number of vital substances included in food, the resulting ferric iron in the form of hydroxide precipitates.

Tetraethyl lead Pb(C2 H5)4 is also oxidized:

Pb( C2 H5)4 + 2 O3 → PbO2 + 4 CH3 CHO.Highly active oxidizing agents attack organic compounds and lead to their complete destruction (including nitrates, nitrites, herbicides, pesticides). For example, chlorophenol decomposes according to the reaction:

C6H5OCl + 26OH→ 6CO2 + 15H2O + HCl

Due to the saturation of the cathode chamber with hydroxyl groups OH-, alkaline water is obtained here, and the anode chamber with hydrogen ions H + - acidic water .

So, you have received a special and healing "living" water.

WHAT IS THE SPECIFICITY AND HEALING ABILITY OF "LIVING" WATER AND WHAT PARAMETERS SHOULD BE CHECKED TO MAKE SURE IN ITS USEFULNESS?

“The operation of the device is based on the principles of wave superposition, i.e. interaction of the spectral components of impurities and the information carrier in antiphase, due to the fact that the phase of oscillations of the spectral components of impurities is determined with small fluctuations (~ 10 degrees) relative to the phase of oscillations of the same components of the information carrier.

Did you understand anything??? Well, ... of course, ... the principles of wave superposition ... are known to everyone - this is ... “quite simple”, and the rest is some kind of “nonsense”. I took this from a site offering "Akvadisk" for "structuring" water. It is assumed that after applying such a disk, we will get "living" water. I leave it on the conscience of the "inventors" to use such a disk, since I believe that instead of "structured" water we will get "ahinezirovannaya" water. Well, it's just for humor.

But, all the same, how to answer the above question?

There is a lot of information about the usefulness of "living" water on the Internet, and not only, and you, if you wish, can verify this.

I will briefly outline the main generally accepted properties of "living" and "dead" water:

- "LIVING" WATER(catholyte, alkaline water, biostimulant) - a very soft, colorless liquid with an alkaline taste, pH = 8.5-10.5. During activation, precipitation falls in it - all water impurities, incl. and radionuclides and water is purified. It retains its properties for several days when stored in a closed vessel.

This water is an excellent stimulant, restores the body's immune system, provides antioxidant protection to the body, especially in combination with the use of vitamins, a source of energy. It is not in vain that it was called "living" water. It activates the body's bioprocesses, normalizes blood pressure, improves appetite, metabolism, food passage, and general well-being.

It quickly heals various wounds, including stomach and duodenal ulcers, bedsores, trophic ulcers, burns. This water softens the skin, gradually smoothes wrinkles, eliminates dandruff, makes hair silky, etc.

Withered flowers and green vegetables quickly come to life in "living" water and are stored for a long time, and the seeds, after soaking in this water, germinate faster, more amicably, and when watered, they grow better and give a greater yield.

"DEAD" WATER(anolyte, acid water, bactericide) - a colorless liquid with an acid odor, sour, astringent. Its pH = 2.5-3.5. It retains its properties for 1-2 weeks when stored in closed containers.

"Dead" water is an excellent bactericide, disinfectant. She can rinse her nose, mouth, throat with colds, during flu epidemics, after visiting infectious patients, clinics, crowded places. It can disinfect bandages, underwear, various containers, furniture, even rooms and soil.

This water reduces blood pressure, calms the nerves, improves sleep, reduces pain in the joints of the arms and legs, has a dissolving effect, destroys the fungus, cures a runny nose very quickly, and so on. It is useful to rinse your mouth with it after eating - the gums will not bleed, the stones will gradually dissolve.

And now about the parameters that will confirm that you received exactly “living” water or “dead” water and how to control them? Yes, even at home?

I am not going to conduct a general analysis (list the main criteria and norms) of drinking water quality indicators according to data from organizations such as the World Health Organization (WHO), the European Union, the State Committee for Sanitary and Epidemiological Supervision Russian Federation, State Sanitary and Epidemiological Service of Ukraine. This is a separate and large work, however, based on the publications and information known to me, I chose three "home" indicators of drinking water, both "live" and "dead", namely:

1. Hydrogen th p indicator (pH) is one of the most important indicators drinking water quality.Depending on fromChanges in the pH level of water change the rate of biological reactions, the toxicity of pollutants, the degree of corrosionwater aggressiveness, etc. For drinking water, according to WHO, the optimal pH ranges from 6.5 - 8.5 units. I control this indicator with such a portable pH device - a meter (pH-025 brand) with mandatory calibration in a special reference solution.

