DIY rotating mechanism for the table. We make the work of the pastry chef easier by making a turntable for cakes with our own hands

It’s probably no secret to many that presenting your work, and even in 3D, is the key to success. The most simple solution in this case, is a rotating presentation table. You can scroll through Netske’s works on it, or you can use it in confectionery production, like assistive device when applying cream.
I need this table to display my homemade products.

And it's very easy to do.
For the design we will need:

• - microwave motor;
• - switch;
• - network cable;
• - chipboard or plywood;
• - self-tapping screws;
• - corner.

The design was developed by Mastyrkin.

This video shows the manufacturing technology of a rotating table, which is equipped with a rather complex technical filling, but you can repeat it yourself.

This video tutorial from Igor Negoda’s channel is dedicated to a homemade rotary table, the details of which you can see on the screen. The author of the video carved all these details into lathe and did something on milling machine. The table will be used in a vlog to demonstrate various small devices. Many have seen such structures that are convenient for filming videos and produce a beautiful 3D effect. This device self-sufficient, will have its own engine, its own battery and charging. That is, it will be possible to connect to a PC and charge.

Various interesting items and spare parts are sold with free shipping in this Chinese store.

Table assembly process

In order, as the master did it all, we will slowly collect it.
The manufacturing process of the rotating table was very long, that is, with interruptions, there were not enough parts. The biggest problem was with the gears. That is, I picked up different gears, set them up for a long time, and even thought about giving up the idea of ​​making a rotary table with the existing gears. But now that the product is ready, we can assemble it and show you how it looks and works. This is the main part, it is made of aluminum, everything here is milled.

Let's start the assembly. Here in the middle there is space for bearings. Ball bearings will be used. I took it apart and cleaned and washed everything very well. If you press gently, everything is inserted by hand. One bearing needs to be slightly lubricated with Panasonic oil. We insert the second bearing, climbed into the shaft. It also needs to be lubricated a little. These bearings are needed so that the mini table can rotate. A thrust bearing is inserted on top. This is the denser part. And this is part. The one that will rotate has a slightly smaller diameter. Now if you put a table here, it will rotate.

Now let's try to assemble the mechanism. The brass pulley was also made on a lathe and a bearing was pressed here; it sticks out a little because the design is different but it doesn’t fit here. Either it was necessary to make a larger pulley here, which would increase the revolutions of the rotation table, or it needs to be redone. Since I did it gradually, I had to adjust and redo it all the time.

This pulley is made for belts and is attached to the hole. An additional washer is inserted here and you can tighten it. Having pre-lubricated, we attach the drive gear.

The washer is also brass and is placed in its place. To ensure the transition from belts to gears, an adapter pulley is used. With its help, rotation will be transmitted to this gear.
This table is installed at the very last moment, after the electric motor is installed. It is already assembled along with the power supply circuit. There is a switch here, you can hear the engine running.

Let's assemble the body parts. Although we will need the motor to understand exactly where the switch should be, since it is already soldered. You need to know this very precisely.

It often happens that the thrust bearing flies out and in the future we will secure it thoroughly.

Turn the table back over. A decorative ring is installed on top and pressed with screws. I cut a thread specifically for the ring.
This system is assembled, you can now turn the table over and thoroughly mount the engine and attach the electrics. The engine fits tightly and can be adjusted in height.

Electrics

The charger is glued with double tape. You must first degrease the surface, otherwise the tape simply will not stick. The charging board can be directly attached to the case. Now we attach the battery in the same way. Two strips of tape are enough for him to hold tightly and not fall off over time. It does not fall off when heated and holds well. All that remains is to fix the switch.

The electrics are assembled. Turn on the switch and the engine rotates. The engine must be adjusted in height. There is one caveat. We need to take off this ring now, because we won’t be able to insert the belt here. You need to position it well so that there are no distortions. And the second belt is put on. Also back ring. The mechanism is ready. If we turn on the lever, everything here rotates.

All that remains is to set up a table. To do this, we reinsert the bearing and the table. This is not the final option yet. Decorative tables can be swapped on top. It is screwed from the bottom so that it does not fall out. Similar tabletops, or as they are called, interchangeable tables, will be used on top. Could be made from wood wooden products or create some kind of contrast. Pay attention to how it is installed, as if on an air cushion, that is, it is made very tightly

The rotating table is assembled. You can turn it on, it works and rotates. The rotating table makes a little noise, so I inserted a backing pad. This is how the device turned out. Although the degree of reduction here is high - the gearbox turns out to be four-stage. But still the speed of work was too high. But in fact, the video can be slowed down in any way you like. For such purposes, a rotating table was created.

