Requirements for a 5th category locksmith. Job responsibilities of a repairman

Job description repairman (RB and RF) establishes the basic requirements for mechanical assembly mechanics working on conveyors and stationary stands for the assembly of turbogenerators, hydrogenerators, electrical machines (DC, synchronous, asynchronous) using manual, electric, pneumatic tools, pneumatic presses, hydraulic brackets, presses that use lifting equipment in their work.

Technological process of mechanical assembly work

The job description of a repairman establishes technological process mechanical assembly work depending on the type of product and includes the following operations:

• collapsible connections;
• permanent connections (pressing, gluing, welding, soldering);
• tests for dielectric strength, tightness, etc.

The following equipment and tools are used:

• assembly tables and stands;
• assembly conveyors;
• hydraulic presses and clamps;
• pneumatic presses;
• oil baths;
• furnaces and electric induction heaters;
• electric welding equipment;
• equipment for tinning and soldering;
• grinding machines;
• test equipment;
• lifting equipment and mechanisms;
• (electric drills, electric screwdrivers, grinding machines and etc.);
• pneumatic tools (pneumatic impact wrenches, pneumatic hammers, etc.);
• hammers, sledgehammers, files, chisels, chisels, awls, screwdrivers, chisels, cores, machine vices, needle nose pliers, round nose pliers, etc.

There is a separate job description for stokers. A boiler room repairman is required to additionally perform the following job duties:

• service water heating and steam boilers, operating on solid fuel;
• switch feed lines;
• fill steam lines;
• turn on automatic boiler power supply equipment;
• carry out preventive inspection of devices;
• Receive boilers from repair and prepare them for operation.

Precautionary measures

The job description of a repairman establishes the need to take precautions at work and on the territory of enterprises when moving in workshops in work area, before starting work, when checking the readiness for operation of the conveyor and stands for the compilation of mechanisms and machines, mechanical assembly devices, including:

• machines and mechanisms, moving and rotating parts of mechanisms, technical means, devices, systems, equipment, conveyors, stands;
• products, moving workpieces, materials, cargo;
• tools, devices, equipment, products, blanks, materials, moving loads, pneumatic tools, power tools;
• fragments and parts of instruments;
• sharp edges and roughness on the surfaces of workpieces, parts, units of machinery, equipment and various technical means (devices), equipment, mechanisms, machines, tools;
• increased dust content in the working area of ​​the surfaces of mechanisms, equipment, technical means, devices, systems;
• increased level of static electricity;
• toxic, chemical, carcinogenic and gastrointestinal irritant substances.

Safety requirements before starting work

A typical job description for a repairman prescribes:

When continuous operation changes are accepted on the basis of entries made in the shift log, which indicate violations of the operating mode of the technological process, if any. The shift log must be signed by the shift foreman.

Before starting work, put your overalls in order. Sprinkle the floor with sand or sawdust, then collect it.

Check the serviceability of ladders, ladders, stands.

Make sure that the lighting (general or local) provides clear visibility of the divisions on the instrumentation.

Check the serviceability of electrical protective equipment.

Work with pneumatic tools that are certified.

Check the functionality of the gripping devices.

Check the quality of threaded surfaces on rhyme bolts and other devices intended for lifting parts during transportation.

Check the serviceability of equipment (sharpening machines, heating baths, furnaces, presses, etc.).

Check the presence of fences and their serviceability, reliability of fastening.

Make sure that the system exhaust ventilation works.

Make sure that primary fire extinguishing equipment is available.

Check protective grounding(zeroing) in order to identify visible damage.

The availability of raw materials, blanks, and semi-finished products is checked in accordance with the purchase order, and their quality is checked according to the assessment of the technical control department.

Features of handling mechanical tools

The job description of a 5th category repairman prescribes:

Use the correct tool.

Securely secure tools and workpieces when processing them.

Containing materials, workpieces and parts in a manner that ensures their stability.

Do not keep in work area foreign objects, which are not used when processing parts.

Stop work if the tool becomes dull (sharpen or replace it).

Remove equipment and portable lamps from electrical outlets if you need to leave. workplace.

Do not stop rotating parts or tools with your hands.

Safety requirements when working with electrified tools

The job description of a repairman when working with an electrified tool is to be careful not to grab clothes and injure your hands. When working with such a tool, you can only use proven electrical protective equipment: gloves, galoshes.

