How to recover an accidentally deleted stock recovery. Installing CWM Recovery on Android: methods for every taste

This time I will show you how to install stock firmware on your smartphone or tablet Samsung Galaxy, that is, restore the state of the new device. This method will also allow you to revive your gadget after an unsuccessful installation of custom firmware or get rid of problems with the operation of the device. You can also update your device to latest version Software if you can’t wait for an over-the-air update. Everything is completely safe!

This method involves using the convenient Odin utility for Windows. Don't worry if you're not familiar with her. Thanks to step by step instructions Below, you will learn everything you need to successfully restore via Odin. It is worth noting that all data stored in internal memory The devices will be erased, so save them to your computer before you begin. You can also backup SMS, contacts, media files and more by checking our guide.

How to prepare for the Samsung Android device recovery process:

How to restore stock firmware on any Samsung device:

Step 2: Translate mobile device to Download Mode. To do this, turn it off, and then press the buttons one by one “Volume Down”, "Home" And “Nutrition“. Then press the button once “Volume Up”, to continue.

Step 3: Connect the gadget to your computer via a USB cable.

Step 4: When a blue light appears in front of the connected port in the Odin program, click on the button "AP" and select the firmware file that you should have downloaded in advance.

Step 5: The Odin utility takes a few minutes to check the firmware. When it is ready, press the button "Start", which is located at the bottom of the window.

Step 6: After the process is completed, the device will reboot automatically.

Step 7: In a few minutes you should see the initial setup screen, where you need to select the interface language, connect to the network, add an account, and so on.

That's all! Now your gadget has stock software installed that will receive official updates by air.

Every Android mobile device comes with additional diagnostic software called recovery (recovery or recovery mode). The operating principle and concept of recovery on Android is reminiscent of the BIOS in computers - this software is also installed separately from the operating system and performs diagnostic functions. What is recovery in Android - read our article on Trashbox.

Android stock recovery

Combinations for calling recovery on popular devices:

• How to enter recovery on a Samsung Galaxy: with the gadget turned off, simultaneously hold down the Power, Home and Volume Up buttons. Press until you enter recovery.
• How to enter recovery on LG: with the smartphone turned off, simultaneously hold down the Power and Volume Down buttons. Press and hold until the LG logo appears, then release, and then press these two buttons simultaneously again. The recovery login menu will appear.
• How to enter recovery on Google Nexus: With the device turned off, hold down the Volume Up and Down buttons, and then hold down the Power button. “Start” and a selection menu will appear. Use the volume down button to select recovery and press the power button to boot into this mode.
• How to enter recovery on most Android devices: on many devices from little-known or even large manufacturers, there is a single way to enter recovery - pressing the Decrease buttons or increase the volume simultaneously with the Power button.

Stock recovery in Android

Even stock recovery allows you to install firmware, OTA updates or restore the operating system to factory settings. However, in stock recovery you cannot install third-party firmware from the community - it is designed only for updates and firmware from the official development company.

Custom Android recovery

Interface and features recovery TWRP

The capabilities of popular custom recoveries are much wider than those of stock ones. For example, TWRP (Team Win Recovery Project) allows you to create complete backups of the operating system (NanDroid). This way, it is possible to kill the system and return it to a working state, even if it does not boot. You can also install third-party firmware, return the firmware to factory settings, mount partitions, use the terminal, and even change themes. TWRP recovery has . It provides access to all recovery functions (installation, backups, recovery) without the need to reboot into the mode itself. The main feature of TWRP is its user-friendly touch interface with theme support.

How to install custom TWRP recovery on Android - coming soon to Trashbox.

Clockwork Mod recovery interface

Another popular custom recovery for Android is Clockwork Mod. It can be installed using the application, but only if you already have it on your device. CWM can create and restore backups, install firmware and perform a hard system reset. The main feature of the Clockwork Mod recovery is additional functions for installing custom firmware. Unlike TWRP, CWM's interface is not as convenient and beautiful.

How to install custom recovery Clockwork Mod on Android - coming soon to Trashbox

The beauty of TWRP and CWM is also that they are open to the community. Anyone can take the code from these recoveries to port them to officially unsupported devices.

Installing custom recovery on Android

What should you do if your Android smartphone suddenly starts to freeze and behave as if it wanted to live its own life? How to reflash Android? This question is asked by many users of modern gadgets of various brands - from top-end Samsung and Sony to the Chinese Xiaomi, which is now gaining popularity (more often in colloquial speech- “Xiaomi”) and “Meizu”.