2. Total mineralization (OM)- general quantitative indicator(contents of various minerals and salts in drinking water. WHO, as the upper limit, has set an indicator in 1000 m G/
l, given that the indicator of total mineralization always fluctuates depending on the characteristics of drinking water sources. I control this indicator with such a portable “salt meter” device (COM 100 brand) with mandatory calibration in a special reference solution.

3. redox potential drinking water(Eh). By the way, our laboratories of Sanepidnadzor do not make this analysis, even when monitoring the quality of drinking water at water intakes and distribution networks in settlements. There is a preconceived notion that it is not required. It is not included in the GSanPiN 2.2.4-171-10 (GSanPiN 2.2.4-400-10) “Hygienic requirements for drinking water intended for human consumption” and other SES documents. Which is very bad. Whereas the World Health Organization (WHO) recommends drinking water with ORP no higher+50mv. In Ukraine, this condition is not observed anywhere, and the ORP (Eh) parameter is not controlled anywhere. Well-known biochemists suggest drinking water with ORP in the interval from plus 100 to minus 150mv.

I control this indicator with such a portable device "OVPmeter" (brand ORP-169E ) with mandatory calibration in a special reference solution.

ORP redox potential (Eh or redox potential) is a measure of the chemical activity of elements or their compounds in reversible chemical processes associated with a change in the charge of ions in solutions. Such processes are called oxidation-reduction reactions and are due to the release of electrons by one substance and their receipt by others. ORP (Eh) values ​​are expressed in volts (millivolts) with a positive (+) or negative (-) value. A bit complicated, but... read on!

(Website "About Water" Mosin.O.V., Ph.D.) "And now the most important thing ... ORP, like pH, is the most important characteristic internal environment the human body, because it is directly connected with the processes of vital activity and metabolism. The norm of the internal environment of the human body is considered ORP from -100 to +200mv. The internal environment of the body is in a slightly oxidized and reducing environment. But the ORP of ordinary drinking water, which flows in an apartment from a tap, is very often in the range from +170 to +350mv. These differences in the ORP of the human body and drinking water are often very different. ORP of water close to the body's ORP is considered optimal..In this case, the electrical energy of the body's cell membranes is not wasted on correcting the activity of water electrons. Water is absorbed by the body almost immediately, since it has biological compatibility with the body in this parameter. The energy of cell membranes is the energy of the highest level, which is the end product of the biochemical chain of nutrient transformation.”

Water with ORP from +50mv to -100mv due to its reducing properties, it normalizes the redox balance in the body, thereby:

normalizes the microflora of the gastrointestinal tract by stimulating the growth of its own normal microflora (bifidobacteria and lactobacilli) and suppressing pathogenic and opportunistic microflora, including Staphylococcus aureus, Salmonella, Shigella (dysentery), Aspergillus, Listeria, Clostridium, Pseudomonas aeruginosa, Helicobacter pylori (which is considered the main cause of peptic ulcers);

suppresses candidiasis (thrush) in the gastrointestinal tract and mucous membranes;

restores and activates the immune system in people with a weakened immune system and after immunosuppressive therapy, including after exposure to radiation and chemotherapy;

has powerful antioxidant properties;

has antimutagenic properties;

restores the detoxifying function of the liver;

has hepatoprotective properties;

has wound healing and anti-inflammatory properties;

has high antiviral and virucidal properties against hepatitis C virus, genital herpes and herpes simplex virus type 1 (better known as "cold on the lips");

has antiviral and virucidal properties against influenza A virus - the most common influenza among humans.

According to Russian and foreign scientific publications, in addition to the above properties, water with a negative redox potential:

helps to eliminate infectious and inflammatory manifestations of prostatitis;

stimulates the processes of growth, physiological and reparative regeneration;

has an antispasmodic effect in renal colic;

has antiseptic, diuretic (diuretic) action;

affects the regulation of growth processes and activity of cells of all types of tissues;

is a biostimulant for the restoration of hepatic tissue;

normalizes metabolism;

causes a general anabolic effect;

is a general tonic for overwork, asthenic conditions and for debilitated patients;

helps to reduce swelling and reduce arterial hypertension, reduces the intensity of allergic reactions and dermatosis, reduces osteoarticular pain;

is a means of preventing cancer;

reduces the patient's need diabetes in insulin;

increases the activity of tissue respiration enzymes;

reduces the risk of coronary heart disease.

