Types of wall coverings. Endless finishing possibilities: decorative plaster on interior walls

Repair in the apartment implies high-quality and original design all existing surfaces in the room. For this, modern materials are used for wall decoration in the apartment.

Types of finishing materials that are used in the interior

Wall decoration options in modern apartment design are quite diverse (see Wall decoration with MDF panels).

For this are used:

Wallpaper.
Decorative plaster.
Fake diamond.

Ceramics.
PVC panels (see Wall decoration with PVC panels).

Wallpaper in the decoration of the room

Wall decoration, options for using wallpaper are very different due to the difference in the material itself (see Wall decoration in the living room).

Currently used:

Paper.
Non-woven.
Vinyl.

Textile.
Liquid.

All about paper wallpaper, characteristics:

This is the most common type of wall surface design. They are excellent breathable. Therefore, do not use the material in rooms where there is humidity. They also absorb moisture easily. To a greater extent, they perform decorative functions.

Such material has big choice colors and designs. standard width paper wallpaper is 50 cm. Material is produced in rolls 25-50 m long. Paper wallpapers are very light and are used on their surface different types embossing.

Non-woven wallpaper:

This type of wallpaper is a more durable material. It is also made in rolls, only the width in some cases can reach 1-1.20 m. Non-woven wallpaper is moisture resistant, which makes it possible to clean them very simply and easily.

Advice. The surface of such wallpaper can only be cleaned with a damp cloth and do not use abrasive products.

To date, there are two types of non-woven wallpaper:

For painting.
Structural.

Vinyl wallpaper

Vinyl wallpaper is a fairly common option for wall decoration. They are a material on a paper or non-woven base, the protective layer of which is polyvinyl chloride.

This type of wallpaper is also moisture resistant and its surface is not able to absorb dirt. It is easily cleaned with a normal damp cloth. Wallpaper is glued very easily and quickly, as they have different sizes.

On the surface, you can often find embossing elements that give originality to the design of the room. Vinyl wallpaper can be silk-screened. There are some types of them that have a heavy mass. Due to this, they can be used to level the surface if it has not too deep and large defects.

Textile wallpapers

Wallpapers of this type are roll material, the surface of which is the fabric. The material is quite dense and durable (see Cloth wall decoration).

Advice. Textile wallpapers should not be used in rooms where there are different smells and high humidity of air masses, as they absorb unpleasant odors very well.

Textile wallpapers have a variety of designs and types. They stick to the surface quite easily and quickly.

Advice. When using such a finishing material, it is worth considering that the wallpaper is quite dense and in order for the finish to be of high quality, glue is applied to the surface of the wall and to the inside of the wallpaper.

The liquid wallpaper

Liquid wallpaper is a new type of finishing coating, which consists of special mixtures and fabric inclusions. Such material is sold in dry form, and in order to apply it to the surface there is a certain instruction according to which they are bred.

For the installation of such material you will need:

Container for mixing solution.
construction mixer, with which the solution is mixed.
Two spatulas.
Spray fluid.

The principle of applying such wallpaper is very similar to applying plaster. Everything is done in a similar way, only here it is necessary to impose only one layer. In case of damage to the surface, it is necessary to moisten the place, usually with water, and draw with a spatula, and as a result appearance wallpaper updated.

Wallpapering the surface

The process of pasting the surface is quite simple, and you can do it yourself without the involvement of specialists in this field. The most important thing is to properly and properly prepare the surface for such work.

Preparatory work:

It is possible to glue this finishing material only on a flat surface. You can level it with drywall or plaster. Drywall is a more practical material that is mounted on a special profile metal carcass. With plaster more volume, and the whole process is characterized after completion large quantity construction debris and dust.

Advice. If the leveling of the surface must be carried out very quickly and efficiently, then it is better to use drywall.

Be sure each surface must be treated with a primer solution. If it was not at hand, then ordinary wallpaper glue is used instead, with which the pasting process will be carried out. It is applied in a small layer on the surface and wait for complete absorption.

pasting process

For gluing walls you need to use:

Container for mixing adhesive.
Tool for mixing the composition (wooden stick).
Brushes (1 - for applying glue to the wallpaper, 2 - to the surface of the wall).

Foam rollers for leveling wallpaper on the surface.
Dry rag.

Stages of work:

Before cutting off a roll of wallpaper required size strips for the surface, you must first attach the material to the wall and make notes at the top and bottom with a pencil. With the help of scissors, a piece is cut off and smeared with glue. The same actions are carried out on the surface of the wall.