Possible solutions to problems

One of the most simple tips The device settings will be reset to factory settings. Indeed, in this case, no third-party intervention is required - all settings and resets are done at the software level. But this trick will only work if the smartphone’s malfunctions are caused only by software and clogged memory. After resetting the settings, and in frequent cases erasing the content, the device turns on like new.

What is "Recovery" and what is it eaten with?

Many immediately give up their positions and throw out the white flag, rushing to contact service centers. But any experienced user will tell you that this is not worth doing. After all, you can save yourself extra nerves and money by just following the simple steps from these instructions.

“Recovery” is a smartphone software based on the Android OS, which is something like a “BIOS” on a PC. That is, using “Recovery” you can completely reset your smartphone to factory settings, you can also install operating system updates and simply flash it. When purchasing in a store, the user most often receives a device with a factory “Recovery” menu, which is slightly limited in functionality and will not allow you to successfully flash the operating system.

If we talk about “custom” (translated from English custom - “made to order”) “Recovery”, then it will allow you to more fully “communicate” with the phone system, make backup copies of firmware and restore them, as well as make a more complete and deep reset of the device.

How to enter "Recovery"

To flash your device via Recovery, you must first get into this very menu. This couldn’t be easier to do, especially since on many devices the input combination is exactly the same. So, if the smartphone has a physical central button or a Home button (most often found in older Samsung and LG devices, but it may also appear in more modern devices), you need to hold down the “Home” and “Volume +” buttons with the gadget turned off, and then, without releasing them, press the power button.

The device will turn on in the desired mode. If you have a more modern device without a physical Home button, you need to repeat the process described above, but using only the Volume + button and the Power button. If the desired result was not achieved, you should refer to the extended list of ways to enter the “Recovery” menu for different manufacturers.

What else will you need?

In order to understand how to reflash Android, you first need to download the firmware for your device. Most often, firmware files are hidden from public view for security purposes and to protect the manufacturer’s data. That is why ordinary users create backup copies of their operating systems and form databases of stock firmware from them, links to which can be found on specialized sites. It is the firmware file itself, located in the archive with the *.zip extension, that you will need to understand how to restore Android using Recovery.

There are also times when you are tired of the old stock firmware and want something new. That is why there are always craftsmen who create custom firmware, “cutting out” the unnecessary from them or, conversely, adding something new. In such cases, it will not be possible to use the standard “Recovery”, and here those same custom CWM Recovery (ClockWorkMod Recovery) or

Installation or TWRP

It is not necessary to install Recovery on Android via a computer; most often, on the contrary, it is easier to use the stock one. All you need to do is download the necessary file, again located in an archive with the *.zip extension, and place it on the external flash card of your smartphone.

After that, going to the stock “Recovery”, you need to select the “Apply update from external storage” item and in the list that opens, select the same file with the custom “Recovery”. After confirming your choice, the installation process will begin, after which the device will prompt you to reboot. The process is complete.

How to flash Android via Recovery

Moving directly to the process of installing the firmware itself, I would like to say that all unofficial files of the Android operating system, created directly by users of certain devices, should be installed at your own peril and risk. If, however, the decision is made to install a non-native version of the software, you should make sure that the firmware is “written” specifically for the phone that you plan to reflash.

If we are talking about stock firmware, then you should not bother installing CWM Recovery or TWRP. All manipulations that need to be done are limited to downloading the factory firmware file and placing it on an external memory card. After this, the process is similar to installing a custom Recovery. That is, you need to go to the stock “Recovery” menu, select “Apply update from external storage”, then specify the firmware file directly and confirm the action. After the process is completed, you need to take one more step that will help avoid freezes and glitches when turning on and operating the device. Immediately after the firmware is completed, you need to select the “Wipe data/factory reset” menu item and confirm the action. This will clear information about previous software and files that were present on the device before the firmware process.

After completing these steps, you must select the “Reboot system now” menu item. The device will reboot and the process of setting up the smartphone from scratch will begin. If the power-on process is delayed and the device logo “hangs”, it is worth remembering whether the settings reset item was performed after flashing.

Custom versions of Android

How to flash Android via Recovery is, in principle, clear. It remains to figure out what to do with OS versions written directly by device users. The answer is simple: the process needs to be repeated, performing the same manipulations in custom “Recovery”. The only difference is that the firmware file itself can now be placed not only on an external memory card, but also on the internal memory of the device. This adds convenience in the event that a flash card is simply missing. In this case, you will have to select the “Apply update from internal storage” option.

It is also worth noting that in CWM Recovery and TWRP the “Wipe data/factory reset” item has been replaced with two separate items: “Wipe data” and “Wipe cache”. After installing “Android” through “Recovery” (namely, the custom version) has succeeded, in the modified ClockWorkMod or TeamWin menu you need to select the “Wipe Dalvik cache” sub-item, which will significantly increase the chances of successfully turning on the device with the new operating system.

