Undeservedly forgotten? How to make an ottoman with your own hands to give a second life to old things. How to make an ottoman with your own hands: from wood, a knitted pouffe, a home-made cover, poufs in the interior How to make an ottoman from a chest

The question of how to make an original ottoman with your own hands is of interest not only to experienced needlewomen, but also to novice craftsmen. And not in vain, because it affordable way update the furniture in the living room or hallway, while spending mere pennies. The task is greatly simplified by the fact that on the Internet you can find a lot of step-by-step instructions on how to sew a soft pouffe with your own hands from unnecessary things and improvised materials. Such home workshops are especially relevant for students and young families whose budget does not allow them to get hold of brand new furniture.

How to make an ottoman at home?

In fact, making an original pouffe yourself is not so difficult - a little effort, a bunch of unnecessary old things and a bit of inspiration will be enough. Making a drawing of a future creation yourself is quite problematic - it requires basic drawing skills and knowledge of the basics of geometry. Of course, we all once learned this at school, but we have already forgotten a little. In this case, drawings, assembly diagrams and calculations for materials will serve as a lifesaver.

Based on them, we make templates on paper, which are necessary for subsequent work on the pouffe. But since we are working on the manufacture of designer furniture, you can easily adjust the dimensions for yourself.

The next step will be the preparation of patterns. When transferring each detail to the fabric, do not forget to make allowances for the seams, otherwise the product will turn out to be much smaller than desired.

By the way, it is not at all necessary to cut out each part of the future product from the fabric - you can crochet it. There are also ways to make a homemade pouffe without a preliminary drawing and paper templates.

How to choose a ottoman model?

There are many different techniques, thanks to which you can make a beautiful and functional pouffe with your own hands. It is not surprising that it will be quite difficult for an inexperienced needlewoman to decide on the model of such a product and the method of its manufacture.

First you need to decide where you plan to place your future masterpiece. If in the hallway, then you should look at the frame models with legs in classical style- they will not only decorate the interior, but also cope with the "direct" duties assigned to them.

Pouffes with a rigid frame will also be appropriate in the corridor, but soft models are quite suitable for the bedroom.

An ideal option for a children's room is a voluminous bag with which it will be quite convenient for children to mess around.

As for the technique of execution, then focus on your strengths. If you are good at managing sewing machine, then pay attention to round soft models.

Are you good at knitting? Look for crochet patterns for poufs.

Well, if you are a fairly experienced needlewoman, then you can take a swing at the model with carriage coupler and a drawer that will perfectly fit into your interior.

If you wish, you can also make a miniature copy of the chair by making a classic square ottoman with a back and removable cushions.

With all the variety of models and shapes, this piece of furniture will not be difficult to make even for those people who do not have experience in furniture design. Of course, a pear-shaped bag is much easier to make than a leather bedside pouffe with a storage box for small items, however, both options can be made by a novice master.

First, try to make a simple frameless ottoman for a sofa, which requires a minimum of details, knowledge and experience, and only then proceed to more complex models.

DIY wooden ottomans

Unlike simple frameless forms, with wooden product you will have to get confused, both with the selection of materials and with the choice of model. Frame products have two main shapes - angular and rectangular. The first will be preferable for small spaces, as it will help to use the corner and make your interior more functional. This is especially true in a small hallway or narrow corridor- here large forms such as a ball will simply take all the free space.

Looks very organic in the living room wooden models, stylized as chests or animals (white leather hippo will become a real decoration of your home).

When choosing a model, make sure that it fully matches the original style of the room. This means that in a loft interior, an exquisite ottoman with a capitonné carriage screed will look a little ridiculous. The same can be said if an ultra-modern 5 in 1 transformer on wheels is placed in a classic living room. The color scheme should also be compatible - in the “sky” interior (in blue and blue tones), light green furniture “cuts” the eye a little.

The wooden frame for the ottoman has another advantage - spaciousness. If you have small hallway, then you can make a folding pouf-bench, which in combination will serve as a large and roomy shoe rack.

Do-it-yourself bottle ottoman

The product from plastic bottles has several advantages at once:

light weight - the average weight of one piece of furniture does not exceed 2 kg;
profitability - the main part of such furniture is household waste and unnecessary old things that cost practically nothing, so you only have to pay extra for upholstery fabric;
environmental friendliness - such needlework is considered waste disposal and contributes to the conservation of nature.

You can make ottomans from ordinary bottles, and from plastic eggplants, the main thing in such work is to fix the plastic filler well with adhesive tape, otherwise the product will be loose. For the stability of your pouf, it is also worth cutting out the bottom and lid from thick cardboard and also fixing them with adhesive tape. Next is to make a fabric cover and New furniture ready.