The strip is applied and begins to level from the very top to the bottom, using rollers and rags. All this is also done with other bands.

Advice. As a rule, when wallpapering, quite often there are difficulties with the joints of the material, which are formed as a result of poor-quality coating of the strip. To prevent this from happening, a special paper tape is glued to the surface under each joint, which easily holds the edges of the wallpaper on the surface.

Decorative plaster in wall decoration

Modern wall decoration in an apartment can be done using such an interesting tool as decorative plaster. The main type of plaster has been used for centuries.

Types of decorative plaster:

silicate plaster.
Silicone.
Acrylic.
Mineral.

More about materials:

Silicate plaster is quite strong and durable. It does not absorb dirt and is fairly easy to clean with a damp cloth. Before choosing this type of plaster, it is worth considering that it very easily breaks off the surface with an accidental impact.
Silicone plaster is the most practical. It consists of polymer binders. Its price is quite high. It is easy to apply to the surface due to its elasticity.

The most versatile is acrylic plaster. It is used not only in internal, but also in external works. It is used in any room with any humidity and temperature changes. Its drying process is very fast, which makes it possible to finish the finishing work several times faster.
mineral plaster not very durable. Especially in the case when the walls are constantly exposed to some kind of vibration. It is very easy to crack and crumble from the surface and it is not recommended to use it in decorative work. This is the cheapest remedy.

Advice. The choice of decorative plaster is based on the surface material and the complexity of the work.

How to apply decorative plaster

wall decoration modern materials distinguished by its simplicity and ease of implementation. All this can be said about decorative plaster. For its application, it is necessary to prepare the surface.

Surface preparation:

It is possible to apply decorative plaster only on a flat surface, since the purpose of its application is to decorate the room. To level the surface, drywall, plaster or any other methods are used.

Advice. When choosing a material for leveling the surface, it is worth considering that decorative plaster can only be applied to ordinary plaster.

Therefore, the starting plaster is applied to the surface in several layers (the number of layers depends on the size of the defects on the surface), each of which, after complete drying, is processed with sandpaper.
After the starting plaster, a finishing plaster is applied, which is designed to hide small defects first layer. It is applied according to the same principle as the starting one.

For application conventional plaster you will need:

Building level.
Construction grid.

Two spatulas of different sizes.
Construction mixer for mortar mixing.

Solution container.
Sandpaper.

The process of applying decorative plaster

Making the surface of the wall using decorative plaster is a fairly simple process (see Finishing the corners in the apartment is recommended).

For him you will need:

2 spatulas of medium size.
Sandpaper.
Capacity and construction mixer.

The agent is applied in small layers, it all depends on the type of plaster.

Advice. In any case, the first layer on the surface of decorative plaster should be translucent. It will be the basis for further surface decoration.

The video shows such a process from beginning to end and there is nothing complicated in it, especially if the surface is well prepared.

Wall decoration in the room should not only meet the criteria of beauty, but also be practical. Therefore, for each of the rooms in the apartment, they select the appropriate “clothes”.

There are many options for finishing and design, and every year there are even more of them. They are becoming more and more diverse, there is plenty to choose from. If for walls in rooms that are intended for relaxation, finishing materials are chosen, relying more on their appearance, beauty, then for walls in the kitchen they mainly use more practical materials that can withstand wet cleaning.

No matter how the kitchen is technically equipped: a powerful hood, dishwasher, steam will still be released during cooking, greasy splashes from the stove, drops of water. In addition, how many people - so many tastes. Everyone wants to decorate the interior of the apartment at their own discretion, so that the design is not like any other, to show their individuality. Wall cladding can be very diverse, and there are no strict rules in this matter.

Ceramic tile

Man laying tiles on the wall

Traditionally, tiles are laid in rooms where increased requirements are imposed on the walls for wear resistance, moisture resistance, light cleaning. These are bathrooms, kitchens, utility rooms, industrial premises.

The tile perfectly withstands almost any load, it can be used both in the middle of the premises and outside. There are wall and floor tiles. Under the floor tiles, you can safely install a floor heating system.

The variety of shapes and colors allows you to choose ceramic tiles for any interior. Tile manufacturers produce material in whole series that have a common design.