The device has a charging module power bank, small scarf. It can charge 3.7 volt lithium-ion batteries. We take a powerful power bank and try to charge it. The charge started. In this case, the table can be connected. Turn it off. The little red one disappears.

Conclusion

The master plans to improve the model, since the load capacity is quite high, but the rotation speed does not suit him very much. Although you can slow down the video, I would like it to spin much more slowly. You can add a speed controller to the motor, but then the load capacity will be even less. Subscribe to the channel “Igor Negoda”.

It is very convenient for confectioners who make cakes to use various types of devices that facilitate the decorating process. finished product. Fortunately, today stores offer a wide range of similar equipment. One such device is a turntable. True, the cost of such a table is quite considerable, and it is often easier and more profitable to try to make a turntable for a cake with your own hands.

How is it convenient?

This table will be useful not only for professional pastry chefs. It will be very useful both for those who like to cook for pleasure, and for cooks taking their first steps. This table will come in very handy for housewives who decorate cakes with fondant. It looks like a circle-pedestal on a leg that rotates around its axis. The main goal is to make the pastry chef’s work as ergonomic and convenient as possible, and to simplify the task of decorating the finished cake. The cake is placed on a stand, and by rotating it, you can easily cover it with fondant, decorate it with figures, inscriptions and other decor. In this case, there is no need to walk around it, the confectionery product will rotate on the stand, and the hostess will have access to any place on the cake.

What you need

In order to make a cake turntable with your own hands, you will need:

• Bearings - 2 pcs. It is better to use double pressed bearings.
• Wooden blank for a circle. This could be the door from old furniture or any chipboard material, available.
• Nails.
• Self-tapping screws.
• Tube (plastic or iron).
• Circle made of iron (metal).
• plywood sheet.
• Plastic or decorative self-adhesive film.

How to make a turntable with your own hands

This process is not too complicated, but requires male participation. First, you should draw a drawing of the future stand and prepare everything necessary elements.

If the bearing is not double, then two will be required, and one must fit into the other.

1. We push the smaller bearing into the larger one using nails.
2. Using a jigsaw, we cut out two circles with a diameter of 20 cm from a chipboard blank (or an old door).
3. In one of them, a hole should be made in the center into which the bearing is placed. It is this technique that will ensure the rotation of the entire mechanism.
4. We attach the second circle with self-tapping screws (you can use liquid nails) to the first.
5. The bottom circle, which does not have a hole, will stand directly on the table.
6. Then a plastic tube is inserted into the bearing (an iron tube can be used, if available). It will connect the base and top part- pedestal for cake. The tube must fit very accurately into the bearing so that it does not dangle, otherwise it will be difficult to use the turntable. Optimal length connecting tube - 15-18 cm. In this case, it will not be too short and too long, using the device will be as convenient as possible.
7. The top (the stand itself on which the cake is placed) is best made of metal. You will need a metal circle with a diameter of 30-40 centimeters. It is attached to the top of the tube (metal or plastic) by welding. Of course, not everyone has a welding machine at home and a person who knows how to do it. In this case, you can use cold welding, reminiscent of plasticine.
8. Plywood or chipboard, equal in diameter to the metal circle, is attached to the top of the metal circle using liquid nails or self-tapping screws.

Now the DIY cake turntable is almost ready. All that remains is to add aesthetics to it. To do this, the top is covered with wallpaper film or a plastic round base. This will give the device a finished look and make it easier to maintain.

As you can see, if you want, making a turntable for a cake with your own hands is not so difficult. A set of materials for its assembly can be found in almost any home, and the work process itself is not that complicated.

How can I replace a cake turntable?

What is the solution for those who do not have a turntable? Very simple and affordable solution also found in almost any home. You can use a rotating plate from the microwave. Almost all models are designed in such a way that they have a glass plate and a round stand at the bottom. You need to remove the plate and the circle underneath it from the microwave. If it is too smooth, you can put paper (a paper towel) underneath to reduce slipping. This way you can decorate the cake by smoothly rotating it around its axis. Also, a glass plate will not spoil the view when serving the finished decorated product.

A rotating cake stand is a necessary tool for pastry chefs: from beginners to true masters. If you want to be able to reach the cake from all sides at once, but without having to "cut circles" around it, definitely consider having a rotating cake tray. Only this will help make the cream decoration even. And the decorating process itself turns into a mesmerizingly beautiful event.