Work related to electrical tests with voltages above 42 V must be performed only if you have completed training, certification and have the appropriate certificate.

Pneumatic tool

The job description of a 6th category repairman requires removal and installation of the product during pressing and testing of units on pneumatic presses only when the rod is completely stationary.

Place parts and components in special containers. When storing on the floor, ensure the stability of the stack. The height of the latter should be no more than 1 m.

Mechanical assembly work

The job description of a repairman when performing mechanical assembly work prohibits:

• work with loose large parts;
• Unloading work should not be carried out under the guidance of a responsible person (foreman, foreman, shift engineer, etc.)

During loading, unloading and transport operations, faulty mechanisms, devices, equipment and containers must not be used to secure cargo. Rigging and rafter work perform if you have undergone special training and have a certificate.

I APPROVED

Director

_____________(_____________)

"____"_____________200____ g.

OPERATING INSTRUCTIONS

For a repairman

(5th category)

1. General Provisions

1.1. A repairman is hired and dismissed from work by order of the director of the enterprise on the recommendation of the chief engineer.

1.2. The repairman reports directly to the chief engineer.

1.3. In his activities, a repairman is guided by:

Charter of the enterprise;

Labor regulations;

Orders and instructions of the director of the enterprise (direct manager);

These operating instructions.

1.4. A repairman must know:

· design features repaired equipment, units and machines; technical specifications for repair, assembly, testing and regulation and for the correct installation of equipment, units and machines;

· technological process of repair, assembly and installation of equipment;

· rules for testing equipment for static and dynamic balancing of machines;

· geometric constructions with complex markings;

· methods for determining premature wear of parts;

· methods of restoring and strengthening worn parts and applying protective coating;

· internal labor regulations.

2. Characteristics of work.

The repairman is tasked with:

2.1. Repair, installation, dismantling, testing, adjustment and adjustment of complex equipment, units and machines and delivery after repair.

2.2. Metalworking of parts and assemblies according to 6–7 qualifications.

2.3. Disassembly, repair and assembly of components and equipment in conditions of intense and dense landings.

4. Apparatuses, gas pipelines high pressure– inspection, repair and testing.

5. Complex film projection devices and developing machines - average repair.

6. Oxygen and argon equipment for open hearth furnaces - repair, maintenance.

7. Gas blowers – major renovation and tests.

8. Vacuum drying and ironing rollers – repair and adjustment.

9. Gearboxes of semi-automatic lathes – assembly and switching with mutual fitting of splined rollers and gears.

10. Oxygen booster compressors – major repairs.

11. Lifting machines – repair, adjustment and leveling of crane tracks.

12. Machines for sorting letters - repair.

13. Charging machines for open hearth furnaces – complete renovation with replacement of the shaft, adjustment of all mechanisms.

14. Loading machines - revision of the movement and rotation mechanism, disassembly, assembly, alignment and replacement of parts.

15. Automated washing machines – repair and adjustment.

16. Mills, screens, drying drums - overhaul, testing, adjustment and delivery.

17. Hydraulic feed mechanisms of metalworking machines - repair and adjustment.

18. Hydraulic drive mechanisms of machine tools - repair, assembly, adjustment.

19. Vacuum and fore-vacuum pumps – major repairs.

20. Blast furnaces - installation of an inclined bridge.

21. Reactors - repair.

22. Gearboxes for rotary kiln cranes and differential gearboxes for rolling mills - inspection, repair.

23. Robots and manipulators with program control with a repair complexity category of up to 20 units. – major repairs, adjustment.

24. Deep drilling rigs - repair.

25. Gear grinding, gear shaping, gear planing machines with complex curved guides - checking for accuracy.

26. Computer controlled machines - testing for rigidity.

27. Volumetric turbodrills, geared, jet-turbine, high-torque, with precision casting turbines - repair, assembly, installation, regulation, testing.

28. Vacuum evaporation units - disassembly, repair, assembly.

29. Cylinders, main and connecting rod bearings - check after running in and final fastening of all connections.

30. Economizers, steam superheaters, compressor and blower units - major repairs, delivery after testing.

31. Electric and ore-smelting furnaces - checking the alignment of the lifting screws, conveyor and fit of the furnace body on all four columns.

