What plaster are used to make figurines for the garden? DIY plaster sculptures: technique, forms and recommendations

Relatively recently, it has become fashionable to make DIY crafts for the garden using plaster. Today, in almost every family that has a private house or a dacha, there is someone who expresses a desire to decorate the local area in this way. For a garden plot you can make various items not only from gypsum, but also with the addition of polymer clay, seed beads, beads, shells, bottles, etc. By using your imagination, you can create a real work of art for your garden with your own hands using improvised means. Such different figures will enliven your garden and bring new and bright colors to it.

Everyone can get acquainted with several master classes on making interesting items decorations local area or dachas made of plaster. Working with such material is a real pleasure, and it also has a pleasant price. In addition, handmade plaster crafts can be painted in different colors, which allows you to decorate the entire garden with interesting and bright objects.

If you have no experience working with plaster, then it is recommended to start making simple crafts with your own hands. In this case, we will consider making multi-colored stone leaves, which can later be placed along the path or near shrubs and favorite plants. Such a master class requires the following materials (photo 1):

rhubarb or burdock leaf;
sand;
cement;
paint as desired.

The sheet must be pre-rinsed to remove unnecessary dirt and dust. After this, you should lay out sand on paper or oilcloth and apply it on top. front side sheet, compact it well and pour already diluted cement on top (photo 2-3).

Cement must be diluted as follows: the dry component is mixed with water until a thick sour cream consistency is obtained. When pouring it onto the sheet, you need to make sure that the solution completely covers the workpiece. All that remains is to let the sculpture dry.

When the craft for the vegetable garden or garden hardens, it must be freed from sand and leaves. Now you can start decorating the craft (photo 4). It can be decorated multi-colored stones, draw pictures on top or highlight the lines with paint. The craft also looks good in its natural form. Colors such as bronze, pink and green are often used for the vegetable garden. Finally, it is recommended to cover the top of the sculpture with a water-repellent mixture or primer so that water does not spoil such beauty over time.

Making garden mushrooms

Gypsum mushrooms will look very beautiful and natural in your garden.

After previous experience, many have probably already become convinced that working with a material such as gypsum is not difficult. Therefore, it is recommended not to stop there and start creating a slightly more complex craft.

Such mushrooms are made using the following materials and tools:

building gypsum;
plastic bottle (you can have several different sizes);
plate round shape;
cling film;
wire;
acrylic paints;

Let's look at the master class step by step, and on its basis it will be possible to make mushrooms of different sizes in order to place them throughout the local area or at least in several places, so that they are not lost in the garden in a single form. To make mushrooms, you first need to create legs for them. To do this, you should cut the prepared plastic bottle, removing its bottom. To make the craft stable, it is recommended to place wire inside the bottle.

After this, we dilute the plaster until we obtain the desired consistency (thickness of sour cream) and pour it into the bottle. The solution must dry completely, only then can the mushroom stem be released from the bottle. To do this, make a diagonal cut and remove the plastic with your hands. Now the workpiece needs to be sanded.

The next step is to make a mushroom cap. You will need a deep round plate and film. The dishes need to be covered with film so as not to spoil them. We dilute the plaster again, pour it inside the bowl and, without waiting for the workpiece to harden, we place the finished leg in the middle. After hardening, the craft can be freed from the bowl and film.

The final stage is decoration. This is where your imagination comes into play, because mushrooms for the garden do not necessarily have to be of a natural color. You can highlight them or decorate them in accordance with the surrounding landscape. When you're done painting and it's dry, don't forget to varnish the mushrooms.

As you can see, this craft is also done quickly and without special effort and costs. In addition, you can involve children in the very process of creating this sculpture - they will also be interested in making real works of art for the garden with their own hands.

Funny flowerbed cat

The next master class is suitable for craftsmen in the matter of creating plaster crafts for the dacha. And if you have practiced with previous master classes, then you can safely proceed to more complex tasks.