A rotating cake stand is a necessary tool for pastry chefs: from beginners to true masters.

Such rotating stands for decorating a cake look great at a large feast, on the windows of cafeterias or pastry shops. If you want to present your handmade masterpiece in the most attractive way, you can use a rotating cake pan for this.

The product consists of:

• Working surface round shape;
• Leg-shaped bases;
• Rubber bands;
• Rollers.

The design is designed so that the tray (stand) rotates freely around its axis. This makes it easy to access the cake from all sides. Some options are manufactured with a tilt, so it is possible that the device can be bent at different angles. It is these designs that are most convenient when decorating desserts and when demonstrating sweet masterpieces. This stand allows you to create original decoration and create any decorations with maximum convenience. Moreover, the confectioner does not have to worry at all that his product will be damaged, eaten away, or even fall.

Types of rotating cake platforms

Specialized markets offer many tray stands from world-famous brands.

Someone wants to have compact products for a dessert bar (Candy bar) when serving sweets. Some people are impressed by rotating models with a tilt, while for others the ability to use only 2 tiers of the stand is not suitable.

Varieties of design

There are such models according to the form:

• Oval;
• Circle;
• Square;
• Rectangle.

As well as shaped trays for an extravagant demonstration of confectionery creativity.

A rotating cake maker is often equipped with complementary accessories: it can be supplied “accompanied” by a spatula, a lid, baking dishes, a pastry syringe, etc.

Materials used to make a rotating cake decorating stand

There are cake makers:

• Steel;
• Glass;
• Plastic;
• Ceramic;
• Wooden.

Plastic rotating cake stands are a rather fragile product. This is the most affordable option. Thanks to the last circumstance, it is also the most common. They are presented in a wide range model range, are made with or without slope. Plastic cake pans usually have a non-slip material, which promotes good grip on the table. It's quite convenient.

The glass rotating cake tray looks elegant. Made from tempered quality glass, often decorated original drawing. It looks neat, impressive - you can take a photo and serve it on a rotating plate. It has a non-porous surface, washes quickly and easily, and does not absorb odors.

Metal constructions heavy, but they are designed to last longer. They can withstand heavy cakes and do not deform over time.

The wooden cake maker is constructed from natural material, looks aesthetically pleasing. Sweet products can be served directly on it. Cost compared to plastic stand rotating for decorating cakes, above.

The optimal diameter of wooden structures is at least 34 cm. This cake pan is spacious, it is convenient to decorate products from three kilograms (or tiered ones) and make confectionery decor on them. The wide surface makes it possible to place the leveling spatula in a convenient way.

A wooden tray has some advantages:

• It is durable;
• Does not absorb odors and moisture;
• It is not difficult to care for and is easy to clean.

What is important is that it “fits” into any interior.

Main criteria when choosing

When planning to purchase a kitchen accessory, pay attention to:

• Reliability;
• Quality of the material (it must be hypoallergenic and hygienic);
• Persistence.

Decide on the shape of the baked product, focus on the appropriate diameter. The wider the plate, the more convenient it is for the pastry chef to act. In specialized markets you can find models with a width from 10 to 40 cm. Many consider the optimal diameter to be 28 - 30 cm.

Don't forget about the stability of the turntable. This is an important selection criterion.

When choosing a rotating cake platform, check whether there are markings on it. This is an excellent help when decorating: decorative elements can be distributed at the required angles, and the edges of the cake can be made as even as possible.

It is worth paying attention to the possibility of disassembling the structure: if the bearing in the rotational mechanism breaks, the non-dismountable stand will have to be thrown out. In such a situation, it does not stop functioning, but simply does not rotate normally. When you run a spatula along the side of the cake, it just jerks sometimes. This prevents the complete design of the product.

Often, for most confectioners, the decisive condition for purchasing such a cake maker is the presence of a transparent coating. It is ideal for serving purposes.

Popular with experienced craftsmen and additional mesh. It often comes as an accessory to a swivel stand. This accessory makes it easy to cut cakes into beautiful pieces. It ensures accuracy in work: perfect lines, symmetry, a layer of mastic or glaze after cutting is not smeared.

It is useful to purchase a rotating platform on a leg for decorating cakes because today it is the most convenient equipment for the design and subsequent presentation of sweet products.

The rotary tray is useful for banquet events and as a “showcase” for restaurants, cafes, and pastry shops. Can be purchased as an inexpensive plastic product, and a six-tier stand.

