DIY small computer table. There are no suitable options in the store? Let's make a computer desk with drawers with our own hands

Now almost every person has a tablet or personal computer. And if you can work with the first two devices even while lying on the couch, then this will not work with a PC. Therefore, for the convenience and health of users, it is recommended to work or play on a computer while sitting at a specially equipped table. Today's HouseChief editorial review is dedicated to how to make a computer desk with your own hands.

Read in the article

Design features of computer desks

Recommendation! Mark the halves of the guides and install them on the sides while the cabinet is not yet assembled. Believe me, it will be much simpler and easier. To install the guides, use a special template, of which there are many on the Internet.

How to make a computer gaming table with your own hands

Computers are used for more than just work, and most users buy happy, powerful machines specifically for gaming. A regular computer desk is not suitable for gamers because it requires a lot of space for multiple monitors, speaker system, MFPs, keyboards and game consoles. A gaming table can be purchased in a store or made by yourself.

Drawings and assembly diagram of a computer desk

A gaming desk is practically no different from a traditional PC design. The difference lies in the larger tabletop area, since you need to place at least 2-3 monitors, office equipment and game consoles. Also, instead of drawers for papers and office supplies, powerful speakers are installed in the cabinets. Gaming tables, like designs for regular work PCs, can be rectilinear, corner or cantilever.

Before assembling a computer desk for gamers, you need to carefully think through everything: how many monitors will be installed, what office equipment will be used, your preferences and capabilities. It is also necessary to provide a cable channel, since with this large quantities There will be a lot of wires for different equipment and it is undesirable for them to dangle each on their own.

Assembling a table for a gaming computer with your own tables

Making a gaming computer desk is no different from previous options, with the exception of a few nuances related to the design features. Watch the video tutorial on how to make a plywood corner desk for your gaming PC

Review of prices for computer desks

Modern manufacturers offer a fairly large assortment of computer tables, both for work and play. We suggest you familiarize yourself with the prices of the most popular models. The cost of tables depends on the materials, design, brand and region of sale.

It is no longer easy to imagine our life without a computer. Although some people prefer laptops and all-in-one PCs for their compactness and portability, the traditional desktop computer is still the most convenient solution. But equipment of this kind should be placed in a place specially equipped for this, but often buyers do not quite understand how to assemble a computer desk, and whether it is worth doing it themselves.

Before assembly

Before directly placing homemade or purchased furniture, you need to decide exactly where it will be located. This is an extremely important step, because the location of the equipment must meet all safety rules and proper operation.

The basic rules are:

• Availability of outlets nearby and the ability to easily connect devices.
• It is better to position the structure so that it does not take up much space in the room.
• To avoid vision problems, the room with the computer should be well lit with natural light.
• The wall to which the computer table will be placed must be level and there should be no paintings or other decorations hanging on it.
• Do not place equipment near heaters or radiators, otherwise the devices may overheat.

By following these rules, you can eliminate most problems that may arise when working on a personal computer in the future.

Assembling a computer desk according to instructions

Ordering a ready-made table without assembly and delivery will save a significant amount, and the process itself, although it requires accuracy and painstakingness, is quite simple. Even if difficulties arise with the table assembly diagram or during the process, you can always contact the support center of the store that sold the product.

Before assembly, check that each necessary part and the diagram itself are present. The fastest and easiest way to assemble a cabinet, and the most difficult stage is the installation of moving parts, so it is recommended to start with a cabinet.

Carefully fasten the supporting components to the tabletop so that finished design didn't stagger.

Sequencing

Unpack each bag and distribute the parts. Put the small ones in some tray or box, arrange the individual modules: legs, table top, etc. The tabletop, as a rule, will be assembled at the very end according to the instructions.

Prepare a screwdriver and 2 screwdrivers (flat and Phillips). According to the diagram, place the parts required according to the instructions on the floor inside up, put metal fastenings so that the holes match, and connect them with mounting screws and plugs. Each part is connected exactly according to the instructions for assembling this table.

Under the work surface, install the guides for the pull-out shelf under the keyboard, in the places indicated for this purpose, horizontally and parallel to the floor. Make sure the shelf fits in smoothly and without interference, and secure the guides with a screwdriver. Install the plugs and insert the shelf with casters.

Check all connected parts according to the instructions; the structure itself must be tightly secured and not loose. You can install and connect your computer.

