Metal-plastic crafts. DIY crafts from propylene pipes: homemade options for home

Do you have leftover plastic pipes after installing your plumbing system and are now taking up space in your closet or garage? Agree, it would be nice to make something useful out of them for the home. But you don't know where to best apply them and what good can come out of them?

We will give you a solution - the article provides ideas useful devices for home. Moreover, make original and useful crafts made of poly propylene pipes It’s not at all difficult to do it yourself. It is enough to take the remains of pipes and use ready-made ideas, or show a little imagination and create a unique product.

The article discusses the basic tools and materials needed for work, provides photo illustrations of useful and simple interesting homemade products. As well as video recommendations for making products from propylene.

If you don’t know what you can do with your own hands from ordinary plastic pipes and what materials you will need for this, we suggest you look at the photo selection interesting ideas various homemade devices for home, cottage, apartment.

Group #1 - functional crafts

Various products made from propylene can become an essential part of the interior or even its highlight. The main thing in this matter is to show imagination and approach the creation process creatively.

When making homemade goods needed on the farm, it is not necessary to leave real color pipes - it can always be repainted and supplemented with other materials.

As a result of such manipulations, the product will acquire noble look, and no one will even suspect a banal pipe in a pretty little thing.

Image gallery

Pipes are impeccable not only for their intended purpose, but also as a basis for making all kinds of crafts. The versatility of the material is associated with lightness, strength and significant service life. In addition to these qualities, one cannot fail to note the safety of using plastic pipes and ease of care.

Best for crafts polymer pipes made of PVC, characterized by better connecting properties - they are easily disassembled, unlike polypropylene pipes.

Pipe connection qualities

The service life of pipe products, as well as the performance characteristics of use, depend on the connecting qualities of pipe scraps. Let's talk in more detail about ways to connect material for household items.

Pipe connection options

1. Connecting two pipes using sockets. We first clean the pipes inside and out, treat them with lubricant, and then insert one part into the expanded part of another part. This assembly method is very convenient for country houses.
2. Gluing parts with glue. This option is more reliable, but will require a lot of time. First, the connecting parts are treated with sandpaper and degreased, and only then glue is applied to the outside of one pipe and inside the socket of the other. At the very end, we connect the pipes, twist the inserted pipe a little, and then squeeze them for a minute to secure them well. We carry out all manipulations with parts very quickly. And we leave our design until the glue dries.
3. We connect several blanks with using bolts, pre-drilled holes. This option is the most difficult, but ensures the durability of the structure.

Now let’s look at the most popular crafts that will not leave anyone indifferent.

Interior decorations for every taste

Organizers

Those who are beginning to understand the basics of homemade art can easily and simply make original stands for stationery from pipes of different diameters. Manufacturing is possible by attaching it to a table (wall), having previously cut each part at an angle. For a portable option, the trimmings are glued together. If you wish, paint the finished coasters in your favorite color.

The resulting stand for pens and pencils will perfectly decorate the table and create order and comfort on the desk.

Bookshelves

Designs that act as shelves for books will highlight the refined taste of the apartment owner.

Frames for mirrors or photographs

A photo or mirror frame decorated with short sections of pipes of different widths will add a special touch to the apartment. To do this, we lay out rings in an intricate pattern on cardboard and glue them together.

Shoe shelf

An interesting way to store shoes - shelves made of large quantity homemade wide pipes. To manufacture the product, it is necessary to glue the parts together or fasten them with self-tapping screws. We attach the finished shoe rack to the plywood, and then fix it on the wall.

Flower stands and pots

Flower pots on stands made of PVC pipes will look cute. Such a strong stand will create a living corner in the apartment.

.

From small segments sewer pipes you can make flower pots. If you decorate them with paper, stickers or paper, it will be design know-how.

Decorative vase

You can decorate the interior of your apartment in an original way using long pipes by turning them into fashionable vases for dried or artificial flowers. This craft can be presented as a souvenir for some important holiday.

