Do-it-yourself glass ball with snow: from a jar, a wine glass. Do-it-yourself glass ball with snow or how to make a snow globe with your own hands DIY New Year's balls with snow inside

DIY snow globe

"Winter in a jar." Materials and tools:

• baked white, brown, yellow, green, black, cherry;
• liquid polymer clay;
• white acrylic paint;
• glycerol;
• hard brush;
• foil;
• waterproof silicone sealant;
• epoxy adhesive;
• toothpicks;
• small scissors;
• knife for polymer clay;
• Toothbrush;
• universal stack;
• small capacity;
• glass jar with screw cap;
• sparkles.

1. We form a ball out of foil, press it slightly onto the work surface and cover it with a jar on top to check whether it fits in it freely. It is necessary that there be a distance of about 3-4mm between the edges of the ball and the walls of the jar. If the ball fits tightly into the jar, it may not fit there after we cover it with clay. And then ours will be doomed to failure.

2. So, we have made sure that the foil ball fits freely through the neck of the jar. Now knead the white clay and make a cake 2mm thick out of it. Cover the ball with a flat cake, wrap its edges over the bottom of the ball and squeeze it well with your hands. We need the white clay to completely cover the entire foil. Now we place our snow hill on the center of the lid and cover it with a jar on top again. The hill should still fit easily into the neck of the jar.

3. Take the hill out of the jar and begin tapping its surface on all sides with a toothbrush.

4. Let's start making the house. To do this, mix white clay with brown to get a light brown color. We form a base for a rectangular house from light brown clay. Its size depends on the size of the house you want to make. In this case, the dimensions of the rectangle are 2 * 1.5 * 1.5 cm. Using the edge of a knife, we make horizontal indentations on each side of the rectangle.

5. Cut off the corners from the top side of the house base with a knife.

6. Cut out the roof. To do this, roll out brown clay into a layer 0.2 cm thick and cut out a flat rectangle wide.

7. Place the brown rectangle across the edge of the knife and bend it in half.

8. We lower the roof from the knife and lay it on top of the house. We form a small pipe from a small piece of brown clay, apply it to the roof and pierce it in the center with a toothpick or a thin glass.

9. Roll out the yellow clay thinly and cut out two small squares for the windows. We stick them on the sides of the house and in front under the roof. We sculpt a small door from cherry clay and also attach it to the house.

10. Mix light brown clay with a piece of cherry to obtain red-brown clay. Roll it out into a rope 1mm thick and lay out the contours of the windows from it.

15. Mix white clay with liquid clay using your hands until it becomes sticky. Then put it in a small container and add more liquid clay, mix thoroughly with a spatula until the consistency of a thick cream.

16. Insert the fence stakes into the recesses on the hill, and stick a snowman next to it. Apply the resulting “cream” of white clay on top of the house roof to make it look like snow, spread a little on the tops of the trees and on the side branches, as well as on the tops of the fence stakes. Now bake the product in the oven according to the instructions for the clay.

17. Now let's start collecting snowball with your own hands. Inner side Wipe the lids and bottom of the product with cotton wool and alcohol. Mix both ingredients epoxy resin V required proportion(see instructions for the glue) and glue the product to the center of the lid. Leave for several hours until the glue dries completely (from 2 to 24 hours, see the instructions for hardening time).

18. After the glue has hardened, squeeze a small amount under the rim of the lid silicone sealant for aquariums. Wait until it starts to harden a little. And it won't stick anymore.

19. Meanwhile, pour water mixed with glycerin in proportions of 1 to 1 into the jar. Do not pour the liquid to the very edge. Pour glitter or crushed foam into the jar. Cover the jar with a decorative lid, screw it tightly, turn it upside down and make sure that no water leaks out.

20. Apply white to the bottom of the jar acrylic paint using a hard brush, tapping movements to make it look like snow.

21. Now all that remains is to decorate the lid to make our DIY snow globe even more elegant. You can wrap it with beautiful ribbons or rain, glue pine cones, Christmas decorations or anything else that your imagination tells you.