How to make your own rotating cake stand

A rotating cake stand can be purchased at finished form or assemble it yourself if its purchase is not planned in the near future. Homemade device has many advantages:

1. You yourself are free to create a drawing of the product, think in detail about what dimensions will be most optimal.
2. You can create a cake maker that will fully suit your desires and preferences.
3. A self-made design will cost less than one purchased in a store.

Materials for manufacturing

A rotating platform can be made from the following materials:

• Plywood;
• Tree;

Each option has its own advantages:

• Plywood and MDF are easy to process;
• It is safe to work with wood, the material is environmentally friendly, the texture is pleasant to the touch;
• Chipboard is inexpensive, has attractive appearance, working with him is a pleasure.

Necessary tools for manufacturing

You will need the following:

• Bearings (you can buy them at any auto store; they can be pressed or double; the first option is preferable, since they are easy to install);
• Self-tapping screws;
• Metal circle;
• Nails;
• Plastic tubes;
• Lumber (in this case plywood).

Manufacturing process

Think through your sketch carefully before starting work. Indicate on the drawing the design of the product, what its exact dimensions are, and what you are going to make it from. With this diagram at hand, you can easily and without errors assemble a rotating platform.

Subsequence:

1. We cut out a round tabletop from plywood according to the drawing.
2. Next, take the bearing (if you choose not a pressed one, but a double one, use nails to hammer the smaller one into the larger one).
3. IN wooden base cut 2 circles (d 20 cm).
4. Insert the bearing into the circle prepared in advance.
5. Using self-tapping screws, screw both parts together and place the bearing in the center.
6. The turntable is equipped with plastic pipes. They should connect the top and bottom of the future cake pan. It is better to make the tube at least 15 cm long (to simplify the process of decorating baked goods: in this case, you do not need to bend over the culinary masterpiece being decorated).
7. The top of the turntable is made of metal. Ideally, the diameter of the metal surface is 30-40 cm.
8. The elements are welded together. If you use welding machine you don't know how, use it cold welding. The rotating part is installed on the pipe, the elements are fastened with self-tapping screws.

Your design is ready.

To make the rotating cake stand decorative appearance, it should be covered with thin plastic. The product can be decorated with self-adhesive film. It won't be difficult to stick it on and it's easy to clean.

If you approach the issue of making a rotating cake maker creatively, you can get different trays. The main thing is to clearly check the drawing and select high-quality materials.

Video: Making a rotating stand with your own hands

2692 0 0

How to make a rotating table: design and design choices, plus simple assembly instructions

Rotating tables are furniture in demand in different areas, starting with the advertising business and ending with metalworking. But this time you will learn how to make an easy-to-use turntable for home use. I present to your attention a simple assembly instructions, plus recommendations for choosing a suitable design.

Select rotating tables

Illustrations	Types of furniture and their descriptions
	Classic rotating tables. In this design, the rotating tabletop is mounted on a vertical support. Thanks to the presence of a bearing, the rotating part of the furniture rotates 360 degrees around the support.
	Fine rotating tables. Such devices are used professional photographers or video operators for filming various items from different angles. The photo shows a small homemade table with a small diameter rotating surface.
	Glass rotating podiums. Such designs are used to demonstrate jewelry and other small-sized products that need to be shown favorably from different angles.
	Wooden rotating podiums. These are massive round dining tables, in the center of which there is a rotating structure made in the shape of a tray. The design is used during banquets and other events where it is customary to serve dishes beautifully. The presence of a rotating part is designed to facilitate access to dishes from anywhere on the table.
	Kinetic rotating podiums. The design is based on two combined transparent surfaces, onto which certain ornaments are applied. When the position of the transparent surfaces changes, the ornaments overlap each other in different ways, creating certain patterns, thereby achieving a special visual effect, as shown in the photo.
	Automotive podiums. Essentially, these are the same tabletops mounted on a movable support. The podium surface is driven by an electric motor with a reduction gearbox. Taking into account the weight of the exhibits, the structure of the turntable is assembled from rolled metal and made as durable as possible.

Which of the listed designs should you choose for self-assembly? If furniture is made for domestic use, we give preference to ordinary wooden structure, where in the center of the round dining table a rotating tray is installed.

Select a table top design with a rotating center

The drawing shows a classic wooden table on a vertical support. A tray on a bearing is installed in the center of the tabletop. The dimensions indicated in the drawing are selected taking into account the comfortable placement of four people. In the assembly instructions we will be guided by these dimensions.