If you use your imagination, then with the help of segments you will create many useful things: hangers, a trash can and much more.

Transforming pipes into elements for children's games

You can make a variety of crafts for games from pipes. This could be a playpen, swing, sled, big house for fun, football goals, outdoor showers and other crafts.

From this material you will get a comfortable swing that children will absolutely love. They are very practical, as you can ride them almost immediately after the rain.

In winter, children will appreciate sleds made from cylinders of different lengths for their quality, reliability in use and speed. To understand such a complex design, you need to carefully study a huge amount of information and educational video lessons on the Internet.

On hot summer days, children will happily run with the ball along the street and kick it into the football goal. A fairytale house will help make the dreams of little princesses come true. Its frame is made very quickly from pipes, and then the walls and roof are covered with colorful fabric.

And what a pleasure the little robber will experience when he refreshes himself under a summer outdoor shower, made with his own hands. Adults will also like this product.

For home theater lovers, you can assemble a screen for theatrical performances from three frames, neatly connected to each other and decorated with curtains. Little actors will enthusiastically perform performances that are useful for unleashing their creative potential.

Furniture items are an unusual saving option

Pipes can be used to produce furniture that is distinguished by its durability. Thanks to bold decisions, you can significantly save your family budget. Let's talk about the most popular types of furniture.

Chairs. Perhaps these are the most necessary pieces of furniture in the apartment. You can make chairs from the material: folding chairs, stools, armchairs and children's high chairs.

Double-decker children's bed. An excellent solution for those who want to keep money in the family and not buy an expensive crib. In addition, when children grow out of it, you can disassemble the bed and make other necessary products.

A small table with glass cover is an elegant solution for those who love coziness and comfort.

Rack. The design of many shelves will fit into any room and accommodate a lot of household utensils.

Country and suburban structures

You can also use excess building material on summer cottage. Plastic structures– an economical and successful option for lovers of comfort and convenience for little money.

Decorative arch for weaving plants from arcs that are bent under high temperature using a burner or hot water. You can make an open garage for your car using tarpaulin and PVC pipes.

Connoisseurs of relaxation will appreciate a chaise longue and a gazebo made of a special material attached to curved thin plastic rods sunk into the soil. And motorists will be happy to hide their vehicles from bad weather using a canopy stretched over plastic pipes.

The list of products made from this material is huge - bird feeders, greenhouses, containers for plants and much more. You can even fence off the area with pipes, making a nice fence that does not need to be painted every year.

Products made from plastic pipes are very practical to use and are quite easy to manufacture due to their qualities (flexibility, availability of parts for connection, easy to cut). Thanks to their imagination, perseverance, and diligence, amateurs beautiful crafts will be able to bring any idea to life.

You can use water pipes in the most different ways. Today's review has collected just such “non-standard” methods. Each of them deserves special attention, and therefore enjoy your viewing.

1. Skittles

2. Ribbon organizer

3. Wreath

4. Canopy

5. Dryer

6. Tool stands

7. Garden furniture

8. Floor lamp

9. Vase

10. Furniture set

11. Flower pot

12. Wine rack

13. Laundry basket

14. House

15. Garage

What can be made from plastic pipes

Most people immediately have a question: “is it possible to replace PVC pipes with polypropylene pipes?” . Can be used polypropylene pipes, only in this case we still need a soldering iron.

Advantages of PVC pipes:
- snow-white color;
- you can connect pipes with fittings using glue, or without it at all;
- if you do not use glue, the structure will be collapsible, and like a LEGO constructor, you can use fittings and pipes to assemble other structures.
Of course, polypropylene pipes do not have these advantages.

Now, let's see what crafts you can make from plastic pipes with your own hands:

From plastic pipes you can make:

Children's high chair made of 1″ pipe

Camping folding chair made of 1″ pipe

Country tables and chairs made of 1″ pipe, for outdoor use

Greenhouses, greenhouses and light frames on beds for covering plants, assembled from polypropylene pipes and connecting elements- a very budget option that combines low cost and ease of assembly. If necessary, they can also be easily dismantled.