Restoring stock firmware

If you don’t like it or don’t like it, you can always return everything to its place. Many people ask the question: “How to restore Android through Recovery, namely the stock version?” The answer lies in the point above. Roughly speaking, returning everything to normal occurs in the same way as making the initial changes.

All you need to do is download the firmware from the manufacturer to a flash card or internal memory, then select the appropriate “Recovery” menu item and do a complete reset of settings/content. In principle, nothing complicated.

It seems that understanding how to flash Android via Recovery is not so difficult. But if some points are unclear, or you are not confident in your knowledge, it is better not to get involved with such processes. But even if something doesn’t work out, you can always restore the device’s firmware through the corresponding menu item. The main thing is to make a backup copy before flashing Android via Recovery. To do this, you will need a custom “Recovery” and a little patience, because the process of backing up the firmware takes a lot of time.

If something goes wrong, you can always contact knowledgeable people. At least in an authorized service center will definitely help. The main thing is not to lose heart and move forward confidently. This is the only way to achieve any results. Good luck with the flashing!

Our site has already managed to tell you before. Let us remind you that this is the so-called recovery menu, with which the user can, for example, reset all data or reflash his gadget.

There are two types of recovery menu (Recovery Mode): stock and custom. Stock is the same type of Recovery Mode that is installed by default. When flashing, a custom Recovery Mode can be installed.

And now - the most interesting part. It's about on how to enter the recovery menu. And here an interesting quest may await the user - various devices This mode can be launched in different ways. How exactly? To begin with, we will tell you about universal method, and then we’ll go through specific brands of smartphones and tablets.

Universal mode

What's good about it? The fact that it is relevant for most modern devices.

• Turn off your device by pressing the Power key, then in the menu tap on the “Turn off” touch button.

• Once the device is completely turned off, you will need to press the Volume Down key and the Power key at the same time.

• Or - press the volume up key and the Power key at the same time.

• When the device starts up, you can release the Power key.

This is the most convenient way of all and the easiest to launch the specified mode.

How to enter Recovery on Samsung?

For new models: press the volume up key, Power and the central Home key.

For older models, a universal method is used: pressing the volume up or down key, as well as Power.

Google Nexus

Volume down key + Power.

This will load Fastboot mode, and from there you can switch to Recovery Mode.

LG

Classic method: Volume Down + Power key. Please note that the volume up and down buttons on LG smartphones may be located on the back.

Xiaomi

Volume up + Power.

Meizu

Volume up + Power.

Please note that Meizu has its own menu with which you can reset the settings or update the firmware. This is not exactly a recovery menu.

HTC

Or increase volume + Power:

Or Volume Down + Power:

Huawei

Volume up + Power.

Or volume down + Power.

Motorola

First, you will need to launch Fastboot Flash Mode, for which press the Volume Down + Power button.

In the menu that loads on the screen, go to Recovery Mode using the Volume Down and Volume Up keys.

ASUS

Classic option. Either Volume Down + Power:

Either Volume Up + Power:

Sony

There are several ways.

The first one is simple: Volume Up + Power.

The second is a little more complicated: the Power button, then Up, the Sony logo appears and Up again.

Third method: Volume Up + Volume Down + Power.

How to enable Recovery Mode via terminal?

Download the Terminal Emulator application. Launch it, provide root rights (required).

Write the reboot recovery command.

The gadget starts in Recovery Mode.

How to enable Recovery Mode via a computer?

Install Adb Run, as well as the necessary drivers. Connect the device to the computer, launch the command line on the computer, enter the adb reboot recovery command and press the Enter key.

Android system has great benefits for users, since this operating system is always open to changes and improvements. The best thing here is that you can easily tweak and optimize your Android device to improve speed, extend battery life, or even replace stock software with custom or unofficial software. But in order to do this, you must first carry out additional operations that will provide access to the internal system of the smartphone or tablet. As you will see, each task will require the use of a recovery image; so in this guide, we will tell you how to easily enter recovery mode manually on rooted and non-rooted android phones.

All android smartphones and tablets have a stock recovery image pre-installed on their systems. Stock recovery can be used for numerous operations such as: installing applications from an SD card, backing up data, performing procedures Maintenance and so on. But when you are dealing with unofficial methods such as kernel, stock recovery is useless. In this case, you should replace the stock restore with a custom one, an operation that usually requires root access (though not always).