This algorithm is applicable to almost any type of furniture. Even such a difficult process as assembling a transforming table will not be unnecessarily complicated if you arrange the parts in the order of the diagram and carefully read the instructions.

Making a computer desk yourself

Design

Sometimes assembling a computer desk with your own hands can be a cheaper way than purchasing or assembly costs. But in this case, you will have to think through the design, material, color, make instructions, drawings, diagrams and details yourself.

The first step in manufacturing is designing and drawing up a plan for your structure. As a rule, this is done using chipboard. It should be remembered that this approach will require much more attention and caution than connecting ready-made parts according to pre-written instructions.

The main parameters by which you can design a computer table:

• Type: corner or straight, rectangular, modular, multi-seat, stand-up table or transformable table;
• Length: for extension and tabletop (user space) 60-70 cm is recommended, for corner options this parameter will be no more than 60 cm, since the turning space, space for the system unit, for the cabinet (30-40 cm) are taken into account
• Depth: 60-70 cm (including the extension) or 45 cm (without it), for corner model 85 cm;
• Height: depends on the height of the user, the average value is 75 cm. There is a formula for calculation optimal height: height * 75: 175. For a child, it is recommended to include a seat height adjustment system in the plan.
• Cabinet planning

It is also possible to find already ready-made options, diagrams, drawings, instructions and photos of assembling any table on the Internet. This can simplify the design a little and speed up its production.

Parts preparation and assembly

When already selected final version, all parameters suit the user and are well thought out, it’s time to turn the idea into reality. In order to assemble a computer table according to the diagram, you will need:

• Material: furniture sheet of the right size, it is allowed to use MDF boards, plywood or chipboard;
• Machine, hacksaw, chisel;
• Sandpaper;
• Any varnish for coating;
• Self-tapping screws, mounting screws, drawer handles, pull-out shelf rollers and other pre-designed parts.
• Pencil, tape measure, square;
• Screwdriver and drill with drill bits.

Once all the tools are ready for use, you can start cutting:

First of all, you need to cut out the tabletop, sides, top and bottom of the cabinet. Take the dimensions exactly as indicated on the drawing.

Cut off the corners of the vertical panels; the back corners can be left as is as they will face the wall. Using sandpaper, round off all cut irregularities and sand sharp corners.

Cut out a shelf for the keyboard and a stand on which the system unit will be located. If the drawing calls for additional shelves, cut them out as well. Round the front corners and cut out a small area near the bottom back corner for the baseboard so that the shelves and stands sit flush against the wall.

Using a drill, make holes in the places marked in advance (with a pencil). Check that the holes will line up perfectly.

If a cabinet is provided, then cut out all the remaining walls and drawers, make pencil marks where the drawer guides should be located, and attach them with mounting screws. Connect the false panel to the bottom part, and then to the cabinet walls themselves. Assemble the box, not forgetting the back wall and drawers, and check the movement of the drawers along the guides.

An extension is made in a similar way, if it is provided for according to the plan. To do this, use a drill to cut holes in the tabletop and on the vertical walls of the structure, where they will be attached to the tabletop. Take a square and install the sides so that they are perpendicular to the plane of the table, and secure them.

Screw the screws into bottom side countertops, you may need to find someone to help hold the panels. All other walls, parallel to the floor plane, are attached in the same way as the side strips. The main thing is to check their location relative to the floor using a level.

The assembled table must be completely disassembled. Mark the parts in advance so that you can immediately understand what is attached to what. Sand every detail of the structure and varnish to ensure smoothness and long term services of your design.

Connect the modules together according to the diagram and check the structure for instability.

If the table stands firmly and does not tilt from side to side when working, then it is ready for use. You can safely place it in a pre-designated place and connect the equipment.

The quality and durability of the structure depend on the accuracy of installation and cutting of parts, as well as on the quality of the fasteners themselves. By choosing each component of your table model yourself, you can prevent breakage and other inconveniences that may arise in the future.

Thus, in addition to purchasing already finished table, you can save quite a lot of money by assembling a computer desk with your own hands. But this method will require extreme accuracy, painstakingness and more time than assembling ready-made parts.

A homemade table can look exactly the way the user personally wants it, the main thing is to use the tools correctly and pay more attention to assembling and sanding the wooden panels.