Strong and stable racks for growing and working with seedlings.

PVC pipes of larger diameter, carefully cut out from above with a jigsaw and filled with soil - compact and aesthetic option for planting greenery.

Children's room 2 bunk bed(pipes with diameters of 3/4″, 1″ and 1 1/4″ were used)

A bed for dogs, the diameter of the pipe in this case is selected based on the size and weight of the dog.

Hanging swing for a summer house

Sleigh for housework in winter at the dacha

From the remainder of large diameter pipes, you can make a small organizer in the garage

Clothes dryer made of PVC pipes.

By attaching the wheels, we get very convenient carts.

A greenhouse made of PVC pipes will serve you long years, it does not need to be painted, and it will not rot or rust, as usually happens with greenhouses made of wood and metal.

You can assemble hydroponics from plastic pipes, but in this case I would like to note that you can use any pipes (including sewer pipes)

Children's car made of plastic pipes

Or make a pen for chickens

Shelving that can be easily assembled to any size

Collapsible outdoor tents and tents made of plastic pipes

A trellis for grapes made of plastic pipes that will always have a pleasant appearance.

Carports made of plastic pipes

Fences and enclosures made of plastic pipes

PVC pipes are an easily accessible material for useful ideas and devices on the farm. What will you need for this? Hacksaw, tape measure, glue, in some cases sandpaper.

1. Rack for drying clothes.

2. Drinking system in the chicken coop.

3. Greenhouse.

4. Shelving.

5. Bicycle rack.

6. Rack for containers with vegetables.

7. Summer velomobile.

8. Various tool holders.

10. For storing shoes.

11. Summer shower for children.

Not complex designs garden furniture assembled from polypropylene pipes will help you relax and unwind in a shady corner of the garden.

For example, how do you like comfortable chair models?

A comfortable sun lounger, an impromptu canopy for a morning meal in the fresh air, or this model of a stand in the spirit of a “life hack” that allows you to train on a treadmill without leaving the Internet? Cheap, reliable and practical!

Children in the country are a separate topical issue. The ubiquitous children must be given the opportunity to play and misbehave in such conditions that parents can be calm.

For kids at the dacha you can put together such a comfortable playpen or a cozy one toy house. These designs can be easily transferred to the garden or veranda, and your child will always be in your field of vision.

Polypropylene pipes are made from polymers, that is, one of the types of plastics. Although the material is lightweight, it has a margin of strength. If pipes are used to transport hot liquids, their service life is on average 50 years. When working with cold filling, the service life increases to 100 years. Polypropylene pipes are used in water supply, sewerage, watering and irrigation systems, heating, and even for transporting flammable gases, to which plastic is chemically resistant. Polypropylene pipes are widely used for different types gaskets: external, on walls, internal. However, this material can be used not only for its intended purpose. The range of applications has increased significantly, due to creative crafts made from polypropylene pipes, which are now replete with the websites of handymen. Let's talk about what products for home and garden can be made from this durable, but relatively inexpensive material.

Advantages and properties of pipes

Polypropylene has the lowest density of all plastics. However, this property cannot be considered a disadvantage, since its indicators are sufficient for working with liquids and gases. The material is characterized by low moisture absorption and the ability to work in extreme conditions(both at low and at high temperatures). Polypropylene has a low degree of flexibility, when again compared with other plastics. The material is characterized by high resistance to cracking, but only at constant temperatures. If sudden changes are observed, the likelihood of damage to the polypropylene pipe increases sharply.

The material has electrical insulation and resistance to a whole list of chemically active substances. Only some reagents are capable of destroying polypropylene, but only under certain conditions (temperature, humidity), which are difficult to recreate. This type of plastic boasts long service life, as mentioned above. However, if the maximum permissible operating temperature, the material begins to melt and ceases to withstand pressure. In this situation, the service life is rapidly decreasing. Just one temperature jump is enough. Of course, this rule is more suitable for pipelines. It is unlikely that crafts will be placed in extreme environments and subjected to similar tests.