3. Responsibilities

· performs assigned work in a timely and high-quality manner;

takes place in in the prescribed manner periodic medical examinations;

· undergoes instructions on labor protection in accordance with the established procedure;

wears special clothes

· prepares the workplace and personal protective equipment;

· checks the serviceability of equipment, devices, tools;

· complies with the requirements of personal hygiene and industrial sanitation;

· complies with the rules of use technological equipment, devices and tools, methods and techniques for safe work;

· immediately notifies the immediate supervisor of any deficiencies discovered during work;

· provides first (pre-medical) aid to victims of injury, poisoning, emergency situations and in case of sudden illness;

4. Responsibility

3.1. The repairman is subject to disciplinary action in accordance with current legislation.

3.2. The repairman bears financial responsibility for failure to ensure the safety of the material assets entrusted to him. The Employer is liable for damage caused to the employer within the limits determined by the current labor, criminal and civil legislation of the Republic of Belarus.

_____________________

I have read the Instructions: _________ _____________________

(signature) (signature decryption)

Russian Federation Sample documents and reporting forms

Manufacturing instructions for a repairman

set bookmark

set bookmark

This production instruction for a repairman was developed on the basis of the Unified Tariff and Qualification Directory (ETKS N 2, part 2), Safety Rules when working with tools and devices RD 34.03.204.

1. GENERAL REQUIREMENTS

1.1. A repairman is a worker and reports directly to the foreman (the head of the business department, or the head of the technical department, or the head of the construction department).

1.2. The repairman must perform his duties in accordance with the requirements of these Instructions.

1.3. A person with secondary education and appropriate training in the specialty is appointed to the position of repairman.

1.4. A repairman must know:

installation of repaired equipment, units and machines;

rules for regulating machines;

methods for eliminating defects during repair, assembly and testing of equipment, units and machines;

device, purpose and rules of use of the control and measuring instruments used;

design of universal and special devices;

methods for marking and processing simple various parts;

system of admissions and landings;

qualities and roughness parameters;

properties of acid-resistant and other alloys;

basic provisions for scheduled preventive maintenance of equipment;

design features of the equipment, units and machines being repaired;

technical conditions for repair, assembly, testing and regulation and for the correct installation of equipment, units and machines;

technological process of repair, assembly and installation of equipment;

rules for testing equipment for static and dynamic balancing of machines;

geometric constructions with complex markings; methods for determining premature wear of parts;

methods for restoring and strengthening worn parts and applying a protective coating.

1.5. A repairman is appointed and dismissed by order of the head of the institution in accordance with the current legislation of the Russian Federation.

1.6. Persons at least 18 years of age who have completed training are allowed to work as a repairman. medical examination, theoretical and practical training, testing knowledge of labor safety requirements in the prescribed manner and receiving permission to work independently.

1.7. The repairman is provided with special clothing and safety footwear in accordance with current standards.

1.8. A repairman must know and strictly comply with labor safety requirements, fire safety, industrial sanitation.

1.9. The repairman must:

comply with internal labor regulations and the established work and rest schedule;

perform work that is part of his duties or assigned by the administration, provided that he is trained in the rules for the safe performance of this work;

apply safe work practices;

be able to provide first aid to victims.

2. RESPONSIBILITIES

Before starting work, a repairman must:

2.1. Check your workplace: the presence of uniform lighting, absence of clutter with foreign objects.

2.2. Check the serviceability of plumbing tools and devices and make sure that their condition complies with labor safety requirements.

2.3. When receiving power tools and hand-held electric machines, check:

serviceability of the cable (cord), its protective tube, plug, insulating parts of the case, handle, brush holder covers, presence and serviceability of protective covers;

clear operation of the switch;

idling operation.

2.4. Check the serviceability of portable ladders.

2.5. Before carrying out repairs on the equipment, make sure that it is stopped and disconnected from the electrical network.

2.6. When using a portable lamp, check: the presence of a protective mesh, the serviceability of the cord and insulating tube, the serviceability of the socket and plug. Voltage portable lamps should not be higher than 42 V.

2.7. While working, the repairman is obliged to:

start work on repairing equipment only after disconnecting it from all types of energy;

at manual cutting using a hacksaw to use safe working techniques;

When cutting metal with a chisel, wear safety glasses;

When using a screwdriver, firmly secure the part in a vice, do not hold it in your hand;

When straightening metal, wear gloves;

Place the removed components and parts stably on wooden supports;

when disassembling press connections, use special pullers;

removal and installation of heavy parts of equipment should be carried out using lifting mechanisms;

wash parts with kerosene in a special container;

work using ladder perform together

to perform work at height, in the absence of stationary platforms, use mobile platforms, stepladders, and follow the requirements of the labor protection instructions when carrying out work at height.