Photo of the table assembly process

Computer desk refers to specialized multifunctional furniture that combines desk, space for placing a PC, storing documents and office supplies, convenient placement of peripherals and lighting fixtures. Today manufacturers offer the widest range models that meet all consumer requirements. However, industrial designs have one common drawback - unreasonably high cost. In this publication we will tell you in detail how to make a modern corner computer desk with your own hands, we will look at the drawings, dimensions and popular assembly diagrams for this functional piece of furniture.

For self-creation suitable model Suitable for almost any slab Construction Materials, possessing sufficient strength and decorative qualities. Among the most popular are:

• laminated chipboard;
• Plywood;
• Natural wood.

Some models are assembled from a combination of materials. For example, fake diamond or strained glass can be used to create the top of a computer desk made from steel frame or metal support elements.

Size calculation

Depending on your capabilities and needs, you can make a straight, corner or combined computer desk.

The size and shape of the product depend on many factors:

• Tabletop dimensions;
• Selecting the location and configuration of the product (straight, angular);
• Functional features (dedicated space for installing a system unit, printer, lighting fixtures, distance between supporting elements, etc.).

As practice has shown, most home craftsmen have a particular difficulty when designing a corner table for a PC. Let's look at the calculation rules in more detail.

Corner table design: product and installation features

Before you draw a drawing, you need to decide on the design of the computer desk. In the classic version, such a product consists of three modules:

1. Support box, which additionally serves as a dedicated space for the system unit;
2. Cabinet with door or drawers. This item“part-time” is the second supporting element;
3. Corner tabletop.

The computer desk assembly diagram is distinguished by its simplicity:

1. Support blocks are placed along the edges of the structure.
2. The tabletop serves as the fixing element of the modules, which is installed on the supporting elements using dowels or furniture ties (ruffixes, eccentrics).
3. To add additional rigidity, a leg made of strips of chipboard or metal is attached to the corner of the tabletop.

Settlement rules

Before you do corner table for a computer with your own hands, you need to draw up a drawing with details and dimensions of all components. Dimensions are calculated as follows:

• The length of the wing and the depth of the table top required for comfortable operation are determined;
• The width of the supporting structure is calculated, which will act as space for the system unit;
• The dimensions of the cabinet are calculated taking into account the depth of the tabletop and the required working space for the operator.

Important! For convenient use and assembly of the corner model, it is necessary to provide indentations from the edge of the tabletop to the supporting elements.

Optimal table size

In production use optimal sizes this model. Standard sizes computer desk assume the following module dimensions:

• Table top (L 1 wing * L 2 wing * W) – 1344 * 1544 * 600 mm.
• Support box with space for a computer (L * W * H) – 510 * 250 * 734 mm.
• Support stand (L * W * H) – 510 * 450 * 734 mm.

Important! In this embodiment, the distance from the edge of the cover to the installation site of the support modules is taken into account - 70 mm. The thickness of the chipboard is 16 mm. The total height of the product is 750 mm.

Minimum size

When determining the minimum dimensions of the structure, it is necessary to reduce the depth of the tabletop, the length of the first and second wings, the distances from the edge, as well as the width of the support block for the system unit from standard values. The drawing looks like this:

• Dimensions of the tabletop (L 1 wing * L 2 wings * W) – 1104 * 1354 * 500 mm.
• Support block with space for the system unit (L * W * H) – 490 * 200 * 734 mm.
• Cabinet with drawers (L * W * H) – 490 * 450 * 734 mm.

The margins are reduced from 70 to 50 mm. In this case, the width of the working area is 50 cm, which is enough for comfortable use by a teenager.

If you are making a small table, make the compartment for the system unit open for better ventilation computer.

Instructions: how to make a computer desk with your own hands

After creating drawings with dimensions, we move on to the practical part of creating the product with our own hands.

From the right choice The material depends on the durability, strength and decorative qualities of the structure.

1. Natural wood is environmentally friendly, durable and decorative material, perfectly amenable to processing. However, working with wood requires a workshop and an arsenal of specialized tools;
2. Laminated chipboard is an inexpensive analogue of natural wood. Plates may have different thickness, sizes and color solutions, allowing the master to create cabinet furniture of any configuration and complexity at home. The main disadvantage of chipboard is its low moisture resistance;
3. Moisture-resistant plywood is significantly stronger than chipboard. However, this material is difficult to finishing, which significantly reduces the decorative qualities of the finished product;
4. MDF is an affordable, heat-resistant and highly decorative material, which has two significant disadvantages: low wear resistance and a decrease in strength characteristics during operation.

The most affordable and easiest to process material from this list is laminated chipboard, which is used as the basis in the production of most models of cabinet furniture.

Tools and preparatory work

Independent creation of corner computer desks requires the master to have a set of tools that will be necessary during the assembly process:

• Circular saw with Pobedit equipment and jigsaw for sawing laminated chipboard in size;
• Drill, drills and cutters - based on the diameter of the fasteners and the method of fixing the parts.

In addition, you should prepare a tape measure, a marker on water based for marking and a carpenter's square.

Materials you will need:

• laminated chipboard (MDF),
• confirmations,
• a specialized drill and hex bit for screwing them in,
• guides for drawers and a sliding keyboard tray,
• PVA glue,
• wooden dowels,
• self-adhesive PVC edge for decorating cutting areas.

Detailing

Knowing the basic dimensions of the future product, we begin to create all the design details.

The dimensions of the internal parts (shelves above the system unit and false panels) take into account the width of the chipboard of 16 mm.

Important! Based on the design and filling of the cabinet (drawers, storage shelves), the dimensions of the internal parts, doors or drawer elements are calculated

Additional items:

1. Pull-out keyboard shelf. If you use a laptop, there is no point in additionally attaching a pull-out shelf. If a table is needed for a PC, the dimensions of the shelf for the keyboard are 550 * 300 mm. You can make it yourself or buy it from IKEA.
2. Drawers. The size of the facade depends on the required number of drawers and is calculated based on the size of the cabinet with a gap between the facades of 2 mm. With four drawers:
   • The dimensions of the facade (taking into account the gaps) will be 450 x 166 mm.
   • Drawer height is 100 mm.
   • Depth - 450 mm (for using standard 45 cm guides).
   • The external width of the drawer is 398 mm, taking into account the width of the chipboard 16 mm and a gap of 10 mm on each side for attaching the guides.
3. Guides. This scheme assumes the use of classic split guides made of two elements. This is the simplest and a budget option organizing retractable structures (drawers, keyboard tray, etc.)

Additional items are optional. In some constructive solutions The cabinet is equipped with a door, without drawers.

Assembly steps

As noted above, assembling the corner model is not particularly difficult. After sawing all the table parts, we begin to create the structure.

Now it is important that the height of these elements is strictly the same. To do this, we place them side by side, and eliminate all differences with the help of adjustable supports.

1. We assemble the corner “leg” by tightening the parts with confirmations.
2. A frame with mechanisms for the keyboard tray is attached to the back of the tabletop.
3. Holes (diameter 8 mm) for dowels are drilled in the side of the tabletop.
4. Holes are drilled in the upper part of the support modules and dowels are installed.
5. To fix the table cover, the dowels are coated with PVA glue.
6. The tabletop is installed in its regular place.

The corner leg and support modules are connected to each other with fiberboard sheets or chipboard strips 15-20 cm wide. Next, install internal filling blocks (guides, drawers), doors are hung, handles and fittings are installed.

Finishing work

If laminated chipboards were used to create the table, then finishing the product consists of gluing the furniture edges to the cut points. This material can be made from:

• melamine,
• ABS plastic;
• natural veneer.

Today, acrylic edges with 3D patterns are widely used, which will add decorativeness to your homemade product and significantly increase its value.

You can also use a T-shaped plastic profile, the installation of which will require creating a groove in the ends of the chipboard using a router.

When finishing the edges of a chipboard table on their own, some craftsmen use a C-shaped plastic profile, which is fixed to the ends of the workpieces with glue.

Important! All options have the right to life except for the melamine edge, which is unacceptable for finishing a computer desk due to low wear resistance and small thickness

If you used to create the product natural wood, That Finishing work are:

• in puttying and grinding of structural elements,
• impregnation of wood with antiseptic and stain,
• varnishing or waxing of the finished product.

• When choosing laminated chipboard, always pay attention to the quality of the coating and the geometry of the sheet. Pay attention to the column indicating the formaldehyde emission class not lower than E1-E2;
• Do not use band saws or jigsaws to cut laminated chipboard. This tool gives virtually no chance of making an even cut without chipping the laminate. The best option There will be an order for cutting the material, gluing the edges and drilling holes (according to your drawing) from the cabinet furniture manufacturer. This will slightly increase the estimate, but will significantly reduce the time for assembling the table. As a last resort, use a hand-held circular saw with a tungsten carbide blade and the ability to install a rip fence;
• Do not use the standard height of a computer desk (750 mm) if you are using a laptop without an external (remote) keyboard. When the arms are positioned high, the back becomes more tense, which leads to increased fatigue for the operator. As practice has shown,.

Reducing the height of the table by only 70 mm completely solves the problem of posture when working on a laptop

There is a computer in every home, and it needs a convenient one, with all the shelves and drawers necessary for comfortable work.

Of course, this piece of furniture can be bought in a store; the range of computer desks is very large, and choosing a design to suit your needs will not be difficult.

But the cost of exclusive custom-made models is quite high. Therefore, many ordinary people are thinking about how to make a computer desk themselves. Before you start creating this piece of furniture, you need to decide on the location of its installation, and only after that start designing the structure. Eat three types

• computer tables:
• straight;
• angular;

combined. Important! To workplace

was comfortable and convenient, you need to choose the right type of structure, while building a table at minimal cost.

The straight design is a classic. When you look at it, it's a simple desk with some extra add-ons. This option is suitable for those people who use the computer from time to time, for example, to communicate on social media. networks. This computer desk is installed against the wall.

Angular

This model is for advanced users who spend a lot of time at the computer. Corner design is preferable in apartments and rooms with a small area, since they occupy the dead zone of the corner. You don’t need a lot of material for this design.

Important! The corner design is not suitable for people who work at a computer; documents and office supplies will constantly get in the way.

Combined

The combination table is perfect option for professionals, since the design has many bedside tables, shelves, and niches. This piece of furniture takes up a lot of space, so it’s not suitable for a small room.

Assembling this structure is more difficult than the first two, but if you are patient, you will be pleased with the result.

Components

Any computer desk, unless of course it is the most simple model, has some functional areas:

• shelf for system unit, should be positioned in such a way that there is Free access, but all the wires were hidden behind work area. The size of the shelf must correspond to the dimensions of the system unit;
• table top– an integral part of the structure, the monitor will stand on it;
• speaker stands– element is required. An audio system takes up a lot of space and it is uneconomical to place them on a table, and the table space should be as ergonomic as possible;
• scanner, printer, MFP - should stand separately, and on the very top shelf, since they are not used every day;
• keyboard stand– although some believe that this element is harmful to health.

Advice! Convenience of work can be increased by providing drawers for storing office supplies.

How to customize a drawing with your own hands?

Once you have decided what configuration of table you need, you can proceed to the practical part - direct manufacturing with your own hands. At the very beginning of the project, the dimensions of the structure, specifically the height, are determined. A standard table has a height of 75 cm, but there is a special calculation formula:

Important! Table height = Height multiplied by 75 and divided by 175.

If a person’s height is 180 cm, then using this formula it can be calculated that the height of the computer desk will be 77 cm.

If you find it difficult to create your own drawing, adapt an existing one on the Internet with your own hands. Classic table for a computer is easy to manufacture and has such components How:

• table top for the monitor;
• keyboard shelf;
• shelves for stationery items;
• drawers for papers;
• two upper shelves for acoustics or decor.

If everything is designed correctly, then there will be a place on the computer desk for all the necessary elements.

After everything has been decided with the project, you need to draw up detailed plan action, which will describe step-by-step instruction assembly of the structure.

Materials and tools

Before starting work at home, prepare everything you need. Materials:

• furniture panels 1.8x20x200 cm – 2 pcs;
• shields 1.8x60x200 and 1.8x40x200 - 3 pairs;
• boards 1.2x12 cm - 6.2 meters;
• plywood 6 mm – 1 sheet;
• guides for drawers – 3 pairs;
• a pair of guides for a shelf under the keyboard;
• accessories and fasteners.

Tools:

• screwdriver and drill;
• hacksaw;
• construction stapler;
• grinder;
• chisels;
• construction corner and ruler;
• roulette;
• sandpaper of various fractions;
• glue;
• brushes and varnish;
• furniture tape.

The materials are indicated based on the assumption that a classic design will be assembled. When creating a custom computer desk, this list needs to be adjusted to suit the project.