We suggest creating a flower bed in the shape of a funny cat. To do this you will need the following materials and tools:

latex gloves;
cement;
gypsum;
sand;
water;
plastic bottle (large);
wire;
wooden slats;
paint and varnish.

First of all, we cut the bottle, which will serve as a flower bed. Afterwards, the form needs to be well wrapped with wire, which will cling to the cement solution, because otherwise it will simply slide along the plastic. Then you need to knock down a frame from the slats and attach it to a plastic blank (photo 5).

Let's start mixing the solution. This must be done at a rate of 1 part sand to 1 part cement. Already in ready mixture gypsum is added, since a solution with this component will harden quickly. Don’t forget to wear gloves and mix the solution itself with a separate stick.

Now you can begin the most difficult part of the process - sculpting the desired shape. You need to take the prepared solution in your hand and add 1 tbsp to it. l. plaster, then knead it in your hand and, rolling it into a sausage, attach it to the frame. So, the solution should be applied step by step, separating the necessary bulges and smoothing the surface of the workpiece.

While the frame dries, you can create a cat's face. This will require experience from childhood, when various figures were sculpted from plasticine. Using the same technology, we create an animal’s face from a small ball. And for better bonding of small elements, it is necessary to first lubricate the body with water, exactly those places where a new layer will be applied.

Finally, with wet hands, polish the surface of the craft. For better drying, the product must be covered with cellophane and set aside for at least 3 days. However, you shouldn’t forget about the cat. On the first day of drying, it must be additionally moistened with water. When the craft is completely dry, it should be sanded using sandpaper (photo 8).

All that remains is to paint the cat. It can be done water-based paint, car paint or enamel. After painting, it is necessary to coat the surface with varnish so that the garden flower bed does not deteriorate under the influence of unfavorable weather conditions.

(1 ratings, average: 4,50 out of 5)

Many of us have dachas and garden plots. Some people go there for the harvest, while for others it is their favorite place to relax. All dacha owners want their yard to be cozy and beautiful. Today, not only lawns, exotic flower beds and fountains are in fashion, but also funny sculptures. They may become original decoration plot, especially if you put in the effort, use your imagination and make garden figurines for your dacha with your own hands. With such decoration, your site will become exclusive, acquire uniqueness and its own personality, and become unlike anyone else. The figures will please the eye not only of the owners of the site, but also of their guests.

Of course, you can buy ready-made sculptures for the garden, for example, from artificial stone, plastic or plaster. But do figurines for the garden It's much more interesting on your own. You will create a piece of jewelry that no one else will have. In addition, this activity is very exciting and uncomplicated, you will be able to free time usefully and show your Creative skills. You can create figures from scrap materials. If there are children in the family, then you can make garden sculptures with them.

Figure options

You can create anything as long as you have enough imagination. For example, fairy tale characters. Near the house you can place gnomes who will guard the country house. These could be firebirds. If you have a pond, then funny frogs will fit perfectly into the space around it. Some corner of the site can be set aside as a mushroom clearing. You can also place figurines depicting animals in the garden. If you have a good imagination, you can come up with a whole fairy-tale town.

Gallery: DIY garden figures (25 photos)

Material selection

Anything can come into play. More often country decorations made from the following materials:

tree;
gypsum;
plastic bottles;
car tires;
polyurethane foam.

The first and most basic rule is garden sculptures must match general style garden And appearance house. You should not make figures based only on your own imagination. The figures must be made not just beautiful, but in such a way that they fit into the surrounding space, otherwise they will not become a decoration, but, on the contrary, will disfigure the whole picture.

For example, if you have garden plot issued in Japanese style, then the figures must be Japanese. Palm trees, gnomes, and mushrooms will look absolutely ridiculous here.

If your site is registered in romantic style, That perfect option– garden figures made of plaster in the form of hearts, doves, flowers, angels. They will fit perfectly into a high-tech garden. metal constructions. If your site has a rustic style, then plaster figurines created in the form of mushrooms, trees, flowers, etc. will fit well here.