For example, several options for wall tiles and floor tiles in the same color scheme, but with different textures and patterns. They are additionally produced and decorative elements, various strips, tiles with a pattern, which also have the same color solution. But the choice should be approached carefully and carefully. This material is not so easy to take and change. Wall covering ceramic tiles- the work is "dirty", under the power of an experienced master.

Laying tiles

Before laying, the wall must be marked with a pencil to find out the location of the tiles. For a guide and a base under the first row of the inflow, you need to glue a rail or a plaster beacon (they should be leveled with a level).

A layer of glue is applied to the base with a notched trowel-comb. The tile is carefully applied to the surface and pressed. Before gluing, moisten the product with water. In order to level the tiles, use a rubber mallet that cannot damage outer layer tiles. For correction during laying, special plastic wedges can be used. Each row must be checked by level.

Tip: In order for the seams between all the tiles to be the same, use plastic crosses. They are different sizes: The thicker the cross, the wider the seam will be.

Grouting

After the tile is glued, it should be allowed to dry and fix on the surface. After that, you can start grouting. Grout is dry decorative mixture, which is needed for decorative finishing of seams. It is produced in various colors. It is convenient to rub the seams with a special rubber spatula. Excess grout must be removed immediately with a damp cloth.

And the process described above - look at the video.

Applying stone

Wall covering artificial stone or natural is quite popular today. The procedure for working with stone is approximately the same as when laying tiles. The only difference is that the stone is a heavier material, so you should choose the appropriate glue for gluing it.

The combination of a fireplace and stone in the interior

In addition, if the pieces of stone are large, it is difficult to simply glue them to the surface. Therefore, if the stone plates are overall, then under each plate, from below, in order to ensure the stability of the material, small pegs are driven in, on which the stone tile will rest.

Read more: Puttying drywall for painting: how to do it correctly - proportions, application technology, helpful tips, photo and video works

stone in recent times become an increasingly popular finishing material, but most often it is used in combination with other materials. For example, decorative stone islands are glued on a putty wall, while framing door and window openings with stone. Or in conjunction with wooden surface corners and part of the working wall in the kitchen are trimmed with stone. It also finds application for finishing the facades of buildings, decorative fences, gazebos, fountains.

You can see the stone finish in the video below.

Drywall finishing

Wall cladding with plasterboard is used in the decoration of any type of premises. The popularity is explained by the fact that such sheets are convenient and easy to level any surface.

Man fixing sheets of drywall to the wall

The material is simple and moisture resistant. Moisture-resistant plates are used in rooms where there is high humidity, in bathrooms, kitchens. Gypsum boards are wall, ceiling. For floor apply gypsum fiber materials. ceiling material thinner and lighter, wallboards are thicker.

To decorate or install a rounded surface, there is a special “arched” material that can be bent.

There are two ways to install drywall boards:

On the frame. In this case, a metal or wooden frame. There are special metal profiles for such frameworks. They come in different sizes. For ceiling structure thinner profiles are used, for a wall they are wider and thicker. Before installing the structure, the walls, if they do not have significant damage, do not need to be specially prepared. The main thing is to set the frame evenly. After that, sheets are screwed to the frame using self-tapping screws. If on the wall you plan to strengthen wall cabinets, then during the installation of the frame in the places where the cabinets will be attached, additional metal or wooden slats should be installed. Then furniture should be hung on these rails.
On the adhesive solution. The wall cladding technology in this case is as follows: a special glue for drywall is applied pointwise to the wall. In the people, this method is also called "glue on bloopers." Plasterboard sheets are glued to the mortar and pressed. Each sheet is checked for evenness by level.

Read more: How to treat walls from mold: only working methods

Drywall can then be puttied and painted, you can glue wallpaper, tiles, stone on it. On a plasterboard wall, you can apply various textured plaster.

In general, such a surface most often serves as a basic base for subsequent decorative finishing. In the space between the base and the plasterboard, you can hide communication networks (pipes, electrics).

Installing drywall on the walls is not too complicated. See for yourself.

Variety of panels

Wall cladding with panels - this method of wall decoration is similar in installation method to laying drywall. Careful preparation of the walls is not required, the panels can be installed on the frame.

The difference lies in the fact that drywall is used as a material for leveling walls. After that, drywall should still be finished with others. decorative materials. The panels are initially exterior finish and design. They just need to be installed.

Variety of mdf panels

But the price of such material is much higher than the cost of drywall. Decorative panels can be made from various materials- wood, fiberboard, MDF, plywood, plastic, glass, including a mirror.

