How to remove a door or window from its hinges. How to dismantle a plastic window Removing plastic windows from hinges

Plastic windows can last for several years without any problems. But if any damage occurs, it will be possible to remove it without any problems. plastic window from the hinges without damaging it.

However, before that, you need to carefully inspect the hinges. If they are damaged and / or there is corrosion on them, then it is recommended to remove the window very carefully so as not to break them completely. It is advisable to replace the hinges immediately.

In order to remove the sash from the hinges, you need to remove the plastic caps that protect the hinge structure and at the same time serve decorative element. To get rid of them, you need to pry them with a knife or a screwdriver (you can remove them without tools). They are easy to remove and at the same time they are very difficult to damage, as they are made of high-quality plastic.

It is important to choose the right tools. You will need: screwdriver, knife, tweezers, pliers (most often you only need a screwdriver). The dimensions of the screwdriver should be selected based on the dimensions of the fasteners. You may need some kind of stubborn tool - a long stick, a crowbar. The tool should not be too long and sharp.

Withdrawal process

To remove the sash of a plastic window, you need:

To begin with, you will have to loosen all the adjusting bolts with a suitable size screwdriver. The bolts do not need to be removed from the structure. If the bolts are rusted or difficult to give in, then thoroughly rinse the structure (you can wipe it with vinegar). However, the design of some upper hinges is completely disassembled.
Then you need to pull out the stem. This can be done with passages or a screwdriver. Do not be afraid to use force, since the stem and the structure itself are made of durable material and it is problematic to break them. Also, in order for it to come out without problems, it is recommended to thoroughly rinse the structure (you can wipe it with vinegar or alcohol).
When the rods are removed from both wings, you can proceed to remove the window itself. You need to lift the window (you may need to use additional tools). Do this carefully so as not to damage the plastic or glass.

When the window is removed, then you can proceed to a more detailed repair. To replace the loops, they will have to be completely removed not only on the top, but also on the bottom, and you will also need to make some measurements to find the loops you need in size.

There are often times in life when you need minor repairs windows or doors, which you can do on your own. In most cases, in order to produce it, it is necessary to remove the door leaf or window opening from the hinges on which they are held. How to remove the door from the hinges so as not to spoil them? How to attach everything in its place? Let's deal with these questions together.

Preparing to remove the door leaf

Before proceeding with the removal of the door or window from the mounting loops, they are visually inspected. Inspection is necessary to determine the type of hinges used and the selection of tools.

Door or window hinges come in two main types:

detachable, which are two blocks that are inserted one into the other;
one-piece or universal. They consist of one element equipped with hinges.

On the next step you need to prepare the necessary tools:

screwdriver, suitable in size to the diameter of the fasteners. You can use a screwdriver;
stubborn tool: axe, crowbar, long stick and so on. Anything that can help make a lever that makes the removal process easier.

If it is necessary to remove a product made of plastic, for example, balcony door, then the thrust tool should not be sharp, as this may damage the blade.

The process of removing doors and windows from hinges

After inspection and preparation of tools, you can proceed to the removal door leaf or window sash with hinges.

Removal and re-installation of the door using detachable type hinges

If detachable-type hinges are used to fasten the door, then the removal process is reduced to the following steps:

all decorative caps and overlays are removed from the hinge, giving the mechanism an aesthetic appearance;
all adjusting bolts are loosened to a minimum (if any are provided for by the hinge design);

the pin connecting the two parts of the loop is removed. With a tight entry of the pin, you can use a hammer, but you should not hit the device hard, as you can ruin the entire loop;

with the help of a thrust device, the door leaf rises up a few centimeters. However, one part door hinge comes out of another part;

the door is retracted to the side and completely removed.

When carrying out the fourth and fifth points of work, the utmost attention and help of another person is required. The door leaf is quite heavy. So that it does not fall, it must be constantly held.

The door, removed from the hinges, is subject to the necessary repairs, after which it is installed in its original place.