If you liked our site, express your “thank you” by clicking on the buttons below. Tell your friends. Thank you:)

Dreams come true, even the most fabulous ones! Since childhood, I so wanted to have a similar snow globe, which often appeared in New Year's films. The gentle flickering of the snowflakes inside completely fascinated me...

With what joy I learned that you can make such a ball yourself, and make it exactly the way you want!

The work will require fairly simple elements, so find them and feel free to start creating New Year's miracle. This is very good gift idea, with your own hands you can create a little joy for your family and friends. And children will simply be ecstatic from such a toy!

Snowball

You will need

• glass jar with a tight-fitting lid
• boiled or distilled water
• glycerin solution
• waterproof glue
• snow substitute (artificial snow, glitter, foam, broken eggshells, coconut flakes, white beads)
• various figures from kinder surprises
• various little things for decoration

Manufacturing

Christmas story knocking on everyone's door! Don’t waste your time and start making New Year’s preparations now, thinking about gifts, remember this ball. Absolutely magical thing!

Share the most best ideas with your friends - tell them about this article with simple instructions on how to make a New Year's snow globe. May the festive mood be with you every day!

On supermarket shelves you can find thousands of different New Year's trinkets and souvenirs. However, you don’t have to run to the store for a gift; you can make it yourself.

In this article we will suggest you to make a wonderful souvenir yourself - a ball of snow. It's not at all difficult to make. To do this you will need:

• the basis for a ball with snow, it can be a purchased special container in the form of a glass ball, or a small beautiful jar (for example, from baby food);
• distilled water;
• glycerin (you can buy it at the pharmacy);
• glue, preferably waterproof;
• snow flakes or sparkles;
• small figurines of Christmas trees, animals, snowmen or any other New Year-themed items. You can also create an original ball with a photograph inside, but before placing the photograph in the liquid it must first be laminated.

Now that all the components are ready, let's start creating a New Year's masterpiece.

1. To begin, make a composition of figures so that it fits on the lid and at the same time goes into the neck of the jar. Then glue it to the lid and let the glue dry.

2. After this, pour glitter into the jar. By the way, in addition to sparkles or snow, you can also place other floating objects (beads, stars or snowflakes) in the future water balloon with snow.

3. Then fill the jar with a mixture of glycerin and distilled water, taking into account the volume of the composition. After lowering the figures into the jar, the liquid in it should reach the edges, as a result, the jar should be completely filled.

5. Now you can decorate the base of the ball (lid) as you wish. For example, wrap it in a piece of fabric and tie it with a festive ribbon.

Your snow globe is ready, shake it and enjoy the magical spectacle.

Such a homemade ball can become a decoration for your interior or a wonderful souvenir for your guests. Also, making snow balls can be great fun for kids. Collect such a ball together with your child, and you will be pleased with the happy shining eyes of the child when he sees the result.

You've probably all seen glass balls with slowly falling snow. You just need to shake the ball (or turn it over) and movement begins inside the ball. Many of you bought these balloons as gifts for New Year in souvenir departments of stores. However, it is not necessary to run for New Year's gift to the store, you can make it yourself.

How to make a snow globe? And making a snow globe yourself is not at all difficult.

What we need to create a snow ball (required materials):

• Base for a snow ball. This can be a purchased special container in the form of a glass ball, or a small jar with a screw-on lid.
• New Year-themed decorations, figurines, figurines (to create the atmosphere inside the ball). If the jewelry is metal, we recommend that you treat it with this product to protect it from corrosion. Do you want to create an imitation of snowdrifts in a ball? Self-hardening plastic can be used for this purpose. You can create an original ball with a photograph inside, but before placing the photograph in the liquid it must first be laminated.
• Glycerin solution (for a smooth fall of snowflakes). It can be bought at a pharmacy.
• Distilled water (you can also use boiled water after it has cooled completely, but distilled water is better).
• You can use food coloring to add a unique twist to your idea.
• Snow flakes (artificial snow), sparkles, stars. You can make snow with your own hands. To do this you need to remove the film. eggshells and grind it. You can also use finely chopped rain.
• Two-component epoxy glue (waterproof, transparent), aquarium sealant or glue gun

When you find everything necessary components, then you can start creating a glass ball with snow inside.