The surface of the panels can be matte and glossy, wood-like or with an imitation of another structure. Panels, depending on their strength characteristics, can be installed in almost any room. For the design of corners, transitions, joints, commercially available whole line additional structural elements. Sheets can usually be easily cut to size.

Here are the main options for wall decoration exist - choose the best one.

Wall decoration, like nothing else, affects the interior and general form premises. Therefore, the choice of material should be approached not only from the side of “oh how beautiful it will look”, but also pay attention to practicality. After all, each room has its own functional areas. Let's look at the most popular options for wall decoration in an apartment, the pros, cons and photos.

Wallpaper

Wallpaper is perhaps the most popular option for decorating a room. There are different types of wallpapers: from simple paper to vinyl or even 3D. The material is selected depending on the room. For example, in the kitchen, vinyl (washable wallpaper) is better suited. This is very convenient, because at any time the walls can be cleaned of "soot" and other dirt. And in the bathroom it is better to choose moisture-resistant ones, otherwise the material will absorb moisture, it can peel off and, in addition to everything, a fungus will appear. In the nursery, there are several options for solving the problem: washable and light paper (density up to 110 g / m 3). The first option is more expensive and practical, it will great solution for various "surprises" from the most active family members. It's no secret that children are inventive people, and not all creativity can be corrected. Soon the material will still have to be re-glued. Paper ones are cheaper and here the calculation is that as soon as the wallpaper gets very dirty, they can be easily re-pasted. But this will have to be done an order of magnitude more often than with washable ones. Non-woven, liquid, textile, photo and 3D wallpapers will look great in the living room, and one or another option is selected depending on the design. All the nuances of wall decoration with wallpaper (types, photos, descriptions, how to choose, etc.).

Decorative plaster

For most of us, the phrase "wall plastering" is associated with surface leveling and other rough work. But today decorative plaster is a great solution for original decoration premises. Depending on the type (acrylic, mineral, silicate, etc.), the technical qualities, properties and appearance of the material change. The advantage of plaster is the possibility of applying various patterns, even a few correct strokes with a spatula can give the room original look. The disadvantage is the difficulty in application. All the secrets of plastering.

Tile

The tile is resistant to moisture, temperature changes and other troubles, so it is best suited for the bathroom and kitchen. The disadvantage of the material is the complexity of work and high cost. For example, “cottoforte” tiles will perfectly complement any interior, but at the same time, not everyone can afford the cost of laying them. The interior of the room directly depends on the interior of the material (ceramic, glass, PVC, etc.), each of which has its own characteristics. More about styling, types and other nuances.

Drywall

Drywall is a good option for finishing almost any room.

Most often, PVC panels can be found in offices, shopping malls and other commercial establishments. Since plastic is not a natural material, it is rarely used in a bedroom or living room. But for the kitchen or bathroom plastic panels will be an excellent solution, because they have all the necessary qualities. Moreover, the material is easy to install and in case of damage, any part can be easily replaced. Everything about PVC panels.

Decorative rock

– expensive pleasure. Also, laying it on the wall on your own without the necessary experience is unlikely to succeed. This is perhaps the only drawback of the material. Natural, durable, resistant stone is able to bring originality to the room and emphasize the stateliness of its owners.

Good time of the day! My name is Kirill. In this article I will tell you what types of wall decoration exist. I hope that this article will be useful to you. You can also find a lot of interesting things about repair and decoration, interior design and our services by going to our website. official site.

Walls are an indispensable element in the room. They cannot be replaced even with a strong desire. From this we can conclude that wall decoration should be done very high quality, because it will serve its owner for a long time. Choices must be taken seriously colors, which will complement the overall interior of the room, as well as choose professional teams of craftsmen for finishing and repair work. You can also get acquainted with the prices for the design and decoration of apartments and houses in Moscow and Moscow Region by clicking on this links .

There are several types of wall decoration, each of which can be considered separately.

PAINTING

One of the most economical and simple options in the decoration of the walls is still painting. In addition, it significantly saves time. depending on the texture paintwork can be applied in one or two layers, with a certain stencil pattern, curly and volumetric texture. It is very important to choose the right color scheme, then the room will look more advantageous in the overall interior. Light shades will visually help to increase the space - this can be useful for finishing and repair work in small apartments. Dark shades, on the contrary, will make the room look smaller. When applied to walls, different paints are used. It can be water-based, acrylic or dispersion. Such paints not only give a high-quality result, but also prevent microclimate disturbance and moisture exchange.