2.8. During work, a repairman is prohibited from:

when doing work wrenches expand them with pipes, other keys, use keys large sizes with placing metal plates between the edges of bolts or nuts and the jaws of the wrench;

when working on scaffolding and scaffolding, allow them to be overloaded with materials, parts, and tools;

leave equipment parts loose even during a short break in work;

performing work with power tools and pneumatic tools, carrying out hot work from a ladder;

eat, smoke, have extraneous conversations.

2.9. Repairman at the end of the working day:

puts his workplace in order;

puts tools and equipment in the designated place;

personal protective equipment used during work is located in places intended for these purposes.

3. RESPONSIBILITY

The repairman is responsible for:

3.1. Timely and high-quality implementation of assigned duties.

3.2. Organization of their work, timely and qualified execution of orders, instructions and instructions from management, regulations on their activities.

3.3. Compliance with the rules internal regulations, fire safety And Traffic rules of the Russian Federation.

3.4. Maintaining documentation required by current regulations.

3.5. Promptly taking measures, including timely informing management, to eliminate violations of safety regulations, fire safety and other rules that pose a threat to the activities of the institution, its employees and other persons.

3.6. For violation of labor discipline, legislative and regulatory acts, a repairman may be subject to disciplinary, material, administrative and criminal liability in accordance with current legislation, depending on the severity of the offense.

4. RIGHTS

A repairman has the right:

4.1. Receive from enterprise employees the information necessary to carry out their activities.

4.2. Use information materials and regulatory documents necessary to perform your job duties.

4.3. Pass certification in the prescribed manner with the right to receive the appropriate qualification category.

4.4. Request and receive necessary materials and documents related to his activities and the activities of his subordinate employees.

4.5. Interact with other services of the enterprise on production and other issues included in its functional responsibilities.

4.6. Enjoy all labor rights in accordance with the Labor Code of the Russian Federation.

5. FINAL PROVISIONS

5.1. An employee is familiarized with this instruction upon acceptance (transfer) to work in the profession for which the instruction has been developed.

5.2. The fact that the employee has familiarized himself with these instructions is confirmed by a signature on the familiarization sheet, which is an integral part of the instructions kept by the employer.

I CONFIRM:

________________________

[Job title]

________________________

________________________

[Name of company]

________________/[FULL NAME.]/

"____" ____________ 20__

JOB DESCRIPTION

Repairman 5th category

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of a 5th category repairman [Name of organization in genitive case] (hereinafter referred to as the Company).

1.2. A repairman of the 5th category is appointed to the position and dismissed from the position in the manner established by the current labor legislation by order of the head of the Company.

1.3. A 5th category repairman belongs to the category of workers and reports to [name of the position of the immediate supervisor in dative case] Companies:

• Deputy Head for ACh,
• Deputy Head of Technology,
• Deputy Head of Construction,
• head of the economic department,
• head of the technical department,
• head of the construction department.

1.4. A person with secondary education and appropriate training in the specialty is appointed to the position of repairman of the 5th category, without presenting requirements for work experience.

1.5. A 5th category repairman must know:

• design features of the equipment, units and machines being repaired;
• technical conditions for repair, assembly, testing and regulation and for the correct installation of equipment, units and machines;
• technological process of repair, assembly and installation of equipment;
• rules for testing equipment for static and dynamic balancing of machines;
• geometric constructions with complex markings;
• methods for determining premature wear of parts;
• methods for restoring and strengthening worn parts and applying a protective coating.

1.6. In his activities, a 5th category repairman is guided by:

• regulations and teaching materials regarding the work being performed;
• internal labor regulations;
• orders and instructions of the head of the Company and immediate supervisor;
• this job description;
• rules on occupational health, safety, industrial sanitation and fire protection.

1.7. During the period of temporary absence of a 5th category repairman, his duties are assigned to [deputy position title].

2. Functional responsibilities

A 5th category repairman is required to perform the following labor functions:

2.1. Repair, installation, dismantling, testing, regulation and adjustment of complex equipment, units and machines and delivery after repair.