One of the conditions that should be met when decorating a garden with sculptures is moderation. You should not clutter the area too much with figures, otherwise you risk turning the garden into a museum. Too much decoration will look tacky. They should only complement the space and not come to the fore.

Another important principle is the figures must fit in size. If large trees grow on the site, then the decorations should be massive. Small figurines here will be invisible and lost. Large figures in small garden, where there is no tall trees, will look ridiculous.

If you are making several sculptures, then they must fit together by topic, color scheme, in shape, material of manufacture. Metal and plaster figures should not be placed nearby. Jewelry in Japanese and rustic styles at the same time, etc.

Pink flamingo made from plastic bottles

Plastic bottles are the most economical option . Everyone has them, and you can create anything from them. One of the popular figures today is the pink flamingo. Such garden sculpture, created with your own hands will be a wonderful decoration of the site.

Materials and tools:

First you need to make flamingo body. To do this you need to take one large bottle. You need to make a hole in the lid. A metal rod is inserted into this hole. He will act as a neck. You need to make two holes at the bottom of the bottle; legs will be inserted into them.

Now you need to make plumage for the flamingo. The remaining bottles need to be coated with paint. Pink colour. Now you need to cut them into feathers.

After the plumage is ready, cuts are made in the body of the bird in the number of feathers expected. Each part is attached to a notch.

Now it's time to make the neck and head. The rod that was attached to the hole on the bottle cap must be covered with a hose. The flamingo's neck is ready. The head is cut out of a bottle. The beak can be made from wood, plaster or foam.

Now let's make the legs. To do this, the two remaining metal rods are inserted into the holes at the bottom of the bottle and carefully secured.

On last stage you can decorate the bird as your imagination dictates.

On average, flamingos are 1.5 meters tall. You can make it higher or lower. But you should remember that the figure should not be too large.

Giraffe made of wood

One of the most affordable and natural materials for making figurines - wood. It will appeal especially to those who prefer garden decorations made from environmentally friendly materials. You can create whatever wooden figurines you want with your own hands. The material used is stumps, branches, logs, driftwood, etc..

All this is possible in large quantities find in the nearest forest, and someone has such goodness in bulk on their plot. You can make wooden sculptures with your own hands in the form of a couple in love, funny people, fairy-tale heroes. You can arrange a whole zoo of domestic or wild animals. Or, for example, build a scene from some cartoon that you loved as a child or that your children (grandchildren) love now.

You can make anything from wood, even an exotic giraffe.

Materials and tools:

In order for the figure to be stable, you need to do for it foundation. It is necessary to dig a small hole and pour cement solution into it. Immerse future giraffe legs in it and leave to harden.

The next stage is making the head. It is made from a canister. If the canister has a handle, then it needs to be cut off. Two holes are cut at the proposed crown. Branches are inserted into them - these will be the giraffe's horns. You need to make slits on the sides for the ears. Ears are cut out of a plastic bottle. The snag will serve as the body.

To fasten the torso and head, a hole is cut in the canister, which serves as the head. Now the head is put on the body.

Gnome made of plaster

You can make various sculptures from this material, and they will durable and waterproof. If you make a small figure, then the base is not needed. If you make sculptures large sizes, then you will need to first make the frame and foundation.

Having country cottage area, you always want to arrange it, and in some special way. However, garden decorative elements They are not cheap, and they are not durable.

People with developed imagination can do original crafts for a garden made of cement, which is not only highly resistant to various types of influence (frost, hail, sun, water), but also accessible (you can buy it at any hardware store for a reasonable price).

Can be used for decoration and design addition flower pots, flowerpots, figurines of fairy-tale characters or objects flora made with your own hands from cement. This material cannot be called capricious, and most people have a lot or little experience working with it. Still there are a few important rules that must be observed in order for crafts made from cement mortar to be of high quality and durable.