Snow globe making process:

1. First you need to create a composition of figures so that it fits on the lid. Then glue the decorations to the lid and dry them.
2. Once the epoxy glue is completely dry, pour distilled water into the jar and add food coloring (any color of your choice).
3. Mix water and glycerin in equal proportions. But you can add a little more glycerin. In this case, snowflakes will fall more slowly.
4. Then add sparkles, snow, stars.
5. Coat the lid threads with glue and close the jar tightly. Let the glue dry.

Your snow globe is ready, shake it and enjoy the magical spectacle.

Do you want to make a New Year's glass ball with snow yourself? Can be used for interior decoration different design, depending on what symbolic you want to depict there. It could be a Christmas tree, deer or a snowman for the New Year holidays.

You can make a glass snow ball either for yourself or as a gift, which will be especially nice to receive, since it is made by yourself.

New Year's ball with snow

Required equipment:

A jar with a lid of any shape, preferably an aquarium type;

Figurines and various decorations;

Distilled water or, as a last resort, boiled water;

Glitter or artificial snow (purchased in stores where there is a lot of all sorts of things for needlework);

The glue must be waterproof.

How to make a glass ball with snow

1. Glue figurines and decorations to the lid with glue. Leave to dry completely.

2. After this, fill the jar with distilled or boiled water.

3. Add glycerin to the liquid. Adjust the ratio of water and glycerin to your preference for the rate of particle settling. The more glycerin, the slower this process will take place.

Remember not to fill the jar too full. Please note that when closing the lid, the figures will push out excess liquid.

4. Add glitter. The size and their number are also at your discretion - what kind of weather you want to make inside your container: snowier or quieter.

5. Close the lid of the jar as tightly and airtight as possible. It is better to use a seaming machine or add a little glue for reliability.

6. Now you can turn our beauty over and admire the result. Disguise the lid at your discretion.

DIY snow jar

This is another simple one new year idea for homemade products. This souvenir resembles a snow globe, which we already wrote about, but without water. Just a winter composition in a glass container. A wonderful gift or decoration for your windowsill, shelf, etc.

Materials:

Glass jars;

Decorative ribbon-thread or decorative metallized thread (the more convenient to work);

Spruce branch;

Balls or bells of small diameter;

Toy – Christmas tree on a stand;

Salt or dry artificial snow.

Manufacturing process:

It is better to take jars of a beautiful, unusual shape that will look unusual and stylish.

Also, the arrangement will look better in a medium or small jar, so choose something smaller.

You can glue shapes to the bottom of the jar or to the lid itself and decorate them with pompom balls on top.

1. Glue the Christmas tree figurine and the spruce branch to each other.

2. Apply glue to the bottom of the Christmas tree stand and glue it to the bottom of the jar. Leave until completely dry.

3. Pour salt into about 2/3 of the container. Close the jar tightly.

4. Glue one small ball to the ends of the thread. Tie a string around the jar.

Snow globe from a wine glass

A snow globe can also be made from glass goblet. The decoration will turn out to be very unusual and beautiful, and can serve as an original candlestick.

Materials:

Small Christmas tree figurines or other toys,

Artificial snow or snow substitute,

Hot melt adhesive.

How to make a snow globe

For the snow globe, choose a beautiful wine glass with a long stem. Usually, red wine is served in this way.

Place the glass on the cardboard and trace its diameter with a pencil. Then this circle needs to be cut out with scissors.

Glue small Christmas tree figures to the cardboard using glue.

Take one tablespoon artificial snow and pour it into a glass.

Hot glue the edges of the cardboard and attach it to the wine glass.

You can add an extra nice layer of wrapping paper on top to make it pretty.

For strength, you can apply several layers of glue along the edges so that the base sits firmly.