Among other things, if you purchase polypropylene from a reliable manufacturer, you can guarantee its environmental friendliness. Crafts made from this type of plastic are not subject to corrosion, which has become a real scourge for metals, and are perfect for both home decoration and gardening. Due to the light weight of the pipes, the product is easy to move, and using the type of fastening with bolts, it is just as easy to dismantle and reassemble in a different form.

Polypropylene at spring cleaning Can be washed with ordinary soapy water. The rest of the time it is enough to wipe it damp cloth once a week, like any other surface.

Pipe connection methods

Pieces of polypropylene pipes are connected using diffusion welding. Although there are many methods for fastening two parts, others are not able to provide a reliable connection:

• Compression docking. The pipe is compressed, which over time will inevitably lead to deformation and leakage.
• Thread. Weak side techniques when using polypropylene pipes - mechanical strength connections.
• Press connection. Sometimes used for polypropylene pipes, but rubber compressor may change its position, which will lead to a violation of the tightness of the connection. Here we're talking about about external loads on the pipeline.

The only reliable option is heating polypropylene to a certain temperature by welding, followed by cooling and “sealing” the joint. Of course, this method is applicable to pipelines that are used to transport gases, chemically aggressive substances or water of different temperatures. In our case, we are talking about crafts. Pipes are not used for their intended purpose, so as an exception, you can use any other method or use glue and even bolts.
In a pipeline, as a rule, each fragment is tightly fastened, that is, with no expectation of subsequent disassembly. For connections, fittings are used - special parts that are used when assembling the pipeline and ensure hermetically sealed two fragments of the system. The same fittings are suitable for polypropylene pipes as for metal products. They are executed from various materials(brass, bronze, cast iron, brass, steel, polyvinyl chloride, polypropylene). Depending on the shape and purpose, fittings are classified into the following groups:

• Caps and plugs. Used to plug the end of a “blind” pipe.
• Fittings. Connect pipes with flexible bends (hoses).
• Crosses and tees (manifolds). As the name implies, they are used to branch one pipe into several streams.
• Adapters. Allows you to connect pipes of different diameters.
• Bends and corners. They are used for “turning” and changing the angle of inclination of the pipe.
• Couplings and barrels. Extend the pipes in a straight line. This type of fitting is the most commonly used. They allow you to locally replace a piece of pipeline without affecting the entire system.

Depending on the complexity of the craft, you will need one or another set of fittings. The shape of the future product must be thought out in advance in order to purchase suitable connecting parts.

For home/apartment

The range of products made from polypropylene pipes for the home is very extensive. The material can be used to make both compact desk organizers or shelves, stands, and large-sized furniture pieces. The material can be selected by color or the craft can be painted in your favorite shade after production. Polypropylene pipes, the surface of which is decorated with decorative painting, will look stylish and unusual. To cover the material with patterns or ornaments, you can use special stencils. From the variety of paints, it is better to choose ones that are resistant to humidity, for example, acrylic is suitable. Let's look at a number of master classes on how to create simple but necessary things in the house from polypropylene pipes with your own hands.

Organizer

Organizers were originally called notebooks for important daily notes. Now this word has acquired several new meanings. We are interested in a desktop or wall-mounted device for distributing writing instruments, that is, a product in which pens, scissors, paper clips, paper clips, sharpeners, buttons and other little things needed for work can be arranged into sections. Organizers are widely used not only in offices, but also in home workshops. For example, doing handicrafts also involves using a large number of small tools and parts, which it is advisable to put in their places. There are two types of organizers:

• Tabletop.
• Wall-mounted.