Installation requires doing all the work in reverse order according to the list:

the door is pre-hung on the hinges, they are joined together. Here you will need the help of another person or a persistent mechanism that maintains the canvas in a state of balance;
a mounting pin is inserted;
the necessary adjustment is made;
decorative elements are installed in their places.

How to withdraw plastic door with split-type hinges? According to the same scheme. The main thing is to pay attention to the use of a thrust device.

Plastic is a very soft material. For emphasis, it is advisable to use a non-sharp device. A rubber gasket can be placed between the stop and the door leaf.

What to do if the hinges are rusted and do not separate

With prolonged use of the hinges, a plaque in the form of rust may form on the latter, which interferes with the analysis of the mechanism. If plaque occurs, do not apply great force to the loop and knock on it with a hammer. This can harm and completely disable the mechanism. To remove plaque you need:

purchase a special tool in the store, for example, WD-40 aerosol;
strictly following the instructions attached to the substance, apply a layer of spray on the rusted place;
wait for a while (on average, it takes from 6 to 12 hours).
remove the agent with a dry and clean cloth.

After such a procedure, the rust dissolves, and the loop can be freely disassembled.

If necessary, the whole procedure can be repeated several more times until the harmful plaque is completely removed.

So that the hinges do not rust, they require constant care, which consists in.

Removal and installation of the door leaf from one-piece type hinges

One-piece loops differ from others in that they are not disassembled into their constituent elements. To remove the door from one-piece hinges, you must:

first remove all decorating elements;
using a screwdriver, unscrew the fixing screws on one side (either from the door or from the jamb).

How to put a door on universal type hinges? You just need to put the door back and fasten the fasteners.

When using one-piece hinges, the procedure for removing and reinstalling wooden and plastic doors is no different.

How to remove and install a window sash from the hinges

The plastic window has a slightly different hinge design than the doors. As a rule, in the manufacture of windows, only detachable hinges are used, installed at the top and bottom of the sash.

So, let's look at how to remove a plastic window from its hinges and what is required for this. First of all, you need to prepare the following tools:

screwdriver of the appropriate size;
a small hammer, preferably with a rubber gasket;
pliers.

The PVC window is made of soft material Therefore, all work must be carried out with the utmost care. Removing a window occurs in several stages:

the window sash opens slightly in the rotary direction for direct access to the installed hinges;
all are filmed decorative caps installed during window installation;

removal work begins with the upper loop, from which it is necessary to pull out fastener- spindle. To do this, several not strong taps are made on the upper part of the loop. The spindle goes down the loop, where it can be grabbed with pliers and finally removed. Top hinge disassembled;

the window sash is lifted up, thereby disassembling the lower hinge into two component parts;

the window is completely removed.

As can be seen from the diagram, the answer to the question of how to remove the sash of a plastic window from its hinges is quite simple. All work can be done without the help of specialists and other people.

The sashes of a wooden window are removed using a similar technology.

After carrying out the necessary repairs, the window sash must be put in its original place. To do this, all steps are carried out in reverse order:

the window is put on the bottom hinge. To do this, the sash is slightly raised and docked with the rest of the loop;
the upper loop is joined;
a mounting pin is inserted into its place (in the upper loop);
loops are adjusted. This process is necessary, because during parsing, the initial setting of the loops gets lost;
decorative caps are installed.

Thus, to remove the door from the hinges, you will need minimum set tools that almost every man has. Following the instructions given, all work on the removal and installation of hinges can be carried out independently, that is, without the help of specialists. Work with plastic windows and doors is recommended to be carried out very carefully so as not to damage the coating and the structure of the material.

Hi all! A friend unexpectedly calls me and asks how to pull out a double-glazed window from a plastic window.

I ask him what happened, why he didn't call me.

He says that the matter is urgent: the wife decided to wash the windows, but there are no sashes in them, the developer did not provide, so they need to be removed.

I had to explain over the phone how to do it. Then, however, he suggested simply replacing the window with a casement window.