WALLPAPER

To date, wallpapering is also a fairly common type of wall decoration. Not required here special efforts or specialized knowledge. The main thing is to do everything with high quality, picking up the elements of the picture, if any. Currently, the stores offer a huge selection of a wide variety of wallpapers.

Standard and most budget - paper wallpaper, which are unlikely to be applied with perfect quality and even overlap. Often there are still some defects.
Non-woven wallpaper is more common. Instead of ordinary paper, a special non-woven substrate is used, consisting of cellulose and synthetic fibers. This type of wallpaper gained its popularity for its convenience and ease of application and subsequent operation. Glue in this case must be applied directly to the wall. Already have finished wallpaper with a pattern, as well as special ones for painting.
One more is enough budget option are glass fiber. Mainly applied in office space followed by painting. They are overlapped, and then cut off the excess.
Quality and an order of magnitude higher in the price category are vinyl wallpapers. Their service life is quite long (some manufacturers claim up to 15 years of service) and allows you to maintain quality for a long time. They are easily washable and various cleaning if necessary, the paint does not fade in the sun. Such wallpapers are quite elastic and dense, which ensures reliability and durability. If you properly prepare the coating and apply the wallpaper, then the effect of the integrity of the canvas will be visually visible.
Another very interesting and modern look wall coverings - liquid wallpaper. This is a special solution that is applied to the surface in liquid form. With it, you can get not only smooth walls, but also a certain relief, and a three-dimensional pattern without any joints or seams. The solution is environmentally friendly, applied and removed without difficulty, keeps the color perfectly and does not fade in the sun. You can use them in almost any room.

CORK COATING

This coating is supplied in rolls or tiles. It is intended exclusively for decoration internal surfaces premises. Basically, manufacturers offer light and dark brown colors, the closest to natural shades. The most important advantages cork is an excellent noise and heat insulation, as well as convenience and ease of application.

DECORATIVE PLASTER

This cover is quite original and modern version finishes. With her help, all repairs will be quick and easy. It is a special coating with texture. It is from the filler of the plaster, as well as the method of application and tools, that the appearance of the coating depends. Decorative plaster has its advantages:

Moisture-resistant, durable coating that does not lose its color and does not fade in the sun;
Environmentally friendly, can be used in children's rooms;
A wide range of colors allows you to use the coating in any interior;
Except decorative look with the help of plaster, you can easily remove small cracks, bumps and other defects;
Resistant to wet cleaning;
It can be applied to any surface - brick, concrete, foam concrete.

CERAMIC TILES

Fairly common and durable look wall coverings. Often used in the repair of bathrooms, toilets and kitchens. The main advantages are aesthetic beauty, practicality, moisture resistance, convenience and ease of care and washing. Shops offer a rich selection of colors, patterns and even textured tiles for any interior. It can be combined with additional elements, for example, curbs.

ARTIFICIAL AND NATURAL STONE

Artificial stone is a special facing material, which looks very similar to the texture of natural stone. It is made from a mixture of sand and cement, as well as other materials with the addition of dyes. Its application is quite wide - from cladding external facades buildings up to interior spaces and living rooms. This is a fairly popular and budget alternative to natural stone finishes, distinguished by its lightness and ease of installation.

Natural stone is also very common, but it has a higher cost. Walls in the decoration of which it is used a natural stone, have a special warm and noble atmosphere. Besides, distinctive feature is the strength to external mechanical and atmospheric influences, durability and high performance. Like artificial, natural stone can be used as a finishing material for the external facades of buildings and for interior decoration premises. A rich selection of different textures and types of stone gives imagination for creativity and the ability to choose the finish for any interior.

PONELI DECORATIVE

Modern finishing technologies provide another type of finishing material for walls - decorative panels. They are a great solution for kitchens, bathrooms or bathrooms. Rich color range and different kinds textures allow you to choose the necessary panels for any interior. In addition, their use will greatly speed up the entire repair process, and subsequently greatly simplify maintenance and operation. The panels can perfectly hide any wall irregularities and other existing defects. On sale you can find this type of finish from a wide variety of materials: plastic, drywall, cork, chipboard / fiberboard, wood and others.

I told you about the main types of wall decoration. More clearly you can see some types of walls made by our craftsmen in our portfolio .

Thank you for your attention! Sincerely, Cyril!