The drawing shows a rotating unit where the tray rotates thanks to a ball bearing. Such a unit, on the one hand, ensures smooth rotation of the tray, and on the other hand, guarantees a long service life of the entire structure. However, the design of the unit can be simplified without compromising the smoothness of rotation by removing the ball bearing.

Do it yourself: what to collect

Let's say you have a regular, unremarkable round wooden table, but you want more comfortable dining furniture with a rotating center part for comfortable access to dishes. I suggest simple instructions assembly and installation of that very rotating part, by turning which it will be easy to get this or that dish from any place at the table.

The assembly instructions in this article are intended for round tables with a diameter of 1-1.2 m. What to do if initially there is no such furniture?

The instructions in the article are a guide to assembling a small tabletop. Therefore, simply increase the proposed dimensions and, in addition to the rotating part, assemble the main tabletop from the same boards.

Select materials

• Board 70×25 mm.
• Wood screws 30×5.
• Carpenter's glue.
• Paint and varnish materials for finishing works.
• Rolling bearing (alternatively, you can make it yourself, as described in the instructions).

Select tools

For work we use the following:

• Jigsaw.
• Screwdriver with bits and drills.
• Big compass.
• Clamps.
• Pencil and ruler.
• Painting tool.

Assemble a rotating table with your own hands

Illustrations	Making and installing a turntable - step-by-step instructions
	Make a template. On old wallpaper or on unnecessary cardboard, draw a circle with a diameter of 550 mm. Cut out the circle according to the markings made earlier. If you don't have a compass, a rope will help you draw a circle. We tie a nail to one end of the rope, and a pencil to the other at the required distance. We place the nail in the center and draw a line with a pencil.
	Mark the template into segments. Fold the paper circle in half and then three more times to get 8 identical wedges.
	Make an insert template. We measure 3 cm from the extreme point of the circle along the fold line. We connect the marked points and get the workpiece as in the photo.
	Cut out the inserts according to the template. We cut off one of the eight outer fragments from the template, as shown in the photo. We attach the template to the board and trace along the contour. We cut out the part according to the markings made. To make a curved cut we use a jigsaw. As a result, we make 8 identical blanks.
	Sand the liners. We smooth out the unevenness with sandpaper and clean the workpieces from dust.
	Make the base of the circle. We fold the previously prepared 8 parts and glue them end to end. In order to obtain acceptable gluing quality, we place the parts on a flat surface. From plywood 4 mm thick we cut out a circle with a diameter of 530 mm. We glue the plywood circle on top of the hoop glued together from wooden fragments. After the glue has completely dried, turn the circle upside down and remove the glue deposits from under the boards.
	Fill the base of the circle. We apply planks to the notch of the circle one by one and cut them so that they fit close to the side along the edge. We glue the boards prepared in this way into the recess and place them under the load while they dry.
	Varnish. We coat the finished tray with varnish or other paint and varnish materials, which match the design of the table.
	Install the turntable. We attach the outer ring of the sliding bearing to the main table top. We attach the bearing part to the bottom of the tray. We insert the tray into the bearing on the tabletop, after applying lubricant.

Explanation of the instructions: how to make a plain bearing? In order for the rotary tabletop to rotate freely without swaying, you need a bearing, which you can make yourself.

The diagram shows a simple plain bearing consisting of two rings - an outer and an inner ring or cylinder. Both structural elements are attached to the corresponding sides of the combined tabletops.

The gap between the outer and inner rings should be no more than 1-2 mm to avoid play. One ring is attached to one tabletop, the other to the other.

Perhaps the assembled unit, when scrolling, will not be as convenient as a ball bearing, but given the rotation speed of the rotary tabletop, this is not so important.

Calculate the labor costs and cost of making a table with a rotating center with your own hands

What will cost less - buying a table with a rotating center or self-production such furniture? Of course, it’s cheaper to do everything yourself. Let's try to calculate how much it will cost to make a rotating tabletop, described in the instructions.

You will need a board 70×25 mm, length 4 m, which costs on average 130 rubles. Plus, you need 20 self-tapping screws, which will cost 20 rubles. In total, the materials will cost 150 rubles, and to this we will add some wood glue and varnish and stain from a home workshop.

As for labor costs, they are quite comparable to assembling a regular dining table. If you only make a rotating tabletop to an already ready table, everything about everything will require no more than one free day.

Conclusion

Now you know what rotating tables are, how they work and how to make them yourself from available materials. If you have any questions, write about it in the comments and don’t forget to watch the video in this article.

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!