But if you find yourself in a similar situation, I recommend that you familiarize yourself with useful information indicated below.

A large window area is occupied by a double-glazed window - about 80% of the window structure and is its most vulnerable part. Sometimes situations arise when you need to remove a double-glazed window from a plastic window.

Quite often, such a need arises when you decide to replace your double-glazed window with a more improved one, for example, with a large number of cameras or using energy-saving glasses, etc.

Also, the need to replace a double-glazed window arises when a double-glazed window cracks, breaks, or loses its tightness due to illiterate installation.

Perhaps you need to finish the outer slopes already after the time has elapsed after installing the window, and there is no access from the street and there are blank windows, then you will also need to remove the double-glazed window from the plastic window. It is worth saying that this process is not quite complicated, but it requires certain knowledge.

If you are confident in your abilities and want to avoid additional material costs for calling a master, our article will help you figure out how a double-glazed window is held in the frame and how it can be removed from it.

How is the double glazing held in the frame?

The double-glazed window is held in the window frame with the help of glazing beads; this method of fastening was also used in old wooden structures.

Beads, as well as window profile, made of PVC, and inserted into the frame in the plane of the glass. You must take into account the position of the glazing beads so as not to damage the window during the process of removing the double-glazed window.

Required Tools

In order to independently remove the double-glazed window from the plastic window, you will need:

protective gloves to avoid possible cuts;
screwdriver;
putty knife;
sharp knife;
rubber suction cups.

Instruction

If you need to remove a double-glazed window from the sash of a plastic window, then first you need to remove the sash itself. To do this, pull the retaining rod out of the top hinge and now detach the sash from the window frame.

Lower the sash and gently lean against the wall. Now let's move on to the glazing.

Attention! Be careful and careful not to accidentally leave scratches on the window profile.

Take a knife or spatula and stick to the vertical seam between window frame and bead.
Now gently pry the bead and slide it.
Repeat this action along the entire length of the glazing bead.
Carefully remove the glazing bead from the frame, moving parallel to the glass.
Remove the lower horizontal bead in the same way, then the second vertical one, and finally proceed to the upper horizontal one.
When you remove the top bead, be sure to hold the double-glazed window with your hands.
After all the glazing beads have been removed, it is necessary to remove the double-glazed window from the frame.
You can use rubber suction cups.
If there are none, then you can do it with your hands, be sure to wear gloves for protection.
Gently pick up the upper edge of the double-glazed window with your finger, and then tip the double-glazed window towards you, move your hands and take the double-glazed window by the sides.

Note!

Large double-glazed windows should be removed only with an assistant. While you are removing the glazing beads, the assistant must secure the double-glazed window from falling.

How to remove glass from a double-glazed window?

A double-glazed window usually consists of two or three glasses. In order to remove the glass from the double-glazed window, it is necessary to carefully cut the top layer of sealant with a knife. Now carefully remove all layers of sealant and get to the aluminum frame of the double-glazed window and remove the glass.

Installation of a double-glazed window

Now let's talk about installing a double-glazed window back to window frame. Before installing a double-glazed window, you must make sure that there is no dirt and dust in the opening on the frame folds.

Unlike dismantling a double-glazed window, when installing it, short horizontal glazing beads are first hammered, and then proceed to the side vertical ones.

To do this, manually insert the bead shank into the bead groove of the frame. Using a rubber mallet, fully insert the glazing bead into the groove, apply medium-strength blows.

Having installed all the glazing beads, you can begin to restore order. Wipe down new glass. If there are small scratches on the frame and glazing bead, clean them with a fine emery cloth.

Removing a double-glazed window from a plastic window, as you can see, is quite simple, without resorting to the help of a specialist.

Note!

It is important to understand that a double-glazed window is the most fragile and vulnerable part of a window, and such actions should be performed only when absolutely necessary and with full confidence in knowing the features of the process.

source: http://okna-prof-donetsk.ru

Modern plastic windows are a rather complex technical design.