The technology for preparing the mixture is as follows:. The main components are prepared: cement, construction sand, water and tile adhesive (for better ductility and reducing the risk of microcracks). For 1 part of cement, take 2 parts of sand (for greater strength, you can take 1 part) and 1 part of glue. Lastly, add water in small portions to the consistency of thick sour cream. It is convenient to work with such a mixture: it does not flow and at the same time is quite plastic.

All cement products require prolonged drying. Hardening can last up to 7 days. To prevent the surface from cracking, the finished creation is covered with polyethylene. To give the product a beautiful and regular shape, the base is placed on a mound of sand or buried in it (depending on the idea), but not on a flat surface.

After complete hardening, the figure must be coated with a primer and only after that can paint or varnish be applied. If the craft has roughness and other irregularities, it is modified before priming sandpaper and a file.

In addition to cement mortar, concrete is sometimes used, which is characterized by the presence of large fractions (pebbles or crushed stone) and increased strength. Crafts made from concrete for a summer residence can be represented by large monolithic boulders, and this material is also convenient to use to create the basis for various compositions (a platform for a fountain, a pedestal for a sculpture, a terrace for flower pots And so on).

Another material similar in its application is gypsum. It is not as strong as cement, but more plastic and decorative. It can be used to create hollow shapes. For garden creativity, molding (sculptural), acrylic and architectural types are used. When working with this material, you need to take into account its rapid hardening. It is often recommended to add it to cement mortar when creating sculptures.

Having no experience using cement in decorative purposes, it is better to start with something simple that does not require modeling skills and obtaining the desired consistency. The first exhibits in your garden can be cute mushrooms, colorful balls or original pots for flowers.

To make a mushroom you will need an old rubber ball (the size of the cap will depend on its size), a plastic bottle (it will become the basis for the stem, its size should be proportional to the cap), metal rod ok for attaching the cap to the stem. The ball is cut into two halves, one of which is placed in a bucket of sand and pressed evenly. Next, cement mortar is poured into the resulting form and leveled.

The bottom and neck of a plastic bottle are cut off and inserted into the filled form in the center, immersing it by 1 - 2 cm. Then, using a long iron rod, the future stem and cap of the mushroom are connected and the cavity inside the bottle is filled with the solution. The product should harden for several days, after which you need to remove the piece of the ball and the plastic cylinder.

After a few more days, the product can be coated with paint and decorated with various elements. Mushrooms of different sizes look impressive on the plot in the form of a small clearing. It is also worth noting that your imagination may tell you to use other containers (bowls, jars) and methods for making garden mushrooms.

It’s enough to just make an openwork ball that seems so light and airy. For the base use balloon IR(the size of future figures depends on how much you inflate the balloon). Next, any rope is placed in the prepared solution and then the ball is wrapped around it.

Do not wrap the base too tightly; you need to leave enough holes for further removal of pieces of the burst ball. When the product is dry, you can begin decorative coating.

If you cover the balloons with cement mortar with a small amount of gypsum added for faster hardening, you can get original garden lanterns or flower pots.

Using this technique you can also make vases for dried flowers. In this case decorative painting Not only the outside, but also the inside is exposed.

If you pour the solution into small hole rubber balls, you can get monolithic balls of different sizes. Painted in different bright colors and randomly scattered around the garden, they will become a laconic and stylish decoration.

Using plastic containers, you can make a flower pot for Crassula and Crassula Ovata cacti. The container is wrapped plastic bag, and a bag of clay or sand is placed inside so that the container holds its shape. Next, it is covered with cement mortar. After complete drying, all auxiliary materials are removed, drainage holes are made in the bottom using a drill, the product is primed and painted.

It's very easy to make a flowerpot using a plastic bucket or vase and another suitable container.

One container is inserted into another, and the solution is poured into the space between them. The result is a high-quality product that can be further decorated by showing your imagination to the fullest.

Flowers planted in flowerpots made from crossed palms look attractive. To create such a masterpiece, use ordinary rubber gloves, which are evenly filled with the solution. For rigidity, you need to insert a thick wire rod into each finger. To ensure a high-quality product, air bubbles must not be allowed to form.