Custom recovery images have great features and options that can be used by android users trying to customize their phones. So, these tools are only useful if you want to perform complex operations on your phone/tablet, otherwise replacing the stock recovery image with a custom one will be pointless. As mentioned, custom recovery must be used when attempting to update to beta, unofficial or custom firmware, or when installing custom kernels - after which you can upgrade your smartphone or tablet to improve speed or to upgrade battery life.

The most commonly used custom recovery images for Android are CWM and TWRP, the latter of which is a touch version of the former tool. There are many other recovery apps that can be installed on your android system, but we recommend the above-mentioned tools for you.

As mentioned above, when trying to install a custom recovery, root access may be required. In this case, you first need to unlock your smartphone/tablet (), then install the application and finally come back here and learn how to boot your Android device into recovery mode. Keep in mind that rooting your phone will void the warranty and to restore it to its original state you will have to roll back to stock firmware or update to the official release software android.

This guide is suitable for both rooted and locked Android smartphones and tablets, which means you can learn how to enter recovery mode without any problems. This method will work on almost all android devices, so this is a universal guide. So, whether you need to enter a stock recovery or a custom recovery (CWM or TWRP), use our instructions and find out how to do it.

Typically, to enter recovery mode, you need to press a combination of buttons on the phone. First, you need to turn off your device, wait for a few seconds, and then press the Power and Volume Up buttons simultaneously for a few seconds. After this, the recovery mode should be displayed. If this doesn't work for you, follow the instructions below.

Enter recovery mode on rooted Android devices

1. This method couldn't be easier. Consists of a small number of steps. Download the Quick Boot app.
2. Install this application on your phone or tablet.
3. Launch the application.
4. In the menu you will see the following items: Recovery, Reboot, Bootloader and Power Off. Select Recovery.
5. Your device will now reboot into recovery mode.

Enter recovery mode on a locked (non-rooted) Android device

1. To successfully complete these steps, you will need access to a computer or laptop.
2. You will also need a USB cable.
3. Your phone must have USB debugging enabled.
4. The Android SDK must be installed on the computer.
5. Connect your phone to your computer using a USB cable.
6. Find the Fastboot folder on your computer.
7. Open a command prompt.
8. In the command line of your computer, type “adb reboot recovery”.
9. After this, the phone will go into recovery mode.

Excellent, our training is complete. Now you know how to enter recovery mode on rooted and locked Android devices. Now go ahead and use the recovery menu to install custom ROMs or perform other complex and powerful operations.

Booting a phone or tablet into recovery mode is a very common action when you need to install a new mod or upload firmware. Most Android users don't know how to get into Recovery Mode on their device.

We buy a smartphone or tablet computer, use it for a few days, and then look for a good custom firmware, enjoy the gadget again for a few days, and again start looking for a better firmware, and so on. To do this, you need to boot the device in recovery mode. There are several popular applications that allow you to enter recovery on Android, and we will try to tell you about them.

How to enter Recovery on Android without additional applications

For example, in order to boot into recovery mode on the Samsung Galaxy S 9000, which does not have camera keys, you need press the volume up button + power button + home button (located in the center). That is, turn off the phone and hold down the “Volume Up” + “Home” button and press “Power” until the screen backlight comes on.

On Motorola Droid X entering recovery mode is done differently:

1. Turn off the phone.
2. Hold down the Home button and press the Power button until the Motorola logo appears.
3. Release the "Power" button and continue to hold "Home" until the exclamation mark appears.
4. Release the Home button and press the Search button once.

For other mobile devices, you can try to enter recovery mode using the following scheme:

1. Turn off your device.
2. Press the Volume Up button and the Camera button until the screen lights up.

Meanwhile, there are several popular applications that allow you to enter recovery mode without dancing with a tambourine. Our next chapter is about them.

Applications to enter recovery mode

There are several useful applications that, among other various functions, allow you to get into recovery mode. Unfortunately, these applications are not universal and support certain models of gadgets. Here short list what such an application can usually do:

• Install– installation of a new system kernel, installation of new firmware and various system programs.
• Restore/B ackup– saving and restoring the system, very useful. If problems arise after updating the firmware, you can always roll back the system.
• Wipe/Format– cleaning internal memory (Wipe) or formatting the entire system (Format). Formatting is rarely used; usually it is enough to clear the memory. Another feature of Android is the “Dalvik-cache” and “Cache” system partitions, which are best cleared before flashing a smartphone or tablet. There are also “Data” and “Factory Reset” sections, cleaning which will remove all installed applications and system settings, and return the OS firmware to its original state. The “System” section contains the firmware itself.
• Mount- the function of creating and deleting partitions is, in principle, practically unnecessary.