A double-glazed window is the most vulnerable part of a plastic window, which often fails.

At first glance, it seems strong and reliable, but it is quite fragile and should be treated with the most careful way.

Glass is protected by all sorts of protective films and coatings, but it can easily break or crack.

To replace a worn or broken double-glazed window, many resort to the help of window repair specialists.

But if you strictly follow all the rules, then it is quite possible to perform this procedure yourself. Basically, the need to replace old double-glazed windows arises when you want to replace them with more advanced ones, with an increased number of sealed chambers or with improved sound and heat insulation properties.

However, it also happens that, through negligence, a double-glazed window breaks, cracks or becomes unusable (tightness is lost). It is not necessary to change all window construction, it is enough to replace a single double-glazed window.

Of course, it is better not to take risks and order the replacement of a double-glazed window of a plastic window by specialists with sufficient experience. They will be able to quickly and efficiently install in short time new double-glazed windows in your windows.

However, the cost of such work, which depends on the complexity of the process, the delivery distance of new double-glazed windows, the urgency of the order, the size, configuration of the double-glazed window itself, and other factors, leaves much to be desired.

Specialists from the company who are engaged in the production and repair of plastic windows, first of all, must make all the necessary measurements of the double-glazed window using a special measuring tool.

Double-glazed windows are made in special workshops, after which they are ready-made delivered by specialized transport to the desired object.

Then the old one is dismantled and the new double-glazed window is installed in the metal-plastic window. In rare cases, you can replace the glass of a plastic window yourself.

Of course, you cannot make a double-glazed window with your own hands, so you should carefully measure all the parameters and dimensions of the window, and then order a double-glazed window from a company that manufactures them.

Useful advice!

As soon as your order is completed and delivered, you need to start the process of replacing the double-glazed window.

Metal-plastic windows can be installed using special mounting plates with a through, through the frame, fastening of the window unit to the walls, but many people who decide to install them on their own are scared by the question of how to remove a double-glazed window without having a special tool.

source: http://estroyka.com

What tools might be needed?

It is possible to install metal-plastic windows with the help of mounting plates, and with a through, through the frame, fastening of the window block to the walls.

The practice of our craftsmen shows that of all available tools, the ax is the most convenient, due to the length of the handle, because. this greatly simplifies the work. If you come across a window made of soft plastic, feel free to use a spatula with a hard handle.

Professional installers of metal-plastic windows, in addition to a puncher and other tools, in order to remove the glazing bead from a plastic window, must have a special hammer and spatula, as well as suction cups.

But buying these devices for installing just a few windows is quite expensive, unless you want to install large windows. In order to remove the bead, we will use an improvised tool - a knife and a hammer.

The blade of the knife should be thick enough and, if possible, without a sharp tip. You can laugh, but the shape of a table knife is very similar to the shape of a spatula for dismantling plastic glazing beads. You can also use a chisel. The main requirement is not to damage the surface plastic window, because you can't color it later.

At work you will need:

screwdriver
putty knife
sharp knife
rubber suction cups
protective gloves

source:
http://prorabsovet.com

If it is necessary not only to remove the double-glazed window from the frame, but also to disassemble it, then proceed with dismantling. Usually a double-glazed window consists of two or three glasses. During manufacture, a moisture absorber is poured into a special frame.

Using a sharp knife, it is necessary to cut the top layer of sealant. All actions must be careful not to damage the glass, because it can crack if the knife is pushed deep.

Carefully remove the sealant layer by layer so you can get to the aluminum frame. At this stage, the disassembly is almost complete. If necessary, repeat all the steps with other window sashes.

But, remember, in order to assemble a double-glazed window, you may need special equipment, so all actions must be deliberate, unhurried, accurate so as not to damage any part of the disassembled window.

Note!

Note that the network is full of proposals for replacing the ax with a wide spatula with a rigid handle. They say it is safer and it is impossible to damage the double-glazed window. Trust us it's a lie clean water. We want to say that a spatula cannot, by definition, always be suitable for these purposes.