The former are used if there is enough space on the table to accommodate them. The latter are suitable for distributing large quantities small items. To make an organizer you will only need the tubes themselves, fasteners for connecting them into a single structure and any dense material, from which the bottom of each section is made. You can use plastic scraps. The tubes are cut into pieces of the required length. Then they are connected to each other on the sides and the bottom is glued to the structure. If the organizer will be attached to the wall, the upper edges of the pipes are usually cut at an angle for ease of use. In this case, instead of a bottom, a board or piece of plywood is used.

Some people make a wire organizer out of pipe. Holes are drilled in it through which they will enter the room. All the “ugliness” from the tangle of wires is hidden inside the pipe, thereby not affecting the aesthetics of the interior of the room.

Decorative frame or partition

Decorative frames and partitions made of polypropylene pipes are made according to the same principle. To work you will need:

• Adhesive composition.
• Directly the tubes themselves.

They need to be cut into numerous “rings”. You can also use a regular knife, since polypropylene is enough soft material, but it is better to purchase special scissors specifically for plastic. Other devices can distort the edges of the pipe with jagged edges. After the required number of rings is ready, their sides are connected to each other using glue. Fragments of different diameters will look original. In this case, the illusion of soap bubbles is created in 2D. The rings are used to form a photo frame or a room divider. By the way, such a screen will be a worthy competitor to designer products. It looks fresh, original, airy and incredibly aesthetically pleasing. To complement the zoning element of the room space, you can use decorative lighting that will harmoniously combine with the product white.

Shoe shelf

Shoe shelves made of polypropylene pipes are usually made in the form of a honeycomb. The material is cut into fragments of equal length. They are then connected to each other using glue. The shelf is formed from rows of scraps, where each subsequent fragment “lies” in the space between the two previous ones located below. Such a shelf can be given a wide variety of shapes. One of its main advantages is the versatility of the configuration. By adding or removing tube sections, you can choose the ideal shape for the hallway, which already has furniture, and where it is difficult to install a full-fledged shelf. Some craftsmen connect the shoe storage system with cabinets or hangers so that the design blends organically into the overall composition. For such shelves only large diameter pipes are suitable.

Before you start working, you need to try it on. It is enough to insert a pair of slippers or boots into the hollow part of the pipe. You can also make a shoe rack using boards as crossbars. In this case, the tubes will become side supports. They can be stylized as retro and painted with silver paint, and the surface of the fittings can be coated with a bronze composition.

Wine bottle rack and glass holder

A stand for wine bottles from polypropylene pipes can be made, like a shoe rack in the form of a “honeycomb”, but using fragments of a smaller diameter. They are also selected individually by trying on bottles. For the “tree” design, small diameter tubes are suitable. They are used to assemble a complex composition with a central “trunk” and side branches. A coupling fitting with a diameter suitable for the neck of the bottle is attached to the end of each. The glass containers are then inserted into these holders. The wine “tree” can be decorated in steampunk, retro, eco style. For minimalism, you can use one piece of pipe, in which holes for the necks are cut out on the side. The fragment is fixed to the wall using self-tapping screws (possibly at an angle) and bottles are also inserted into it with their necks down.

To make a hanging or wall-mounted glass holder, one piece of pipe is also enough. Along its entire length, an incision is made as wide as the diameter of the stem of the glass. Then the product is fixed on the wall or bar counter. The glasses are threaded through the cut with their stems. A wide bottom will not work glass containers fell. On such a rack it is convenient not only to store glasses, but also to dry them after washing.

Vases and flower pots

Large diameter polypropylene pipes can be used to make pots for large indoor plants. For the bottom it is better to use a denser type of plastic. For small green spaces, small-diameter tubes are suitable, which are grouped into a single composition. The top is cut at an angle and then painted green. The result is a structure that vaguely resembles a thicket of bamboo. A pot for ornamental grass, cereals or seedlings is made from pipes and plugs. The fragments are placed horizontally. In each, a piece is cut out in the middle or along the entire length, leaving only small “walls” on the sides. Then a plug is attached to the cut pipe, soil is poured in and plants are planted. Such pots are usually mounted on walls. This way they save space and don’t get in the way.