Do-it-yourself chipboard ottoman

As mentioned earlier, wooden models are quite practical and durable. If you don't have on hand natural wood, then you can also use wood chip boards. This material is perfect for making furniture. It makes roomy pouffes with a lid and soft upholstery. However, when choosing such a material, one should not forget about safety - use only ecological chipboard for furniture, which does not contain formaldehydes hazardous to health.

Do-it-yourself ottoman from improvised materials

Experienced needlewomen know that you can make exquisite creations from any unnecessary material. If you are an avid motorist, then you probably have a whole collection of unnecessary tires in your garage. From tires and from cameras that you absolutely do not need, you can make several ottomans and coffee table. To create such an ensemble, you will also need two round pieces of wood and a cover made of foam rubber and fabric. wooden details you can notice plywood elements.

Are you a fan or admirer of classic furniture? A beautiful ottoman in this style can be made from an old stool, foam rubber and leather upholstery. From these simple components, an interesting classic model with short legs and a soft seat is obtained.

If you want beautiful round ottoman, then it can be made not only from a wheel, but also from an ordinary plastic bucket. For him, you will also need foam rubber, any upholstery fabric(you can use old jeans), cardboard or rattan cover.

Interesting interior items are also obtained from pompoms. They can either be soft or have a rigid frame made of slats. Such furniture is covered with a dense fabric, and on top it is sheathed with pre-prepared pompoms and thick threads for knitting.

You can make furniture for the country from pallets. To do this, you must fasten several wooden pallets and cover them with a soft seat made of fabric and several layers of foam rubber.

Country furniture is generally quite unpretentious in execution, so it can be made from plastic pipes, from an old suitcase, from a rope, and even from a wooden coil that remained after laying the cable.

Do-it-yourself children's ottoman

Making furniture for a child is a real pleasure, because there are practically no restrictions on shape, style or color. Pear, apple, ball - you can use these shapes when sewing children's puff bags.

Don't forget about your pets too - they will also appreciate upholstered furniture in handmade style. You can make an ottoman for a cat with your own hands quite quickly from fabric shreds and filler. However step-by-step instruction the manufacture of such a product for a cat is slightly different from the usual version. Cats are very fond of hiding, so make sure that the pouffe resembles a cozy mini-house. To do this, simply make a horizontal hole in the base. But the furniture for the dog does not need to be adapted - the "human" version will also suit it.

On the Internet, there are a lot of ideas for making ottomans with your own hands. For this, the most various materials. Sometimes you wonder how people came up with this? But the man is very smart and came up with a huge number of ways to save money.

Do-it-yourself pouffe from plastic bottles

And for the first master class that I want to show you, you will need simple plastic bottles. I was very surprised by this idea, and I liked it to the point of madness. Agree, we have a dime a dozen bottles, the material, one might say, is free, why not make a convenient and functional thing on your own.

Among other things, you will need thick cardboard, adhesive tape, synthetic winterizer or foam rubber, as well as fabric. The bottles must be of the same size and volume. Their number depends on the size of the future ottoman. You can make it small, or you can make it large enough to fit two people. And even the larger the area of \u200b\u200bthe upper surface, the more cargo it can withstand. In terms of strength, I can say that it is quite capable of withstanding up to 75 kg. Again, cardboard, there is cardboard, but if possible, replace it with plywood or plastic sheets, then such an ottoman will serve you for years.

Now put all the bottles together and tie everything with tape. Try to make it even and tight. Next, measure the diameter of the workpiece and cut out 4 cardboard circles. The bottom and lid will be double for greater strength. Attach them to the bottles also with adhesive tape. The basis of cooking, then you need to cut the pieces of padding polyester to size. That is, the side part and the top - a circle. The thicker the material, the better. By the way, it can be replaced with foam rubber, but it will come out a little more expensive. Glue to the base with glue. Well, then it all depends on your imagination and possibilities.

For example, a cover can be sewn from fabric, even using small pieces.

Use leather instead. It will then be a masterpiece.

Decorate with lace, ruffles or appliqué.

Felt flowers will make your pouffe an exclusive item and will not leave connoisseurs indifferent handmade. Those who love to knit can make a decor from threads.

I think it's worth taking the time and seriously fantasize to get such an original piece of furniture.

Do-it-yourself ottoman from a tire

Let's now move on to the next master class. He'll be a little lighter. This will require old tire from under the wheel. Surprised? But don't be afraid, it's not at all suburban option, although it can also be used in a summer house.