It can be suitable in an exceptional case - if we have a soft window profile in front of us, i.e. from soft plastic. However, as we can see, most windows are made of hard plastic.

source: http://www.all-4-home.ru

Part of the design of any plastic window is a double-glazed window.

There are times when it is necessary to disassemble the window for the purpose of repair, adjustment or preventive maintenance.

If this is the first time you have encountered such a problem, then you will have a question “how to remove a double-glazed window?”.

At first glance it seems difficult, but if you follow small instructions and adhere to some rules, it will turn out that this task is so difficult.

To remove the double-glazed window, it is necessary to disassemble the plastic window, dismantle it. To do this, pull out the retaining rod from the upper hinge, then you need to disconnect the window sash from the window opening.

Useful advice!

When doing this, be careful, as the window can be quite heavy. Lower the removed sash to the floor, carefully and securely leaning against the wall.

Engage in the dismantling of window sash fittings. To do this, unscrew the handle, unscrew all the screws. To remove the parts of the locking device, a screwdriver is useful. Fold all removed elements, fasteners and accessories into separate place so as not to lose a single detail.

Insert the tool into the gap between the glazing bead and the window and carefully remove it. Do the same with the rest of the glazing beads.

source:
http://otdelkavnutri.ru

Blind plastic window

If you have a blind plastic window, then sooner or later there may be a reason to remove the double-glazed window, for example, to paint the ebb or slope from the outside, or to repair these very slopes.

To remove the double-glazed window, we need a hammer (wooden or plastic) and a sharp chisel.

In principle, you can use an iron hammer, but you need to be extra careful because. window glass and an iron hammer are poorly compatible - there is a risk of ruining the entire window.

Instruction:

After we have armed ourselves, we need to start removing the glazing bead. A glazing bead is such a long bar along the perimeter of a double-glazed window, this bar holds the double-glazed window.
We insert the chisel between the frame and the glazing bead and with light blows knock out the glazing bead to the center of the double-glazed window. It is better to start with one of the vertical glazing beads, the chisel must be inserted so that the glazing bead is bent and it can be pulled out.
The main thing is to pull out one glazing bead, the rest will be easier. they can be picked up at the corners.
Attention! The top glazing bead should be removed last! After all, the double-glazed window on top, except for it, does not hold on to anything, it can simply fall out on your head.
After the glazing beads have been removed, we take out the double-glazed window and carefully place it against the wall, after which you can deal with slopes with ebbs or whatever you wanted there.
Under the double-glazed windows you will see plastic plates on black or gray inserts, when you reinsert the double-glazed window, do not forget to position them as they were at the beginning.
When you put a double-glazed window into the frame, start hammering in the glazing beads, first the top, then the bottom and then the side ones, it is clear that you should hammer in carefully, this is not a nail and you don’t need much effort here.

We take out the double-glazed window with an ax

How to remove a double-glazed window from a frame - this question torments not a single dozen buyers of plastic windows. Now we will show you how to remove a double-glazed window from a plastic window frame.

Since we will extract with our own hands, then special tools we don't have it in stock, so we'll make it with an axe. We begin to dismantle the double-glazed window.

The first step is to start gently inserting our ax into the opening between the plastic frame and the glazing bead.
Then, with a slight movement of the hands, we must gradually press on the ax handle so that the tip of the ax enters the gap between the frame by about 1-1.5 mm, this will be enough.
Next, we need to slightly turn the handle of the ax and snap off the glazing bead. When you hear a click, don't panic. You did everything right.
Now we need to hook the glazing bead in three or four places in order to completely release it from the grooves of engagement with the frame and remove it.
Let's imagine that we are just standing in front of the window, that is, our eyes are directed to the window opening from the front, then the glazing bead should be inserted into the window frame from the side, moving towards the window.
It is not difficult to assume that we will extract our glazing bead in the same plane. Thus, we absolutely do not need to pull the glazing bead towards us, standing in front of the plastic window, because. it won't do us any good.
You need to get it by shifting in the lateral direction, otherwise it will definitely not come out of the window frame.
Therefore, after our blade is now where it should be, you need to press the ax hard enough and turn its handle to the side.
Do not forget that the ax should go a little deeper and push the bead 1-1.5 mm away from the frame.
It is with this method that the glazing bead is most easily separated from the window frame, especially if we are talking about the first stitch. It is not difficult to guess that it is the first glazing bead that is most difficult to pull out, because. the latches in the frame are quite tight.
Well, now it's up to the small. After we have removed the first glazing bead, our work will boil more actively.