When the gloves are filled, they are given the desired shape and fixed. After a few days, the rubber is cut and removed. If you need to connect two palms, then use the same solution. At the final stage, the surface is polished with sandpaper, primed and painted.

Complex figures with a frame

It's more fun to decorate your Vacation home sculptures of animals and mythical characters. Such creations involve the preliminary production of a durable frame and layer-by-layer application of cement mortar.

Interesting flowerpots can be made using buckets from building mixtures. At the first stage, a container of suitable size is wrapped plaster mesh and covered with a thick layer of cement. At the second stage, until complete hardening, decorative adjustments are made, making an imitation of an old stump with natural wrinkles on the bark.

Up close artificial reservoirs A monolithic figure of a hippopotamus would look appropriate. The place for it must be determined immediately and carefully leveled, since in the future the figure will be stationary.

Two elongated plastic basins, which must be fastened with wire, are suitable as a frame. Another option is also possible: a thick cement solution is covered on top of a pile of broken bricks or crushed stone.

The figure itself does not contain complex elements and easy to perform. After hardening, the product is treated with fixing impregnation and dry pigment for concrete, rubbing the powder with a hard sponge.

More complex sculptures are made in several stages: 1) making a frame from wire and foam plastic or containers; 2) covering the workpiece with a plaster mesh; 3) applying the mixture in several layers; 4) formation of small details (facial features, special texture, folds of clothing, etc.); 5) priming and painting the finished work.

Flowerpots in the shape of swans will become an elegant decoration of the garden. The body frame is an old plastic basin, the neck is woven wire. The head, wings and imitation plumage will have to be made from a cement mixture, showing the skills of a sculptor.

Monolithic figures have a significant weight, so as an alternative there is a way to create lightweight large objects. You can decorate your garden with boulders of different sizes.

To make them, any unnecessary and light material (trimmings) is tied into a tight lump with wire polyurethane foam, plastic bottles, foam).

The resulting base is wrapped in a plaster mesh and covered with thick cement mortar. The more irregularities and protrusions there are, the more natural the “stone” will look.

Small garden figurines are made from a mixture of cement with the addition of gypsum or Portland cement.

Here you can use the manufacturing methods described above, as well as any basics: old toys, items of clothing, household utensils.

Step-by-step manufacturing instructions: 3 master classes

To take a closer look at the nuances of the creativity presented in the article, let’s look at best master classes with a step-by-step explanation of the work being carried out.

1. Spectacular flowerpots made of cement and fabric

To make flowerpots for the garden from cement and fabric, use either pure cement or Portland cement. In this case, the mixture with water should be quite liquid. You will also need a bucket or other container for the frame, a piece of polyethylene and a piece of fabric.

The material must be dense enough and absorb liquids well, i.e. synthetics will not work here. It is better to use cotton fabric.

Cut a piece of the desired size. If you need smooth edges, then round them;
We wet the material generously in the solution;
We attach polyethylene to the prepared bucket;
Lay the fabric soaked in the solution on top and smooth it out;
After 2 days, the cement will set and the bucket can be removed;
The product is lightly moistened with water and left to dry completely for another 5 days.

Even large-sized plants can be planted in a ready-made flowerpot.

Experiment with the shape and coloring of flowerpots and create your own unique compositions.

2. Funny cat for the garden

First, we prepare a frame from a cut plastic bottle and wooden slats, which are fastened with wire.

The solution is prepared from cement and sand in a 1:1 ratio; additionally (directly into the hand) gypsum is added during the work. By gradually applying the solution, all the details of the sculpture are created.

The finished figure is polished with a damp hand and left to dry for 4 days. The final touch is painting with water-based emulsion or enamel.

3. Large leaf drinker for birds and pets

An equally successful and versatile garden decoration would be a sheet of cement. A plastic film is laid on a mound of sand, and then - large leaf(the mound will allow you to get a figure with a depression, rather than a flat one). If there are small holes in the sheet, they should be covered with small leaves so that the cement mortar does not leak.