Does everyone understand the purpose of "LIVING" water?

Then make it and drink to your health!!!

“Maybe sprinkle it first with dead water, and then with living water, huh ???”

We all grew up with fairy tales, but even now, as adults, many of us want fairy tales to become reality. And it turns out that in some cases such a development of events is quite possible, for example, when we are talking about living and dead water. Long-term studies have shown that such a liquid really exists and it is not so difficult to create it. You just need to stock up on a special device that performs electrolysis. Let's try to talk about how to make living and dead water at home?

The main features of dead and living water

So, dead water is an anolyte, a solution that is obtained with the help of an anode as a result of electrolysis. Such a liquid is characterized by an increased acid content, the presence of disinfecting, bactericidal, antifungal, antibacterial, antihistamine and anti-inflammatory qualities. Suitable mainly for topical use.

Living water is also called a catholyte, its solution is obtained using a cathode in the same electrolysis. This liquid is alkaline, it remarkably activates the immune system, improves the general condition, plays the role of the strongest antioxidant, normalizes arterial pressure, improves metabolic processes, etc. It can be used for systematic internal consumption.

How to make at home living water and dead?

Today on the market you can find several devices for creating living and dead water of domestic and foreign production.

Silver-activator Iva-2Silver

This device is made in Russia. Manufacturers claim that it has a number of advantages, namely the presence of a silver rod the highest standard. This device allows not only to activate ordinary tap water, creating anolyte and catholyte from it, but also to produce high-quality silver water suitable for drinking. In addition, the Iva-2Silver device is made using a special Aquatension System proprietary technology that allows you to increase the digestibility of water by an order of magnitude by changing it surface tension. Also due to the presence of a new electrode protection, the service life of the device has increased by an order of magnitude (compared to the previous model Iva-1). Iva-2Silver also has a built-in timer that will help readers of Popular about Health get activated water even easier.

A significant disadvantage of this device is its cost, which starts from 5,000 rubles. However, if you wish, you can purchase a more budget device Iva-1, which does not produce silver water, but can make living water and dead water. The cost of Willow-1 is approximately 4,000 rubles.

Melesta

This is perhaps the most budgetary water activator, which is manufactured in Belarus. Manufacturers claim that its use allows you to get living and dead water quite quickly and High Quality. But such a device has a number of disadvantages.

Firstly, dead water in such a device is formed in a fabric glass, which plays the role of a diaphragm. Secondly, this device has only two electrodes, which are made of food grade steel. In addition, Melesta looks rather clumsy, although the appearance does not affect the functions. There is a significant drawback - the lack of a timer.
Although at a cost such a device wins a lot - it will cost you about 1200 rubles.

Apparatus AP-1

This is one of the most popular water activators manufactured in Belarus. Such a product is characterized by a high level of quality, the manufacturer claims that it is made from top-class food grade plastic. The electrodes of the device are made of especially durable favorable metals, and the ceramic glass is made of a high grade of clay. The AP-1 device is distinguished by its attractive appearance, it allows you to get about one and a half liters of water in just twenty to thirty minutes. Such a device consumes little electricity - like a forty-watt light bulb. Another plus of the AP-1 apparatus is that its anodes are made of titanium, and their surface is coated with a platinum group metal. As for the cathodes, they are made of stainless steel.
However, the cost of such a device is quite high - about three thousand rubles.

This device is mainly popular among professionals, it is used for sanatoriums, rest houses and medical institutions.

However, PTV can be used at home as well. Such a device is characterized by high quality, compliance with all electrical safety requirements, and a certificate of conformity. There is no lead in the device itself, the electrodes are made of high quality materials (food grade stainless steel and titanium). With the help of the PTV device, you can literally get one liter and four hundred milliliters of activated water in twenty-five to thirty minutes.

One of the main disadvantages of the product is a rather high cost - about 5,000 rubles.

Do it yourself

Many craftsmen are trying to create a water activator on your own. To do this, you need to use a pair of stainless steel mugs, several syringes, a wire (cord with a plug), as well as one diode.

Drill a hole in one of the mugs, screw a diode into it (6A under a load of 220W). Fix both mugs on a stand made of non-conductive material. Glue better. Connect the U-shaped tube from two syringes by cutting their tops.

IN upper part of this design, insert another syringe (in the middle of the "P"). Fill the mugs with water, place them on the base. Lower the construction of syringes into them so that one edge of the letter “P” falls into one mug, and the second into another.