Note that the topmost glazing bead must be removed strictly last, otherwise you risk that the double-glazed window can easily fall out of the window and break. When removing a double-glazed window, be sure to hold it with one hand, or even better, ask a friend for help.

Note!

We draw your precious attention to the fact that the blade must be used as flat as possible (NOT as sharp as possible), and not rounded, as you see in our picture on the left.

In no case should the blade be sharpened like a knife, otherwise it will scratch the edges of the window frame very strongly, leaving behind ugly notches. Therefore, it is necessary to optimally choose from axes something in between. You can not take something too sharp, and something too blunt.

We take out a double-glazed window with a chisel and a hammer

There are many reasons why people need to remove double glazing. Maybe you want to paint the tide, but your window is deaf, and you don’t live on the ground floor at all. Removing a double-glazed window on your own, despite the apparent complexity, is quite realistic.

To do this, stock up on a sharp chisel and a hammer. It is best to take not an iron hammer, but a wooden or plastic one, because it will work iron tools glass is dangerous. However, this is not such a big problem if you are careful not to accidentally damage the glass.

So, you took a chisel and a hammer:

Now you need to remove the glazing bead that holds the double-glazed window. It can be seen along the perimeter of the double-glazed window.
A chisel must be inserted between the frame and the glazing bead.
Now start lightly hitting the chisel to knock the glazing bead into the center of the pane. You should start with a vertical bead.
Insert a chisel into its center so that the glazing bead bends so you can pull it out. Then you need to remove all other glazing beads around the perimeter of the window.
Important! You can insert the chisel already from the edge of the glazing bead, however, the top glazing bead must be removed last, because this way you will control the double-glazed window so that it does not fall on your head.
When the glazing bead is removed, you need to carefully take the double-glazed window and put it against the wall, and move on to repairing or painting the outer slope, low tide, or whatever you want to do.
Under the double-glazed window, you will notice colored plastic plates that lie on inserts of black or gray color when you insert a double-glazed window, then you need to remember to put them in place.
When inserting the double-glazed window back, you should start hammering the glazing bead, but in the reverse order. You put the top bead first, and then the bottom.
After that, put the side glazing beads (due to the greater length, they are easier to bend), only you need to score carefully, which is why I was talking about hammers, since when hammering the glazing bead, the hammer is very close to the glass.