2.2. Mechanical processing of parts and assemblies according to 6-7 qualifications.

2.3. Disassembly, repair and assembly of components and equipment in conditions of intense and dense landings.

3. Rights

A 5th category repairman has the right to:

3.1. Give instructions and tasks to his subordinate employees on a range of issues included in his functional responsibilities.

3.2. Monitor the implementation of production tasks, timely execution of individual assignments by employees subordinate to him.

3.3. Request and receive the necessary materials and documents related to issues of his activities and the activities of his subordinate employees.

3.4. Interact with other services of the enterprise on production and other issues included in its functional responsibilities.

3.5. Get acquainted with draft decisions of the enterprise management concerning the activities of the Division.

3.6. Submit proposals for improvement of work related to the responsibilities provided for in this Job Description for the manager’s consideration.

3.7. Submit for consideration by the manager proposals on rewarding distinguished employees and imposing penalties on violators of production and labor discipline.

3.8. Report to the manager about all identified violations and shortcomings in connection with the work performed.

4. Responsibility and performance evaluation

A 5th category repairman bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation, criminal) responsibility for:

4.1.1. Failure to carry out or improperly carry out official instructions from the immediate supervisor.

4.1.2. Failure to perform or improper performance of one's job functions and assigned tasks.

4.1.3. Illegal use of granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work assigned to him.

4.1.5. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to ensure compliance with labor discipline.

4.2. The assessment of the work of a 5th category repairman is carried out:

4.2.1. By the immediate supervisor - regularly, in the course of the employee’s daily performance of his labor functions.

4.2.2. The certification commission of the enterprise - periodically, but at least once every two years, based on documented results of work for the evaluation period.

4.3. The main criterion for assessing the work of a 5th category repairman is the quality, completeness and timeliness of his performance of the tasks provided for in these instructions.

5. Working conditions

5.1. The work schedule of a 5th category repairman is determined in accordance with the internal labor regulations established by the Company.

5.2. Due to production needs, a 5th category repairman can go on business trips (including local ones).

I have read the instructions on ___________/___________/“____” _______ 20__.

1.1. A 5th category repairman is a worker and reports directly to ……… (name of position/profession of the manager)

1.2. To work as a 5th category repairman, a person who has mastered educational programs average vocational education- training programs for skilled workers, basic vocational training programs - vocational training programs for workers' professions, retraining programs for workers, advanced training programs for workers.

1.3. It is not allowed for a 5th category repairman to perform work at a height of 1.3 m.

1.4. A 5th category repairman must know:

1) documents, objects, methods and techniques for performing lower-skilled work, provided for by production (professional) instructions and (or) professional standard;

2) requirements for the layout and equipment of the workplace;

3) rules for reading drawings;

4) purpose, design of universal devices and rules for the use of plumbing and instrumentation;

5) the design and principles of operation of the serviced components and mechanisms, equipment, units and machines;

6) basic technical data and characteristics of components and mechanisms, equipment, units and machines;

7) technological sequence of operations during diagnostics and control technical condition units and mechanisms, equipment, units and machines of average complexity;

8) technological sequence of operations when performing:

Fastening works;

Adjustment work;

Lubrication works;

9) methods for diagnosing performance characteristics complex nodes and mechanisms, equipment, units and machines;

10) methods of execution:

Fastening works;

Adjustment work;

Lubrication works;

11) rules and sequence of execution operations:

Disassembly and assembly of assembly units of complex components and mechanisms;

Replacement of complex components and mechanisms;

Adjustment of complex components and mechanisms;

Adjustments of complex components and mechanisms;

12) methods for diagnosing the technical condition of complex components and mechanisms;

13) special operational requirements to assembly units;

14) requirements for technical documentation of complex components and mechanisms;

15) rules for operating equipment, units and machines to maintain basic parameters and technical characteristics;

16) frequency and maintenance schedules for complex equipment, units and machines;

17) rules and procedure for preparing technical documentation for renovation work during maintenance;

18) methods and means of quality control of work performed;

19) basic mechanical properties processed materials;

20) typical defects during metalworking, the reasons for their occurrence and methods of prevention;

21) methods for eliminating defects during metalworking;

22) dimensional processing methods complex parts;

23) methods and sequence of fitting operations for metalworking of complex parts;

24) the main types and causes of defects during machining, methods of prevention and elimination;