Furniture for the nursery and more

As mentioned above, full-fledged furniture can be made from polypropylene pipes. If you decorate it correctly, then such an item will not look like a homemade item for the garden that accidentally ended up in the house. The list of furniture items that can be made from pipes is quite impressive:

• Tables and coffee tables.
• Chairs and armchairs.
• Racks, shelves and cabinets for household items, shoes and clothes.
• Hangers and dryers.
• Children's beds (including bunk beds) and playpens for babies.

Shelves and stands

Let's consider the process of manufacturing storage systems using the example of a bookshelf. For such furniture, you can get by only with pipes or additionally use boards or cut pieces of MDF or chipboard. In this case, what matters is the content that will be placed on the shelf. Books, for example, can be laid out freely on an “empty” shelf without a crossbar if its width is less than the width of the publication. And the filling will not fall. Using the same principle, you can make shelves and holders for shoes, magazines, dishes, lids, bottles, cups, cutting boards, magazines, disks. This option is not suitable for those shelves on which the filling will be placed. different forms and sizes. Here you will have to use crossbars made of a different material, which will be secured to the “sides” made of tubes. They will look stylish and unusual corner shelves for books. To make them you will need pipes, plugs, bends and corners. The holder is assembled from fragments, arranging them in U-shaped zigzags. When the shelf is ready and secured, the books will be held on it by being supported by the pipe itself and the wall. The shelf is ideal for interiors decorated in loft style.

To make a coffee table you will need small diameter pipes, fittings and a table top. A glass lid will look stylish. The tube system will act as a support. They can be connected to each other according to a standard pattern, like four legs, or you can use your imagination and decorate the supporting part of the table with an intricacy of tubes, decorated with various fittings.

Clothes hanger and drying rack

Assembling a hanger or clothes dryer starts from the base. You will need four tubes for the legs. They are connected to each other using tee fittings. A crossbar tube is inserted into the side branch, which will increase the stability of the product, and two racks are inserted into the top branch. Plugs are put on the legs to prevent dust and dirt from getting inside. Additionally, the side posts can also be secured at the top with another crossbar, again using a tee fitting. “Hooks” are made from the same parts. The top rail is assembled entirely from T-fittings with plugs.

Rack for living room, hallway, pantry

In the racks, a base structure is made from polypropylene pipes, which is subsequently supplemented with wooden shelves. The resulting furniture will be uncluttered, relatively light, but at the same time durable and resistant to heavy weight loads. Since the material is insensitive to aggressive microclimates, it is universal. These racks can be used in the kitchen, bathroom, living room, hallway, nursery and pickle pantry. Since the loads on the furniture will be quite large, polypropylene pipes cannot be connected to each other using bolts or adhesives. In this case, it is better to resort to diffusion welding, which will ensure reliable connection of the fragments.

Playpen for children

A playpen for babies is necessary if the mother plans to do household chores when the child is nearby. This design will protect the little person, but will not limit his movements. The playpen is easy to make from polypropylene tubes. To work you will need:

• Tee and eight-angle fittings.
• Small diameter tubes.
• Scissors for cutting polypropylene.

The playpen is assembled very simply:

• First, the tubes are cut into fragments of the required length (small horizontal and long vertical “rods”).
• Then T-shaped fittings are put on each rod on both sides.
• On the sides, short tubes are inserted into the connecting parts, two on each side.
• Now T-shaped fittings are put on them again, which are connected to the next rod at the bottom and top.

Then the wall of twigs is “wrapped” 90 degrees using corners.

The bunk bed is assembled entirely from pipes and fittings. Directly itself sleeping area where the mattress will lie is strengthened with the help of short tubes, which are often placed from side to side. It is easy to make a neat ladder from the material. If the bed is for boys, then you can even attach a small horizontal bar to it for physical exercise in the morning. For one child, the bottom is equipped workplace. To do this, it is enough to assemble from tubes additional supports under the tabletop. If the baby is still very small, then the bed is decorated with high sides.