When removing double-glazed windows, do not forget to number all the glazing beads, they will each have to stand in their place, so do not confuse.
During the manufacture of the window, all glazing beads are measured with a ruler according to the location, so if you install the glazing bead in some other place, then it simply will not hold the double-glazed window.
Even if the glazing beads look the same, for example, from above and below, it can still differ in length by at least a few millimeters. Remember that even a difference of 2 mm will be noticeable at the junction of the glazing beads.
When the window frame is installed in the opening, it rests with its entire mass on the bearing pads installed under it. In no case should the dowels take over the entire mass of the window, the window itself is very heavy 120-150 kg, and no bolts in the wall can hold it, in short, support in the form of load-bearing blocks is required during installation.
Blocks should be located at the corners of the frame and at the location vertical partitions(imposts).
When setting the window vertically, use a plumb bob with a sharp tip and axial symmetry. Using a level bar in this case would be a mistake. with its help, accuracy can be measured only conditionally.
When setting the frame horizontally, for the same reason, a water level from a durable and transparent hose is best suited, the principle of its operation is not difficult to find on the Internet. This level is well suited when you need to install several windows at the same height.
It is very important to ensure that water does not enter the central chamber through the mounting holes during installation. In fact, in any profile there is the possibility of water drainage, because. it will still seep through the seal.
But when it comes to the initial installation, water can accumulate in the groove above the center chamber of the frame, and in this chamber is the metal frame.
Because this water got during installation, and not in a natural way, then it can flow into the attachment points of the impost with the frame, or into the holes of the self-tapping screws. All this is very bad. such water can remain in a sealed double-glazed window for a long time.
For prevention, you can drill several holes from the bottom end through which moisture can be removed, but there is nothing good in this. additional holes in the frame are not needed, although this is of course better than freezing.
It is not necessary to tighten the fixing screws too much, if at least one of the screws is pinched, the window may take on a barrel-shaped appearance. Therefore, after fixing the frame, it is necessary to check the window levels again.
After completion of the installation work, it is necessary to remove the protective film, which is located on PVC profile. This must be done immediately after installing the window.
Do not think that if the window is protective film then the window will last you longer, in fact, it is only intended for installation so as not to scratch or stain the profile, and it is not intended for long-term use - the film quickly loses its properties and literally grows together with the profile, after which it will be impossible to peel off.
To get rid of the sealant completely in wooden windows when replacing a double-glazed window, a chisel is needed on the glazing beads, a construction knife is sharp with a wide and not long blade, the skin is larger and the skin is zero.
With a chisel, first roughly remove old sealant, then cut off what remains with a knife, then what remains with a large skin, well, there is almost nothing left there, zero. To make it easier to work with a rough skin, wrap it in wooden block and then the surface will be flat and wide.
Do not hold the glazing bead on weight, as it is fragile and can crack, put it on a comfortable surface so that it does not slip.
When applying a new sealant and inserting a double-glazed window, be sure to degrease the surface of the glazing bead and double-glazed window at the place of application.

In some cases, it is necessary to remove the window from the hinges, for example, to lubricate them, replace the hinges or completely replace the windows.

How to remove a plastic window sash

To change windows or lubricate the hinges, you will need to remove the sashes on the windows. To do this, you need to close the sash and turn the handle to the close position but not completely so that the window is not tightly closed but at the same time it does not open by itself. Remove the protective plastic caps from the hinges by first prying them with a screwdriver from below. The lower cap is removed strictly vertically upwards, and the lower cap horizontally towards the room.

Pull the pin out of the hinge and replace the windows

Then take a flat screwdriver and push down on the pin protruding from the top loop. The pin will come out a little from the bottom, you will need to pry it with a screwdriver and pull it out. When pulling out the pin, it is necessary to support the sash in the area of the upper hinge. When the pin is pulled out, you need to turn the handle to the open position.

window replacement

Then, holding the sash from both sides in the upper part, you need to slightly deviate the sash from the frame and pull it up so that the window sash is removed from the lower pin. After that, plastic windows are replaced or hinges are lubricated.

Video

This video shows how to remove a plastic window to tighten the hinges on plastic windows or completely change plastic windows to new ones.

Hide

Sometimes you have to face the problem of removing a plastic window in order to repair or bring something in. Even if you are going to use dismantling services from some company, it will be useful for you to know how to remove a plastic window simply and with your own hands. This knowledge will not be superfluous, because you can control the process.

Window installation is carried out with removed sashes, then they are mounted in place. Dismantling occurs in the same way, only in reverse order. This procedure will make the window lighter, protect it from damage if you need to remove the entire structure, and protect you from possible injury if the sash is accidentally opened.

In order to dismantle the window correctly, you need to know how to remove the sash from the plastic window. . To do this, you need a simple set of tools:

A hammer.
Pliers.
Several screwdrivers.

To release the sash, you need to open it with the handle, in upper corner find a loop. Using a hammer and a small screwdriver or a medium-sized nail, you need to pull out the pin that holds this loop. After the fastening element has been removed, it will be possible to lift the structural element and remove it.