25) signs symbol tolerances, qualities, roughness parameters, methods of basing workpieces;

26) general information about the system of tolerances and landings, grades and roughness parameters by grade;

27) principles of operation of grinding, table-drilling and sharpening machines;

28) technological process machining on grinding, table-drilling and sharpening machines;

29) purpose, rules and conditions of use of the most common clamping devices, measuring and cutting tools for carrying out mechanical processing of parts on grinding, table-top drilling and sharpening machines;

30) types and purpose of hand and mechanized tools;

31) purpose, design and rules for using control and measuring instruments;

32) rules and sequence of measurements;

33) methods and methods of quality control:

Mechanical processing;

Metalworking;

34) labor protection requirements during the maintenance of complex equipment, units and machines;

35) labor protection requirements when performing:

Work on grinding, benchtop drilling and sharpening machines;

Locksmith work;

Installation and dismantling works;

36) ……… (other requirements for necessary knowledge)

1.5. A 5th category repairman must be able to:

1) perform work (operations, actions) at lower levels;

2) maintain the condition of the workplace in accordance with labor protection, fire, industrial and environmental safety, rules for organizing a mechanic’s workplace when:

Maintenance;

Metalworking;

4) disconnect and de-energize complex components and mechanisms, equipment, units and machines;

5) produce:

Visual inspection of wear of components and mechanisms;

Measurements using instrumentation;

Fastening works;

Adjustment work;

Lubrication works;

6) draw up technical documentation for repair work during maintenance;

7) draw up defective statements for the repair of complex equipment, units and machines;

8) prepare assembly units for installation and dismantling work;

9) disassemble and reassemble assembly units, replace complex components and mechanisms;

10) carry out adjustment and adjustment of complex components and mechanisms;

11) choose metalworking and mechanized tools and devices when performing installation and dismantling work, for metalworking of complex parts;

12) make simple devices for installation and dismantling work;

13) make measurements using control and measuring instruments;

14) determine inter-operational allowances and tolerances for inter-operational dimensions;

15) make markings in accordance with the required technological sequence;

16) carry out chopping, straightening, bending, cutting, filing, drilling, countersinking, countersinking, and deployment of complex parts in accordance with the required technological sequence;

17) perform scraping, sawing, fitting and fitting, lapping, finishing, polishing;

18) determine the dimensions of parts and assemblies as universal and specialized measuring instruments in accordance with technical documentation;

19) check the compliance of complex parts and assemblies and auxiliary materials with the requirements of technical documentation (maps);

20) install and secure parts and assemblies in clamping devices of various types;

21) select and prepare for work cutting and control and measuring tools depending on the material being processed;

22) install optimal mode processing in accordance with the technological map;

23) manage:

Peeling machine;

Bench-top drilling machine;

Sharpening machine;

24) carry out processing in accordance with the technological route;

25) control the quality of work performed when:

Metalworking of complex parts using control and measuring tools;

Maintenance of complex equipment, units and machines, installation and dismantling work;

Mechanical processing of parts using control and measuring tools;

26) carry out Maintenance complex equipment, units and machines in compliance with labor protection requirements;

27) do:

Work on grinding, benchtop drilling and sharpening machines in compliance with labor protection requirements;

Installation and dismantling work in compliance with labor protection requirements;

Metalworking in compliance with labor protection requirements;

28) ……… (other requirements for necessary skills)

1.6. ……… (other general provisions)

2. Labor functions

2.1. The labor functions of a 5th category repairman are:

2.1.1. Maintenance and repair of complex parts, assemblies and mechanisms, equipment, units and machines:

1) maintenance of complex components and mechanisms, equipment, units and machines;

2) installation and dismantling of complex components and mechanisms;

3) metalworking of complex parts;

4) mechanical processing of complex parts and assemblies.