For a country house and garden

Plastic is a universal material, products from which can decorate not only the house, but also the surrounding area. For landscaping garden plot Light, mobile furniture, special stands for flowers and plants, greenhouses, feeders for pets, greenhouses, and pots for seedlings are needed. In the games and recreation area it is also necessary to install a couple of special structures: football goals, gazebos, pergolas and decorative arches. For lovers active rest required separate place for bicycle parking. Excellent replacement a full-fledged garage, for the construction of which there is no time or money, will become a summer carport that will protect the car from the rain. All this can be made from one material - polypropylene tubes. Let's talk about how exactly.

To make a football goal you will need tubes, mesh, fittings (corners, plugs, tees). Start work from the foundation. It will have a U-shape. First, the widest crossbar is assembled from three short fragments. They are secured with T-shaped parts. Then three fragments of the tube (two short sides and a wide middle) are connected to each other using corners. The same fittings are put on the ends of the “P”, but with branches pointing upward. Now they are making exactly the same design. It is connected to its “twin” through the branches of the corners, which were directed upward, and with the help of two crossbars inserted into T-shaped fittings. Finish the work by stretching the mesh.

Garden furniture made of plastic pipes

Chairs, sun loungers, tables, benches, and deck chairs are made from polypropylene tubes. It is better to choose a white material that can be easily combined with wood, metal and textiles of any shade. In addition, a neutral tone will make the furniture airy and add a touch of freshness. Sun loungers, sun loungers, chairs can be made according to two principles:

• Strengthen the seating area with frequently spaced cross tubes.
• Use tension fabric that will allow the seat to sag slightly.

In the first case, you will have to use special mattresses or pads to make sitting softer. Products that combine polypropylene with wood look great. Tables and low tables are assembled using the same technology as similar home furniture. The only difference is the material for the countertop. If the coffee table is glass lid will look appropriate in the house, then for the street it is better to use more durable and less easily soiled materials (plastic, wood, metal).

garden arch

Polypropylene tubes have sufficient plasticity so that they can be formed into a semicircular arch. The simplest example of the product consists of two rows of supports that smoothly flow into the upper crossbar, connected to each other by horizontal trimmings using T-shaped fittings. So that the arch covers most of the garden path, additional rows of supports are attached to it, as if stretching the structure lengthwise. The arch will be an excellent support for climbing roses, grapes, clematis, ivy and hops. Two years are enough for the branches to densely cover the tube structure, leaving only small gaps for sunlight. For more complex options designs use tubes of various lengths. Their intersections and connections decorate the walls of the arches.

For the gazebo, a frame base is made from polypropylene pipes. The design can be given a simple square or classic round shape. The roof is covered with polycarbonate, waterproof fabric or thin wooden slats. A patio does not require a roof, but on the sides the “walls” of gazebos are created from flowing curtains, which, if necessary, provide the necessary privacy. If the master has an impressive supply of polypropylene tubes and fittings (plugs, crosses, tees), then the side partitions can be made from them in the form of a fine grid (classic or at an angle of 90 degrees).

A carport is assembled according to the same principle as a gazebo. In more simple options the roof is made of waterproof material (as for tents) and is limited to this. If you have the time and money, the parking space can be covered with polycarbonate sheets on top and sides. This way the car will be protected from rain and wind, which will even allow you to work on car repairs in bad weather.

Bicycle parking spaces

A small parking lot for bicycles is assembled from polypropylene tubes of small diameter. First you need to form a lattice. The gaps necessary to accommodate a bicycle wheel are left between its rods. A T-shaped fitting is attached to each crossbar, with the help of which the stand-holder will be secured in the future. It is assembled from short pieces of pipes and similar connecting parts. Subsequently, one end of short tubes are threaded into them, the other ends of which are secured to the “grid”. As a result, the two planes will intersect at right angles, and the entire structure will stand firmly on the ground.