Here you will already need to prepare serious tools:

screwdriver
self-tapping screws
hot glue
Varnish and brush
Two round pieces of plywood with a diameter slightly smaller than the wheel (see photo)
And a thick rough rope

First of all, you need to thoroughly wash the tire from dust and dirt, let it dry thoroughly.

Then, using self-tapping screws and a screwdriver, fasten the bottom and the seat. Screw them at a distance of 7-10 centimeters from each other around the entire perimeter.

The workpiece is ready! It remains only to properly glue the rope, starting from the middle of the bottom in a spiral. At the end, cover the product with several layers of varnish. But you can do without it. It turns out a very simple and at the same time unusual puff of a tire.

Soft pouffe - do-it-yourself bag

The next option is a soft pouf. It is also called a bean bag chair. It is very popular among children and is most often bought in a nursery or on a balcony. It costs at least fifteen thousand. And of course, the price depends on the size. But we know that you can save a lot and make such a miracle pouf on your own.

For manufacturing, you will need two types of fabric: cotton (linen) dense and beautiful for a cover, thread, needle, sewing machine, filler.

First, draw paper patterns. You will need 4 side and 2 round ones (bottom and top). The diameter of the round parts depends on the size of the upper part of the side parts.

Transfer the patterns to the fabric and cut out, then sew all the parts, including the bottom and top. Get a ball, but don't forget to leave small hole, where it will be possible to fill the filler. It is sold in specialized stores for furniture fittings.

Unscrew the workpiece and pour the filler there. Sew up the remaining hole with a needle and thread. See that the density of the future ottoman is normal.

Then it remains to sew a decorative cover from a beautiful finishing fabric, which will give the product a proper look. It is sewn in the same way as the base, according to the same patterns. Here is such a beauty. Yes, you have to sweat, as they say, but it's worth it. So keep it up!

Do-it-yourself pouffe from a chest

What do you think of this pouffe idea? I really like these kind of things. In general, I love to create and I think that something created with my own hands is the best. After all, a person puts his soul and warmth into it.

Now I will show you how you can make an ottoman yourself from a chest, a wooden box or a box at home. My version will report from the rest by the fact that it can be used not only as a place to sit, but also as a table.

First we need to prepare necessary materials and tools. If we take a chest as a basis, great. It does not require additional processing and decor, unlike a wooden box or box. In this case, the base must be painted or covered with fabric or leather.

In order to make a pouf we need:

the basis for the ottoman - we have a chest
two sheets of plywood to fit the base cover
wood stain
varnish transparent
brush and rags
foam rubber about 4 centimeters wide the size of plywood
sintepon 10 centimeters more than foam rubber on each side
seat upholstery fabric
stapler furniture
nails or screws with a neat hat (furniture)

It is better to cut it with a sharp knife. I tried it with scissors and it didn't work. Cut off the synthetic winterizer and fabric.

Starting from the middle, we attach a synthetic winterizer from a tree with a furniture stapler.

Special attention pay attention to the corners. If you make them at random at this stage, then the pouf will look sloppy. Slowly stretch the padding polyester and fold it as shown in the picture.

So the final part of our work on the manufacture of a homemade ottoman and, in combination, a coffee table has come.

As I said earlier, we need screws with a beautiful and neat hat, as in the picture. Carnations are perfect for me. door architraves. Using them, we attach the second piece of plywood to the back of the seat.

Now we can install it on our base. Here's what happened (do-it-yourself pouf-chest).

Turn over - and we have a table for board games or tea parties.

All this is done in one evening. Simply and easily. And most importantly, it is functional, because you can store everything that your heart desires in it!

A soft and comfortable ottoman can become more than just interesting subject furniture, but also a practical thing that takes up very little space. Depending on the design style of such a product, it can fit perfectly into any room design. In addition, making and decorating the interior with your own hands is a pleasant experience that will make it possible to translate into reality original ideas for home decorating.

This household item is multifunctional. An ottoman can become a decorative element, serve as a chair and be simply convenient place to store small items. And if a frameless version was chosen for its manufacture, it will suit well as a toy. There are several options for how to make an ottoman yourself. Let's consider some of them in more detail.

Tools and materials

This example is running on standard sizes pouf - 400x400x500 mm. To design a product you will need the following:

piano loops - 2 pcs;
bar 150x40x40 mm - 1 pc;
Chipboard with dimensions 1750x2400x16 mm;
upholstery material, 50 mm thick - batting, holofiber, foam rubber or synthetic winterizer;
furniture rollers - 4 pcs;
thick fabric for decorative upholstery.

To make a pouffe, you will need the following tools:

wood glue;
ruler;
wood screws;
screwdriver;
pencil;
construction stapler;
hacksaw with fine teeth;
a hammer.