The final stage of the repair of your apartment is the finishing of all its surfaces. And, as we know from practice, this is one of its main stages. And it is at this stage self repair a rather difficult problem arises in solving the question of the correct do-it-yourself decorative wall decoration. The reason for self-repair for each may be different for some it is a financial issue, while for others it is a simple desire to do at least something on their own in their home.

What are the types of finishing works

To date, the market building materials offers its customers a wide range of finishing materials and furniture, variations of which you can choose and buy in the store https://decor-group.com.ua, which are used for finishing both internal and external walls of apartments or houses. Sometimes the choice is so large that it leads to confusion for inexperienced consumers. Therefore, you need to determine exactly what you would like to see in the end result of the repair. Do right choice maybe not everyone is why the profession of a designer has become so popular, which will help you with the choice of materials for wall decoration in the apartment.

decorative trim directly depends on the type and type of finishing material that will be used in the repair. Therefore, having dealt with separately, with each finishing material and the method of its application or laying on the surface, it will become the answer to the question posed - the type of decorative wall decoration. And so we proceed to the finishing materials.

Paint as a facing material

First of all, we will consider this material because of its frequency of use as a finishing material. Nowadays, it is one of the main finishing materials. It has gained such popularity due to its variety of species, types and categories. But the main paints include only two types of paints:

Acrylic paint - this type includes water-based and water-dispersion (paint on water based) paint. They are used to decorate walls in almost any intended purpose;
Alkyd paint - its use is a little less common, but this type is also considered an excellent material for decorative wall decoration. This species includes enamel and oil paints. The process of applying such paints is quite simple, the only condition is a smooth and perfectly flat surface.

Wallpaper as a finishing material

Due to their variety and ease of finishing, they are the most common finishing material used for interior cladding room walls. Thanks to the variety of this material, it is possible to create the most unusual design of the room. If you skillfully combine wallpapers that are different in texture, color and structure, you can create an original, glamorous or classic design. The main and most common types of wallpaper:

Paper wallpaper;
Vinyl wallpapers;
non-woven wallpaper;
Washable wallpaper;
Bamboo wallpaper;
Cork wallpaper;
The liquid wallpaper.

Most of these types are very easy to work with and the requirements for working with them are about the same as when using paint. But there are also types that are even easier to apply and do not require additional surface treatment, such as vinyl, cork, bamboo or liquid, which are simply applied to a primed surface and even help to hide small bumps and defects on the walls.

Plastic and decorative MDF panel as a finishing material

This is probably the simplest and most economical type of surface finish that does not need pretreatment and surface preparation. It is worth noting not only the ease of operation, but also the speed of execution. installation work. To lay panels of this kind, you need to mount a frame or crate, on which the finishing material will be mounted. And in some cases, when the wall surface has sufficient evenness, it is possible to mount such panels simply to the wall, without resorting to additional installation of a frame or crate. Thanks to this, it is possible to significantly save on finishing work, which cannot be said about decorative plaster.

Plaster as a finishing material

As we have already said, the use of decorative plaster is not a cheap pleasure. It is also worth noting that the process of applying decorative plaster is long and laborious. But despite even this, it is possible to independently carry out this process. This is within the power of almost everyone, even with even minimal skills in working with the tool. It is enough just to practice and having finished only a couple of meters of the surface with decorative plaster, you will feel how the level appears.

It is important to choose the right type of decorative plaster so that it fits exactly into the overall concept of the room. In the process, you will understand what? and where?

Painting as a type of wall decoration

The most famous and ancient method of wall decoration, used back in the days of the first representatives of mankind, is wall painting . But many owners who are independently engaged in finishing work are immediately repelled by this method, and not only because they do not know how to draw, but even because they pick up fantasies. This is understandable because whatever you draw will remain there for a long time.

But today this is not a problem either, since the Internet is replete with a variety of drawings, sketches and compositions among which everyone can choose exactly what he needs or suits him. And at the same time, shops provide a variety of stencils, paints and brushes for this work. And many Internet sites provide free video tutorials on teaching the art of drawing. wall paintings. The main thing is a great desire.

Thanks to this variety of finishing materials offered by the modern construction market, it became possible to create a variety of, and even extravagant, interior designs.

One of the most common ways to decorate walls is to apply decorative plaster. That is why we bring to your attention a useful video called:

Decorative plaster Versazhel - Master class

Also, for those who are really interested decoration walls we advise you to watch a video master class called: