Homemade housing for a flash drive with your own hands. DIY flash drive: life hack for making a stylish case for a USB drive

We welcome all beginners as well as experienced life hackers on this site!
We have an electronic magazine in which we write different interesting articles O useful gadgets and unusual concepts. We also look into the future or make the present more interesting, beautiful and useful. Read the next article of the electronic magazine.

Almost everyone has USB flash drives today. But despite all the diversity, the range of housings for such devices is quite limited. Why not make a case for the flash drive yourself? It's not as difficult as it seems, you just need to spend a little time. But you will become the owner of a unique thing.

So let's get started! Following step by step instructions, we will make a case for our USB flash drive from bricks from Lego children's construction sets.

This is what she will look like

Tools and materials
Penknife
Pliers
Several Lego bricks
Super glue
Sandpaper
Metal polish
Flash drive

Step 1: Body Base

Internal elements are broken

USB memory cards are available different sizes. We will be packaging a fairly large board. Therefore, we will need a Lego brick of 6×3 cylindrical seating elements (let’s agree to call them “dots”).

You need to cut everything with a penknife internal partitions bricks and then break them out using pliers.

We use two more low-profile bricks with dimensions of 4×2 and 2×2 “points” to create the lid. Also for the lid you will need a low-profile element 1x6 “dots” (for the lid you can use other combinations of construction parts, or you can simply take exactly the same brick as for the base of the body (6x3) and carefully cut it with a jigsaw top part parallel to the horizontal plane).

Using superglue, glue the lid elements together to create a part measuring 6x3 “dots”.

Step 2. Install the board

Board in case

At the end of the case we cut out a groove for the USB connector, and after a little adjustment using a penknife we ​​install the device into the case.

Step 3: Mounting the board

Fill the body with silicone

We place brick scraps on the bottom of the case and ensure that the board is parallel to the horizontal plane and does not press through. We fill all the remaining space in the case with transparent silicone, sealing it to reduce the possibility of any movement of the flash card inside the case.

It is important to use transparent silicone, since the indicator LED will need to shine through it.

Step 4. Gluing and polishing

Cleaning the edges

Polishes of different abrasiveness

To ensure that there are no gaps between the lid and the body, take sandpaper, place it on a flat surface, and level the bottom plane of the lid on it.

After we have glued the lid to the body with superglue, using the same sandpaper we remove burrs and glue smudges from the side edges of the body.
Then we finally polish the body with polish.

Step 5. Completion

The case is ready

Compare your exclusive and mass consumer goods

Looks stylish!

But the creative possibilities for creating exclusive flash drives do not end there. On the contrary, there can be an infinite number of types of cases for them.
Look what other craftsmen have done.

Do you have an original flash drive? What ways of individualizing this mini-media do you know?

Meanwhile, the mini-magazine still contains some unread curiosities: a visionary video about the medicine of the future; gadgets - stationary cellular telephone and a bottle for tourists to disinfect water. and don't miss anything!

Hello, friends. Creating unusual cases for flash drives has long been a separate trend in modding. Many craftsmen work exclusively with flash drives and, moreover, even sell their mods through online stores and auctions. It would seem like an ordinary compact USB drive - why exactly has it become so popular? Before the advent of flash drives, almost every PC was equipped with a floppy drive for reading and writing floppy disks. Unfortunately, floppy disks were not very convenient and significantly limited the capabilities of users. A flash drive has become a step forward - a compact device, characterized by reliability, lightness and the ability to accommodate a large amount of memory. A flash drive has become a constant companion for many people, because carrying disks or bulky external HDDs with you is very inconvenient and it is much easier to take a neat keychain in which everything is stored. necessary information. Since this thing is always at hand, many began to think about the external design and style of USB drives. does not require a huge amount of materials, large financial costs and time. Ways to decorate your flash drive or make it a full-fledged custom case with unique design a huge number and many are within the capabilities of even beginners and inexperienced modders.

Modding flash drives in steampunk style.
Steampunk appeared relatively recently, but its popularity is only growing with each passing year. Many designers have even begun to focus exclusively on steampunk, as the demand for such unusual and original things is growing at a tremendous speed. Steampunk occupies a special niche in the style. The direction of alternative-historical steampunk, which is based on stylization of real life, is especially popular. historical world XIX - early XX centuries.
Modder Rob Smith, also known under the nickname Back2root, became famous in the foreign modding scene precisely thanks to his quality work on creating custom cases for flash drives. For all his mods, he uses wood, elements from old mechanical watches for styling, and small inserts of copper and brass. Everyone is different interesting design and a comfortable body. Here, for example, is a stylish flash drive capable of storing up to 16 GB of information in a new case in the steampunk style:

Modder -=ReBiT=- built his flash drive into the body of an old Zigigalka using an ordinary school eraser. An example of simple, cheap and. Despite the simplicity of modding, such a case will perfectly protect the filling of the flash drive from mechanical impact.

A flash drive is a universal gift that will be useful in every home. You can record your favorite songs on it or make a selection good photos. This is a great surprise for a birthday or other holiday. Everyone can fill it to their own taste, but you will learn how to turn an ordinary flash drive into a designer gift with your own hands from our master class!

Materials and tools

Today we will make a case for a flash drive with our own hands from wood using the following materials:
- small wooden block(in our case this is a birch burl),
- flash drive with a collapsible casing,
— 2 metal bolsters for a flash drive (you can buy them, for example, here ),
- several different sanding papers,
— drill-mill,
- epoxy adhesive.

Instructions

The entire manufacturing process is quite simple and does not take much time. One product took about 2 hours, not counting the time the glue hardened.
This is a beautiful designer gift that can be given to a loved one or a stranger, a teenager or an adult. The wooden case is comfortable and pleasant to hold in your hands; this card is durable and at the same time unique.
Here's another one interesting idea how to make a flash drive from an ordinary lighter!

It always looks bright and unusual, especially if it is a flash drive in a wooden case. However, this will require a lot of time and effort, but believe me, the result will be worth it. In order to make an original flash with your own hands you will need: three boards, a sharp knife, a cutter, wood and metal drills, a needle file, a file, epoxy resin and super glue.

DIY case for a flash drive made of wood

In the end, this is exactly what your three blanks should look like.

Now you need to make a hole in the central plate into which you should attach the flash card. The hole should fit very well, and its edges can be coated with super glue.

Now you need to make a hard layer so that the flash drive does not break under significant physical activity. For example, it often happens that flash drives simply break out of their plastic cases, then what can we say about wooden ones.

A ruble coin is perfect for this and needs to be thoroughly cleaned. sandpaper. (Almost polish). Then using epoxy resin glue the metal blank to the wooden body. In advance, of course, using a drill and a file, we make a hole in the coin into which the USB connector will go.

You should end up with a “rough” flash drive like this, which will still require a lot of work. In the same way, following the above instructions, you should make a lid for your designer craft. Please note that after all the operations performed, the craft still does not look stylish.

In order for the author’s flash drive to acquire a truly “saleable appearance,” the workpiece must be carefully processed with a file. After this, the surface can be treated with varnish (or you can leave the natural wood covering intact) Agree that such a craft will be a truly original accessory. I bet that you will not find such a flash drive in anyone’s possession.