Do-it-yourself ottoman: step by step guide

Initially, you need to make markings on the work surface. Make these blanks:

2 rectangular segments 370x400 mm - for the walls of the pouffe;
2 rectangular blanks 370x370 mm - for the side parts;
1 square fragment 400x400 mm.

Then proceed to cutting out the fragments using a hacksaw.
Saw the existing timber into 4 pieces so that the length of each is 370 mm.

Assemble the box from all the cut pieces. You should get a frame with a height of 370 mm.
Fix the beams with wood glue inside corners designs. This will give it rigidity.
Fix the corners of the frame with self-tapping screws with outside. Optionally, you can strengthen the structure with metal corners.
Then apply glue to the bottom of the box, as well as to the ends of the bars.
Glue the bottom and let the frame dry.
Then strengthen the structure with self-tapping screws, screwing them along the ends of the box.
Start making the cover. Screw 4 stop bars along the inner sides of the perimeter.
Make sure that the stiffening ribs are installed correctly and do not prevent the lid from closing.

12. Then proceed to the upholstery of the ottoman. In this process, rely on your imagination. Foam rubber, batting, holofiber or synthetic winterizer are optimally suited as upholstery materials.

13. The product is ready! This ottoman in the interior of the home will not only decorative element, but also a functional cabinet for storing things.

Pouffe from plastic bottles

As a material for a home ottoman, objects that are unusual at first glance are suitable. For example, plastic bottles. This is the most affordable way to build a home pouffe, which is highly decorative and practical to use.

Work materials

For the workflow you will need the following materials:

bottles with caps - 40 pieces;
scissors;
foam rubber or synthetic winterizer for lining;
tape wide;
needles and threads;
knitting needles or crochet hook;
yarn;
stapler;
decorative fabric.

Manufacturing process

To build an ottoman from bottles, you need to take plastic containers(the lids must be tightly screwed in) and using adhesive tape to connect them in several layers.
Bottles can be fastened all at once, however, for greater product strength, it is better to fix them in packs of several pieces. And then the resulting sections are once again fastened together.

3. On next step you need to make a pattern of the bottom of the cardboard. To do this, attach a blank with a circumference of 400 mm to cardboard and circle with a pencil.

4. Based on the resulting pattern, you need to cut out two blanks.

5. Then lay them on both sides of the ottoman and secure with adhesive tape.

7. Using a construction stapler, nail foam rubber to the cardboard frame.

8. Foam pads are placed on the product and stitched together.

9. Start sewing the cover. Any thick fabric will work for this.

10. On final stage it remains to tie the top and side parts of the ottoman, which at the end must be sewn to the bottom.

11. The ottoman is completely ready.

Making an ottoman from a reel

diversify home environment detail of a classic or rustic style you can make a sofa ottoman using a coil. This option will allow you to make a durable product that can be decorated to your liking. Thanks to this, the pouffe will become an original addition to any room interior.

Materials and tools

Before starting work, you need to prepare the following:

coil made of wood or chipboard;
Styrofoam;
glue;
foam rubber or batting;
the cloth;
cardboard;
construction stapler;
drill;
sewing machine.

Step by step manufacturing process

On initial stage you need to cut out parts from the foam that correspond to the size of the top of the coil.
Use glue to fasten them together.
Next, to work with fabric, batting and foam rubber, we make a template. To do this, draw a circle on paper, leaving "allowances" for the seams.

We process the wooden circle with glue and fasten the pre-cut circle of foam rubber.

After that, we wrap the structure with cardboard, fixing it with a stapler and adhesive.

Then wrap the pouffe with batting and secure from the bottom with a stapler. Take all the necessary measurements, remove excess pieces and proceed to upholstery with fabric.

After that, we sew a fabric cover and put it on an ottoman. Please note that the decorative upholstery should be stretched, but not too tight.
Finally, drill holes and attach legs to the plates.
The work is over.

Multicolored fabric ottoman

An ottoman that combines different colors will help fill the interior with colorful shades. Such a household item will allow you to bring into the overall design of the room bright accents and make it more original.

Work materials

To create such an original interior detail, we need to prepare the following:

pieces of fabric of various, but matching colors;
lining fabric;
filler material;
needle, thread;
sewing machine;
Buttons are large enough.

Let's start manufacturing

The first step is to create a pattern. To make it, you need to draw a circle with the diameter of the future product. The resulting circle must be divided into parts. First by 4, then each by 3 more fragments.
Using these details, we cut out pieces of fabric in the form of petals, leaving two centimeters for sewing.
We perform the same manipulation with the lining fabric.
The resulting elements must be sewn on the sides.
Proceed to the construction of the lower part of the future product. It is advisable to use a dense fabric for this.
From the wrong side, sew the bottom of the fabric pouf to the top. In this case, one “petal” must be left unsewn.
Then you should turn the fabric inside out and fill it with the prepared material.
Sew the product completely.
Mask the seams with large buttons, sewing them in the center of the ottoman from above and below.

Pouffe in the form of a ball

Bedroom ottomans will diversify and complement any decor. In addition, for the manufacture of this piece of furniture, the simplest and most affordable materials will be required.

Preparation for work

To make such an ottoman, you need to prepare the following:

polyethylene;
thread with a needle;
sewing machine;
fabric of two colors;
fiber filling material;
graph paper.

Execution steps

Using graph paper, you need to make a pattern. Any round object, such as a large ball, is suitable for this.
We measure the circumference of the ball and divide the obtained data by 2.
Then you need to divide the resulting number by 5 so that the 2 extreme fragments and 3 parts in the middle are the same size.
At the output, we get the diameter of the circle and the width of the stripes.
Then you should draw a line below based on the resulting width of the parts.
Cut out the bottom of the polyethylene. We impose it on the first strip and fasten the edges with adhesive tape.
Similarly, we obtain the detail for middle lane. We translate the received details on paper.
We make a pattern of a future product from different fabrics colors, while leaving 1 cm for the seam.
We sew the parts together, forming uniform stripes.
At the next stage, strips with round parts should be fixed in series.
We leave the end of the middle strip unsewn and fill the product with material prepared for this purpose.
Sew up the remaining hole with an inconspicuous seam.
The ottoman is completely ready for use.

Making an ottoman from a sweater

Enough unusual solution in the interior there will be a pouf made of a sweater. This piece of furniture will fit into any home design, especially for decorating a child's room. Consider detailed master do-it-yourself ottoman class.

Materials and tools

To complete this work, you need to prepare the following:

old wool sweater;
fabric for sewing a cover;
felt;
expanded polystyrene;
threads;
scissors;
needle.

Step-by-step instruction

We take felt and cut out a circle of the diameter we need from it. This will be the bottom of our ottoman.
Then prepare the sweater for work: wrap it in inside sleeves and sew up the holes.
Next, you need to sew a felt circle to the bottom of the sweater.
At the next stage, it is necessary to cut a rectangle measuring 50x70 cm from the fabric.
We sew a cover from it, while making a hem on top. It will serve us for a lace with which we will tighten the neck of the cover.
The resulting cover should be placed in a sweater and filled with polystyrene foam.
The last step is to tighten and tie the lace.
The pouf is ready to use.

Conclusion

Of the above methods of making ottomans, you will surely find the most suitable one for you. Such comfortable attributes of the interior carry not only practical, but also decorative functions. Ottomans with a back or frameless will make your life more comfortable and decorate your home environment. In addition, the manufacture of interior elements on your own is a very suitable area for creative implementation.

A video tutorial on how to make a pouffe with your own hands is presented below:

More than a decade ago, ottomans were very popular. Today, these elements of the interior are back in fashion. On the market, this multifunctional product is presented in a large assortment. But, if desired, the ottoman can be made with your own hands. To do this, you just need to select the type of construction and prepare the necessary materials and tools. So, how to make an ottoman with your own hands? What will be needed for this?

Puffs made of chipboard are very popular. Such designs can withstand heavy loads and can be used as a full-fledged stool. They may also have different design features. This may be a hinged lid design or other options. In any case, for building simple ottoman from chipboard you will need:

Chipboard sheet. Its size should be 240x175x1.6 cm. You can also use plywood. Its thickness should not be less than 1.3 cm. This will be enough for adults to use the ottoman.
A beam with a section of 4x4 cm and a length of 150 cm.
If desired, the product can be made on wheels. In this case, you need 4 rollers.
If the ottoman is made with a hinged lid, then 2 more loops will be needed.
Foam rubber or synthetic winterizer is used as a filler.
For upholstery fit tapestry or other dense fabric.

As for the tools, to make an ottoman with your own hands you will need:

a hacksaw with fine teeth or a jigsaw, which will allow you to cut chipboard or plywood with high quality;
a hammer;
self-tapping screws;
screwdriver or screwdriver;
construction stapler or furniture studs with wide hats;
wood glue.

To simplify and speed up the process, you can use a box with legs. It is made from bars, which are interconnected by self-tapping screws. But what could be better than a handmade square ottoman on wheels with a hinged lid. Thus, the design will be used not only for sitting, but also for storing various small things or toys. A step-by-step master class will show how easy it is to organize the production of such furniture at home.