2.1.2. Management of repairmen of lower qualifications (category).

2.2. ……… (other functions)

3. Responsibilities

3.1. Before the start of the working day (shift), a 5th category repairman:

1) undergoes a pre-shift (preventive) medical examination in accordance with the established procedure;

2) receives a production task;

3) if necessary, undergoes training on labor protection;

4) takes over the shift;

5) checks the serviceability of devices, tools, equipment, etc., personal protective equipment;

6) ……… (other duties)

3.2. In the process of work, a repairman of the 5th category:

1) performs the work for which he has been instructed and authorized to work;

2) uses special clothing, safety shoes and other personal protective equipment;

3) receives instructions from the immediate supervisor on the performance of the task, safe techniques and methods of work;

4) complies with the rules for using technological equipment, devices and tools, methods and techniques for performing work safely;

5) immediately notify the immediate supervisor of all deficiencies discovered during work;

6) complies with the requirements of personal hygiene and industrial sanitation;

7) ……… (other duties)

3.3. During the working day (shift), a 5th category repairman performs the following duties as part of his job functions:

3.3.1. Within the framework of the labor function specified in subparagraph 1 of paragraph 2.1.1 of these instructions:

2) analyzes the initial data (technical documentation, unit, mechanism);

3) carries out diagnostics of the technical condition of complex components and mechanisms, equipment, units and machines;

4) performs adjustments of complex components and mechanisms, equipment, units and machines;

5) performs lubrication work;

6) determines violations in the operation of complex components and mechanisms, equipment, units and machines;

3.3.2. Within the framework of the labor function specified in subparagraph 2 of paragraph 2.1.1 of these instructions:

1) carries out preparatory and final operations and operations to maintain the workplace;

2) analyzes the initial data (technical documentation, components and mechanisms);

3) carries out diagnostics of the technical condition of complex components and mechanisms;

4) assembles and disassembles assembly units of complex components and mechanisms;

5) replaces complex components and mechanisms;

6) performs adjustments of complex components and mechanisms;

7) exercises control over the quality of work performed.

3.3.3. Within the framework of the labor function specified in subparagraph 3 of paragraph 2.1.1 of this instruction:

1) carries out preparatory and final operations and operations to maintain the workplace;

2) analyzes the source data (technical documentation, part);

3) performs dimensional processing of complex parts;

4) carries out fitting operations in metalworking of complex parts;

3.3.4. Within the framework of the labor function specified in subparagraph 4 of paragraph 2.1.1 of these instructions:

1) carries out preparatory and final operations and operations to maintain the workplace;

2) analyzes the initial data (technical documentation, part, assembly) to conduct the technological process of machining complex parts and assemblies;

3) prepares the machine for machining complex parts and assemblies;

4) carries out the technological process of machining complex parts and assemblies;

5) exercises control over the quality of work performed.

3.3.5. Within the framework of the labor function specified in paragraph 2.1.2 of this instruction:

1) issues shift assignments to repairmen of lower qualifications (grade);

2) organizes and coordinates the work of repairmen of lower qualifications (category);

3) gives instructions and explanations on the performance of work to repairmen of lower qualifications (category);

4) carries out quality control of work performed by repairmen of lower qualifications (grade).

3.4. At the end of the working day (shift), the repairman:

1) puts devices and tools in proper condition and transfers them for storage;

2) removes dirt from workwear and safety shoes, if necessary, places them for drying and storage;

3) submits established reports;

4) performs an inspection (self-examination);

5) hands over a shift;

6) ……… (other duties)

4. Rights

4.1. When performing his labor functions and duties, a 5th category repairman has labor rights provided for in the agreement concluded with the employee employment contract, Internal labor regulations, local regulations, Labor Code Russian Federation and other acts of labor legislation.

4.2. ……… (other provisions on employee rights)

5. Responsibility

5.1. A repairman of the 5th category is subject to disciplinary liability in accordance with Art. 192 Labor Code Russian Federation for improper performance through his fault of the duties listed in this instruction.

5.2. A repairman of the 5th category carries financial liability for ensuring the safety of inventory items entrusted to him.

5.3. A repairman of the 5th category for committing offenses in the course of his activities, depending on their nature and consequences, is subject to civil, administrative and criminal liability in the manner prescribed by law.

5.4. ……… (other liability provisions)

6. Final provisions

6.1. This instruction has been developed on the basis of the Professional Standard "", approved by Order of the Ministry of Labor and Social Protection of the Russian Federation dated December 26, 2014 N 1164n, taking into account ……… (details of local regulations of the organization)

6.2. The employee is familiarized with this job description upon hiring (before signing the employment contract).

The fact that the employee has familiarized himself with this job description is confirmed by ……… (by signature on the familiarization sheet, which is an integral part of this instruction (in the journal of familiarization with job descriptions); in a copy of the job description kept by the employer; in another way)

6.3. ……… (other final provisions).