Cover the workpiece with film for several days until it dries. Then the sheet is removed, primed and painted.

If desired, you can make a fabulous fountain from several similar blanks.

DIY garden crafts can bring you great pleasure. Choose the figure that best suits your character and the design of your garden. Let's try to make garden figurines from cement with our own hands. The process, surprisingly, is not as complicated as it seems. But the result is truly surprising!

See what beautiful flower containers you can make from cement mortar and an old rag. This is truly crafts made from scrap materials!

Decorative openwork ball made of cement.

To work, we need a cement solution - mix a thick solution of 1 part sand, 1 part cement.

We immerse a rope in the solution, it can also be strips from an old T-shirt, etc. We inflate the balloon and prepare a stand for it where it will dry. This could be a regular bucket. We wrap the ball with a rope in cement mortar.

After the solution has dried, use a needle to blow off the ball. All! Our garden art object is ready. Can be painted if desired.

Original crafts for the garden made of cement.

Agree, it looks like dragon eggs)) We will make this from cement.

We take the same balloon and cover it with cement mortar. Here you can add a tablespoon of gypsum to the solution, but you need to work quickly.

After the solution has dried, remove the ball and paint the inside of the egg. Can be used as easter decor at the dacha - having done it in it flower arrangement from primroses.

Crafts for the garden. DIY garden gnomes made of cement.

These cute garden gnomes are also very easy to make.

For the gnome we need cement, a metal rod, stocking and rope. Pour the cement solution into the stocking and insert it into it for strength. metal fittings. By twisting the rope, we form noses and legs. Let's not forget about the beard - this is an additional piece of material under the gnome's nose. Hang the gnome by the top of the cap and leave to dry.

When the cement has dried, remove the gnome and polish the top with a more liquid solution of cement and gypsum. We are waiting for the gnome to dry and we can tint or paint it. Pretty guys, aren't they?

Garden fountain with leaves.

We will not talk about the principles of creating a fountain in the country. This is the topic of a separate article, and you can read about it in detail here. We will make leaves from cement.
>

We need a fairly large sheet, and with the help of cement, we form a copy of it.

After drying, the sheet can be worked out in more detail and painted.

And you will become, almost free of charge, the owner of such a beautiful fountain.

Original do-it-yourself flower beds.

Are you not a sculptor at all? But believe me, you can make these creative flower containers.

We need plastic container, foam plastic, reinforcing mesh. We make a cement solution by adding a spoonful of gypsum directly into the palm with the solution and thus form our “sculpture”

But not all of us are fans of modern abstract art. But you can easily make garden crafts in a classic style.

But, because You are not a sculptor yet, you need a template - it could very well be an old doll.

Because it will not be just a decorative garden figurine, but a flower garden in the form of a girl’s head, then top part needs to be trimmed.

Then the head is painted. To add texture, the template is first painted with dark gray paint. Allow to dry and apply a layer of lighter paint. After drying, apply a layer of even lighter paint with light strokes.

This is a very simple process, and all the examples of this style that you see in the article were made by teenagers in a craft class.

Beautiful crafts for the garden. DIY garden figurines.

For those who liked the process of making concrete crafts, we will also tell you a simply stunning technique for creating garden figurines.

Yes, we will need the old doll again!

First, we strengthen the doll using hot glue and a bamboo sushi stick on a heavy stand. By the way, we can also make it from cement. We cut out angel wings from foam plastic and attach them to the doll with hot glue. Let's give the doll a new dress and, with the help of strokes of hot glue, create a more interesting texture on the wings and hair.

We coat our template with a solution of cement and gypsum. Let's paint.

Now, with the help of old toys, you can make almost any garden figurine yourself.

Cat flower bed.

This cute flowerbed cat is made from a plastic bottle and cement. We will need: cement, sand, plaster, water, large plastic bottle, wire, paint, wooden slats, varnish

The owner of this cat, Natasha Koneva, will tell us how to make such a funny figurine with her own hands. Trimming plastic bottle- it is this container that will be our flower garden. To prevent the cement from slipping off the plastic, we tightly wrap it with wire. Knock down from slats wooden frame. We attach our plastic container to it.