Advice! When choosing guides for pull-out shelves and drawers, it is better to prefer ball-type models, despite the fact that their cost is higher than roller ones. The disadvantage of roller elements is that they do not last long, do not extend completely, and do not have a reliable limiter.

How to make?

The assembly of the structure is carried out strictly according to the drawing that was prepared earlier.

How to assemble the lower tier yourself?

The first step is to carry out marking parts on the surface of the material:

• three vertical walls;
• table top;
• bedside table covers.
• All actions are carried out according to the project.

Vertical walls need to be sawed down - the front and top corners are cut 2x2 cm, the cuts are cleaned.

Usually a computer desk is installed close to the wall, so the lower corners are cut down to fit the size of the plinth. Typically this distance is 4.5x5.5 mm.

On the vertical wall at the back, which runs in the center, you need to make a sample; it will be at a height of 26.5 cm. The width of the sample is 20 cm, the depth is 1.8 cm. During assembly, a crossbar will be installed at this place. The sampling is done so that the element is screwed with self-tapping screws flush to the side walls. This panel replaces the rear wall of the structure. In this case, the table will receive proper rigidity and stability.

Once all the elements are ready, holes for fasteners are drilled in the right places. If this is not done, then during assembly the furniture panel may crack at the attachment point. Tighten the elements with self-tapping screws.

It's time to make a niche for installing the system unit. If you are a system administrator or programmer, then you constantly need access to the system unit and its components. Therefore, it is worth equipping a stationary, strong and stable shelf with self-tapping screws.

horizontal shelf and side wall cut to the dimensions of the drawing. Cut off the front corner from the top of the side element and sand it with sandpaper. It’s also worth filing the lower rear corner under the baseboard. Screw the shelf to the side wall, then fasten the structure to the side table stand and the rear cross member. The openings under the shelf and cabinet must be closed with panels cut for the base. The fastening in this case will be dowels. In this case, they are not treated with glue..

The lower part of the computer desk is ready. You can begin building the superstructure with shelves.

Computer add-on

In order for a computer desk to be as functional and convenient for work as possible, the project needs to provide not only shelves, a table top and a bottom for the system unit, but also top part with stripes.

The add-on is more than just extra storage space small items, but also performs a decorative function.

Step-by-step instruction:

1. Mark up necessary elements on a furniture panel, cut out.
2. Carefully sand all cuts so that sharp corners are rounded.
3. The sides will be attached to the tabletop, so you need to determine the attachment points.
4. Make a template 1.8 cm thick.
5. Attach the template to the tabletop and make markings. For more accurate markings at the ends of the template, you need to make holes using a drill and drill bit.
6. Then drill holes in the tabletop according to the markings as follows:
   • using a drill with a drill of the required section, drill through holes in the tabletop;
   • Drill blind holes at the ends of the sidewalls with a drill of the same section.
7. To install the side elements of the superstructure on the tabletop, use a construction angle; it will help to avoid distortion in the structure.
8. The side racks are screwed onto self-tapping screws under the tabletop, with the through and blind holes aligned.
9. Next comes the fastening of the upper shelf of the superstructure; for this, an element of the required length with a width of 31.5 cm is cut out of a 40x200 cm shield.
10. The middle post is cut out of a 20x200 cm board. It should be arranged like the side walls and installed on the tabletop using self-tapping screws, adjusting the perpendicularity of the structure with the construction angle.
11. The next step will be to arrange the rear side. Which is screwed to the sides and the end of the middle element. This process is also regulated by the corner.
12. Now you need to arrange a place for the printer, which is usually located on the left side. Please note that the printer has significant specific gravity, therefore the shelf under it must be strong and stable. For greater structural strength, the shelf is not simply screwed onto self-tapping screws, but is additionally secured to the side walls using furniture corners.

At this point, the work on arranging the superstructure is completed, and you can proceed to the next stage.

Pull-out panel and drawers

Drawers are necessary in a design such as a computer desk. The functionality of these elements is undeniable. How to properly arrange drawers We will now look at:

1. For the bottom of the structure you will need plywood, from which we cut out elements of the required size.
2. We form the side walls from the board.
3. Connect the 4 side elements with self-tapping screws.
4. Using a staple gun and staples, connect the bottom and sides of the box.
5. Important! The width and depth of the inner drawer are adjusted based on the thickness of the guides that will be installed with inside bedside tables.
6. Secure the guides so that there is a gap of 1.8 cm between them and the edge of the bedside table. This is exactly the thickness of the front panel of the drawer.

The rest of the drawers are emptied in the same way.

Screw the guide profile at the required distance from the tabletop, install the brake elements and the shelf.

The construction of the structure is not completed yet. Now it needs to be torn into components and the parts treated with varnish. Once all the elements are completely dry, you can produce final assembly computer desk.

Advice! To strengthen the structure, all end elements and fasteners are treated with wood glue before assembly.

Finishing and decorating at home

Once the structure is finally assembled, they begin to build it. cladding and decoration:

1. The first step is to install the facades on the retractable elements.
2. Cut out the façade elements and sand the cuts. Drill holes at the handle installation locations.
3. Attach the front to the front wall of the drawer and mark the mounting location.
4. Attach façade panel and secure it to the box with the bolts that will secure the handle.
5. For added reliability facing panel secured with self-tapping screws on the inside of the drawers. Self-tapping screws must be taken of such length that they fit into the facing panel a maximum of 2/3.

Useful video

Conclusion

As is clear from the article, there is nothing difficult in creating a computer desk with your own hands. It is enough to follow the instructions exactly and be patient.

Important! If you decide to make a structure from MDF panels, then experts advise ordering the cutting of the material into individual parts in a specialized workshop. It won’t cost a lot of money, and the parts will turn out smooth and neat, with the edge removed.

You shouldn’t immediately take on too much complex designs, if you have no carpentry experience, start with something simple.

In contact with

The computer has become a part of life modern man. Portable devices with small in size do not require separate space for use and storage. But owners of stationary models have to face the question of where and how to make a computer desk in order to conveniently organize a special place in the house. Sometimes it can be difficult to find a table with a convenient add-on that would ideally satisfy all the requirements (design, functionality) and be affordable. Therefore, another formulation of the problem becomes more rational - how to make a computer desk with your own hands, using drawings and master classes.

Structure and size of a computer desk

Plan homemade table for a computer, taking into account all the elements of the system that you use. The standard package includes: system unit, monitor, keyboard, mouse. Complete the list, if necessary, with a printer, scanner, sound system, etc. Look at the ready-made drawings and diagrams of tables, they will tell you where you can place this or that item. Be sure to provide additional space with cabinets, drawers, shelves for papers, textbooks, notes, so that everything is at hand.

A table with an extension should be compact, but at the same time comfortable and not too small. When deciding on the location of the structure at home, be sure to take into account the possibility of access to the electrical network, natural light, sufficient distance from parts of the heating system.

A computer desk can be: straight, corner, combined, transformer. Straight designs are the most common. They can be installed in almost any room. Making a corner computer desk with your own hands means using the corner of the room as efficiently as possible, while creating comfortable spot for using office equipment. The transforming table occupies a special place. It can fit perfectly into any interior. The product can be a closet, a chest of drawers, or a pencil case in which a computer is hidden. There is even a transformable table with small cabinets that turns into a sleeping area.



Universal computer desk

If you do not have experience in furniture production, choose not a transformer, but a simple but convenient classic design of a computer desk with an add-on. It will provide enough space for equipment and necessary materials. And so that New furniture became organic in finished interior, use furniture board or chipboard that is harmonious in color with other furnishings.

Materials and tools

For a computer desk with an add-on you will need:

• 2.5 pine furniture panels 2000x600x18 mm.
• 3 furniture panels 2000x400x18 mm.
• 2 furniture panels 2000x200x18 mm.
• 6.2 m boards 120x12 mm.
• Half a sheet of plywood 1525x1525x6 mm.
• 3 sets of ball (or roller) guides for drawers - 500 mm.
• A set of guides for a pull-out shelf – 400 mm.
• Dowels.
• 3 drawer handles.

In your work you will use:

• Electric hacksaw.
• Drill with drills.
• 50 self-tapping screws 5x60 mm.
• Screwdriver.
• Grinding machine or sandpaper(different grain sizes).
• Square, tape measure, ruler, pencil.

Operating procedure



Making the base:

1. Carefully study the drawing of the table with superstructure. According to the specified dimensions, you need to prepare the structural parts: tabletop, 3 racks that will be placed vertically, bottom, bedside table lid.
2. Select parts that will be placed vertically. Cut off the front ones top corners 20x20 mm. Also remove the lower rear corners of the walls (4.5x5.5 mm) so that the table can be installed flush against the wall, despite the existing plinth. Carefully sand the cut areas and make the front corners rounded.
3. To install a 200x18 mm transverse panel, make a recess 18 mm deep and 200 mm wide at the rear end of the vertical central panel at a distance of 265 mm from the floor surface. This panel is needed for connection 3 vertical racks, it will be attached to them with self-tapping screws. In addition, the transverse part will serve as a stiffening rib for the base of the entire structure of the computer desk, since this product does not have a back wall.
4. After preparing the parts using a drill, drill holes in advance so that when fastening you do not damage the structure of the workpieces. Assemble the frame with self-tapping screws.
5. Let's start creating a stationary niche for the system unit. Cut out the parts (small side wall and horizontal shelf) to the specified dimensions. Cut off the front upper corner of the side part (20x20), round the cut, and sand all the ends of the parts. Connect the sidewall and the shelf, then the entire structure with the side wall of the table with self-tapping screws. Gamers and advanced computer geeks, who often update the equipment of their system unit, prefer to place it on a separate stand with wheels. In this case, use drawings and diagrams from the Internet.
6. In the openings under the shelf and bedside tables, drill holes for dowels. Attach the plinth panels to them.



Let's get started with the table add-on:

1. Cut out the side parts of the superstructure, immediately rounding their front upper corners. Prepare a template with a thickness of 18 mm so that the sides on the tabletop are fixed evenly. Drill holes in the ends of the template with a drill. Then attach the ends to the tabletop, make precise markings for fastening.
2. Prepare through holes in the tabletop, and blind holes in the lower ends of the side panels. Use a square to check that the connection is made correctly. From under the table, screw the screws through the tabletop into the sides.
3. Make markings on the board 2000x400 mm so that you get a shelf 2000x315 and a transverse side bar, which will be fixed at the top of the structure. In addition to the main function, these parts will increase the rigidity of the superstructure.
4. Cut out the middle wall from a 2000x200 board, and attach it to the tabletop in the same way as the large side parts. Check with a square that the connection is correct.
5. We install a vertical central partition. Screw the back bar, which serves as a side. Align the position of the shelf with the square and secure it with self-tapping screws.
6. We make a shelf with a jumper. Select the dimensions of the shelf at your discretion. Make the parts from a 2000x200x18 board. Fasten the parts with self-tapping screws. Computer desk with add-on - ready.



Additional details, finishing:

1. To make boxes, take a 120x12 mm board. Adjust the parameters of the drawers to the dimensions of the side cabinet and pre-prepared guides. Connect the 4 boards with self-tapping screws at the back and front. Use plywood for the bottom.
2. We attach the guides. It is better to start from the bottom, gradually making marks for the next ones, control the symmetry of the arrangement of the paired slats. Please note: the roller guides should not be installed flush with the edge of the cabinet, but slightly deeper. Make an indent equal to the width of the front part of the furniture panel.
3. Cut out the front parts for the drawers from the sections of the shields. Place wood chips between the boxes to determine the size of each panel.
4. We cut out a tabletop from a 400x18 furniture board, subtracting the width of 2 roller guides along which it will move.
5. Disassemble the table into components. Handle thoroughly grinder details. Cover them with 2 layers of varnish. Then reassemble the frame.
6. Attach a handle to the center of each drawer front.

Compact computer desk

Our homemade transforming table will be hidden in the closet. Shelves in the upper part will serve as a convenient add-on. A design feature will be a rotating tabletop, with its help it will be more convenient to use a transforming table.

To make your own transforming desk for a computer, you will need:

• Ready cabinet dimensions 1100x640x2080 mm.
• Furniture board or chipboard sheet.
• Screwdriver.
• Screws.
• Jigsaw.
• Bolts with nuts.
• Furniture varnish.



Description of work

1. Cut out the parts for the table, carefully studying the drawings. Mark the connection points.
2. Make holes for connections.
3. Sand the edges, remove all irregularities, and cut off the excess with a jigsaw.
4. In the part of the tabletop that will move, make a blind hole 35 mm in diameter (center of rotation).
5. Drill a through hole through both countertops.
6. Drive the mounting bolt into the pivot hole and secure it with a nut at the bottom. The transformer is ready.
7. We cut out the shelves and fasten them with shelf holders.