This procedure is suitable if the window has not yet been installed. The task of how to remove the sash of a plastic window from its hinges is more difficult, since the pin cannot be knocked out: the window opening will interfere. It will become impossible to knock it out from above, since there is little room for maneuver in the presence of a slope. You can try using pliers and pull out this structural element by pulling it down. It’s just not possible to pull it out like that: you need to press down the spindle from above with a flat object. A large screwdriver, a chisel, or another object of a similar shape that can fit in the distance between the loop and the slope will come in handy.

The method of dismantling the double-glazed window

Removing a frame from a plastic window is not as easy as it might seem. The difficulty lies in the fact that it is not possible to get the outer slope.
If this is not possible, and this structural element needs repair, you can try to dismantle the frame. Knowing how to remove a plastic window can be useful if you are going to stick a stained glass film, tint glass, change a double-glazed window. This will help reduce the cost of the work being done.

First of all, before starting work from the window, you need to remove the grid, remove the extra elements that are being removed, including the grilles, if any. If work is carried out on the balcony, you need to clear a place for work. You need to start work by removing the glazing beads holding the double-glazed window. These elements are easily pulled out with a screwdriver, and you can find them around the perimeter of the glass.

Put the numbers on the removed glazing beads. When reinstalling the double-glazed window, they must be installed in their places, otherwise the glass will stand unevenly and will not hold well or fly out.

You need to carefully knock out the bead, the blow is directed towards the center of the glass. You need to start with the elements arranged vertically. The top one is removed last. It is necessary that someone hold the double-glazed window: it can fall after it loses the last support.

Removing the plastic window is also desirable to produce together. This will greatly facilitate the work, allow you to perform it faster and more accurately, without breaking the glass by negligence. After removing the double-glazed window, you can get to the window elements located outside, without pulling out the frame.

Insert glass in reverse order. The top bead is installed first in place, then all the others. The side ones are the longest, it is most convenient to put them last, otherwise you can bend. You can hammer them with a hammer, but it is recommended to use a rubber one so as not to break the double-glazed window.

Removing the glazing bead

Removing from hinges

Knowing how to remove a plastic window from its hinges can be useful if, for example, you need to replace or repair the sash or remove it to dismantle the window. To carry out this procedure, it is necessary to release the hinges from the plastic lining. After that, the sash will need to be slightly opened to ensure convenient access to the loop. You need to start eating from the top lining, then move on to the bottom.

The top loop is taken apart first. You will need to pull the rod out of it with the help of pliers. After that, tilt the sash towards you, remove it from the bottom hinge.

Complete dismantling

If it is not enough just to remove the sash of a plastic window with your own hands, you can try to remove it entirely. If you need the dismantled window to remain intact, it is recommended to hire specialists for this; if the integrity of the double-glazed window does not matter, you can try

We cut through mounting foam

remove it on your own. The difficulty lies in the fact that in the absence of experience, installers very often break themselves window block and its replacement is expensive. There is a risk of dropping the structure onto the street.

For dismantling you will need:

Remove window sashes.
Cut out the frame.
Take it off.
Remove tide.
Remove window sill.

The reader already knows how to remove a plastic window from its hinges and how to remove a plastic window sash. With sawing the frame, things are more complicated. Each cut is made with a hand saw, for this it is better to use a metal file. Please note that the work is dusty, there will be many small particles.

The cuts will help to easily dismantle the frame, after they are made, the structure can be pry off with a crowbar and pulled out. Before this, it is necessary to cut off all the mounting foam that holds the window; if the frame is screwed, you can notice this by opening the sash, the fasteners are first unscrewed. You can try to get the frame without cuts. This is much more difficult, but there is a chance that the structure will remain intact and come in handy for installation somewhere else.

Are you going to change windows and don't know which ones to give preference to? - the best choice, buyers have appreciated them for a long time, read