A greenhouse is the most simplified design, covered with a film, which is intended for growing seedlings. They are used only in early spring when the temperature environment haven't risen to yet required values, and growing weak shoots outside without special barriers is too dangerous. Greenhouses are considered temporary structures. Unlike greenhouses, they do not have windows or doors. To build a small greenhouse, all you need is a set of pipes for the base, semicircular crossbars, T-fittings and corners. The structure is assembled from several “arches”, on which a transparent film will subsequently be attached using special plastic clothespins. You can enter the greenhouse only by removing the protective sheet.

Greenhouse and greenhouse made of plastic pipes

A greenhouse made of polypropylene tubes is a more “serious” and bulky structure than a primitive greenhouse. As a rule, special soil is brought into it and arranged raised beds, the walls are equipped with windows that open when ventilation is necessary; there is a full door that closes with a latch. Since the structure is more monumental, it is usually covered not with a thin film, but with polycarbonate sheets, which are fixed to a “skeleton” of polypropylene tubes. The shape of the greenhouse can be either a classic semicircular or square or rectangular. The structure is assembled according to the principle of assembling gazebos. Inside it is usually equipped with special shelves made from the same tubes, which will later play the role of stands for long pots with seedlings and further strengthen the structure.

Some craftsmen make complex structures in which static segments alternate with mobile ones. The latter are equipped with special handles and rise up to ventilate the greenhouse. There is no need for windows for such a structure.

Containers for seedlings

To make containers for seedlings, you will need pipe cuttings, plugs and plastic scissors. First, two longitudinal and two transverse cuts are made in each fragment. The resulting polypropylene rectangle is removed from the tube. The sides of the fragment are covered with plugs. The pipe is placed horizontally. Fill it with soil and plant the plants. For such pots a “stepladder-stand” is made. Its “steps” are connected to each other by additional crossbars, on which tubes with seedlings are placed in a row.

Chicken feeder

Feeders for chickens from tubes can be built in two ways:

• Make it simple horizontal design with several sections, like pots with seedlings.
• Make a vertical feeder from several pipes. She takes less space, but stores a lot of food.

The second structure is fixed to the wall using brackets at such a height that the chickens can freely reach the grain. The feeder is equipped with a lid on top that will protect the feed supplies from dust and moisture. The height of the pipe is selected individually according to the height of the person who will fill the grain (approximately at the level of his chest).

You can make an unusual wall-mounted tree from polypropylene pipes if you don’t have an artificial prefabricated beauty at hand, and the chimes are about to strike midnight. A tree is assembled from “rings” into which tubes are cut. They are connected to each other, giving the shape of a Christmas tree. It is better to use tubes of different diameters. Each ring is painted a specific shade. To add a festive touch to the craft, it is additionally covered with glitter. In each “ring” they put New Year's toy. Some can be filled with miniature gifts. By the way, this way it’s easy to “hide” gifts from children and turn their search into an exciting game. New Year's wreath on front door also collected from “rings”. To make the decoration catch the eye of passers-by and guests, it is designed according to the principle of contrasts. For example, they use only white rings, into which they selectively put bright ones. New Year's balls and toys within one or two shades.

Play complex for cats

A play complex for cats is assembled from tubes and plastic bars. After making the structure, each part is covered with thick fabric or rigid cord, which will later be used as a scratching post. The complexity of the design depends on the patience of the owners and the activity of the pet. You can build a simple house with a horizontal ladder, a lounger and hanging toys. Some don’t stop there and assemble real cat palaces with “hammocks”, a complex system of transitions, “booths” and wheels for running, like hamsters in cages.

As has already become clear, polypropylene pipes have so many applications that it is even difficult to squeeze a list of them into the framework of one article. This material is somewhat reminiscent of a construction set: the craftsman has a set of parts that can be fastened together using connecting elements as your heart desires. Therefore, from the tubes it is easy to obtain both simple design, whose laconicism borders on primitivism, and a complex composition with ornate interweaving of individual fragments.