Mix the cement mortar with the consistency of thick sour cream at the rate of 1 part sand, 1 part cement. We will add gypsum only to the finished portion that we have in our hand, because... the solution with gypsum hardens instantly. We work in rubber gloves.

Take a handful of solution in your hand and add a tablespoon of gypsum to it. Knead it in your hands, roll it into a sausage and attach it to the frame. So, step by step, we apply portions of the solution on top of each other, creating the necessary bulges and smoothing the surface.

We sculpt our cat’s face from small balls of solution in much the same way as we sculpted from plasticine in childhood. In order to small parts held on better; before attaching them to the body, we lubricate the surface of the figure with water.

With a damp hand we polish the surface of our garden figurine. To dry, cover the figurine with cellophane for 3-4 days. On the first day, the figurine must be periodically additionally moistened with water. After drying, sand the surface with sandpaper.

You can paint such a figurine with water-based paint, enamel, or car paints. After painting, coat the surface with varnish. For the winter, the garden figurine must be removed from the street, because... It may crack due to frost. You might also want to get yourself such a wonderful cat.
The great thing about cement figurines is that they are cheap to make compared to garden figurines made of metal or wood. You can start with simple crafts for the garden, which can be no less interesting than some particularly complex ones. You can combine cement with other materials. - for the face of this little garden fairy " Ladybug"Took the head of an old doll.

Gypsum is an environmentally friendly material, harmless and very cheap, which means that it is available to everyone who wants to make interesting and useful products with their own hands. Working with gypsum is a real pleasure, because this material can take absolutely any shape and hardens quickly. By the way, it can also be painted in different colors. Our master class will tell you how you can master this skill without much difficulty.

What you need to make colored plaster crafts with your own hands

To start making crafts from plaster, you need to stock up on a certain set of materials:

Gypsum;
Paints;
Water;
Spoon;
Molds;
Plastic jar.

Many who have decided to start making plaster crafts are wondering: how much does plaster for crafts cost? It is worth saying that this material has a low price, therefore it is considered one of the most available types handicrafts. You can buy it at any hardware store.

Particularly worth mentioning are the molds. In fact, you can use any containers as molds, but here Silicone forms Ideal for working with plaster. Where to buy molds is absolutely not important.

We make plaster for white and colored crafts

Everyone who has ever worked with this material knows how to make plaster for crafts. All you need is water and a mixture of plaster. First you need to pour water into the container, and then add plaster, as in the photo:

The mixture must be brought to such a state that it seems like liquid sour cream. Immediately after this, it can be poured into molds.

If you want to make a colored craft, then you need to follow the instructions:

1. First, we make gouache. You can add a little water to the jar, close the lid and shake. This is necessary so that the paint is completely dissolved.

2. We pour the diluted gouache into the container for preparing the solution.

The mixture should resemble liquid sour cream in consistency.

4. The next step is to pour the plaster into the mold

5. And finally, it remains to dry.

You can make anything you want from colored plaster, for example, hearts.

Or these swans for the garden:

DIY plaster crafts for the garden

In order to make wonderful garden mushrooms from gypsum, you will need:

Round plate;
Bottle;
Cling film;
Acrylic paints;
Construction gypsum;
Wire.

Find out how to make a mushroom quickly and efficiently here:

First of all, you need to make the stem of the mushroom; to do this, take a bottle and cut off the bottom of it. You can also add a wire to the middle of the stem, then the mushroom will be stable.

Then you should dilute the plaster with water and pour it into the bottle. The consistency should be like thick sour cream.

As soon as the plaster has hardened, it should be separated from the bottle; for this, a small cut is made directly diagonally.

The next stage is to move on to the mushroom cap and place a food bag inside.

After this, we dilute the plaster again and pour it inside the cup, and place the leg in the center. Once the plaster has hardened, it can be removed from the cup.