So, the first such application is ClockWorkMod Touch Recovery. It looks like this:

The advantages of this application include the touch menu (this does not apply to the regular version CWM, where there is no touch menu). Ability to control the application using regular buttons. This option is very useful if something goes wrong with the sensor. You can create a system ext partition on a flash drive (memory card).

The disadvantages of this program include some complexity of installation. CWM You may have to install it via Mobile ODIN, fastboot or RomManager. There is also another small minus. If you want to make a backup copy, then CWM will save all system data; you cannot choose between the Boot, Data and System sections. The following useful application is 4EXT Recovery. It looks like this:

This application can work with an external memory card, which can be connected directly from the program. It can also select the desired partition for the backup, and the application will show its size after creation. By using 4EXT Recovery you can delete or add a Cache section. The application also supports archiving most partitions into a .TAR archive. With the exception of Boot and Recovery. Unfortunately, there is no touch mode, only phone or tablet buttons. The last application of our article is TWRP Recovery . The ascetic appearance is compensated by good functionality.

The program has an intuitive, simple interface. Allows you to select partitions for backup and give the backup archive a name. Allows you to see how much free space remained on the media. TWRP Recovery also knows how to work with an external memory card and supports encryption. Unfortunately, there is no touch mode. That's all, if you have questions, ask in the comments, indicating the model of your gadget!

Each Android device has a specific mode called Android Recovery. It is used to restore the correct operation of the phone. In it, you can reset all the settings of your smartphone back to the factory or originally installed ones. In addition, this mode is used to flash the phone's firmware and obtain Root rights. You will learn further in this article how to enter the recovery menu on Android.

The methods for getting into recovery depend on the brand and specific model of your phone. The first thing you should do is rummage through the instructions or search for information about the exact model of your phone on the Internet. Here we will indicate several relatively standard ways to open the recovery menu for different devices. But first you need to do something else.

The first thing is reinsurance. Making a backup

Backup - from the English "back up" - is the common name for the process of backing up data on your phone. Why do this? If something goes wrong and your data disappears, you can still restore it. What could go wrong? Sometimes flashing a phone or opening access to root rights, instead of improving the functioning of the system, on the contrary, “breaks” it. Therefore, if you are interested in how to enter the recovery menu on Android in order to upgrade it in the future, make a backup first.

Most often, this option is hidden in the "General Settings" section. You will most likely see the message "Backup and reset". As you can see, if the phone is working properly, it is not necessary to go to the recovery menu to reset the settings. You can do this during normal operation.

How to enter the recovery menu on Android: basic button combinations

If you need recovery mode because your phone refuses to behave well, then, naturally, we will no longer be able to reset the state through “Settings” to restore the system. Usually, in order to get into recovery, the volume buttons and the power button are used.

The combination depends on the model and brand of your phone. Most likely, you will need to press the following at the same time:

• "Volume Up" and "Power";
• "Volume Down" and "Power";
• "Home" (button at the bottom of the screen) and "Power";
• both volume buttons, “Power” and “Home” (obviously, the creators of Samsung assume very virtuoso finger skills from the owners of their devices).

What is Android Recovery?

After you have entered recovery, most likely you will see the picture shown in the photo.

This is an example of a standard recovery menu preinstalled on the device. Depending on the model, Android version and brand of your smartphone, it may look different. You will navigate through this list using the volume keys, and use the power button as a confirmation button. This list contains the following functions:

Custom recovery menus

If you downloaded a special recovery menu to your phone, then it, unlike the preinstalled or “native” one, will be called custom. The main reason for the existence of alternative recovery menus is the more advanced functionality of custom versions and various additional features, for example, installing unofficial firmware.

The most popular custom menus are Clockwordmod Recovery and Team Win Recovery Project. If the first one is similar in control to a regular recovery menu - using the volume and power buttons, then when the second one is running, the touchscreen remains active. As in the main mode, you control the process by touching the buttons on the screen (see photo below). This is certainly convenient if the screen works without errors. If the “glitch”, because of which you need to go into recovery, is in the screen, difficulties will arise.

USB debugging: how to enter the recovery menu on Android from a computer?

In order for you to be able to enter the recovery menu of your phone from your PC, first take the time to find and download a special program to your computer that makes this possible. But even before that, look for the “USB Debugging” option in the settings of your device - you will find it in the section for developers. Then download AdbRun on your PC. And from there, knowing the commands for the console, you can control some functions of the recovery menu.

Now, if suddenly the recovery menu on Android does not open in the usual way on the phone itself, you can connect the device to your computer using a USB cable and control it from there.

Leaving gracefully: how to leave the menu

If you entered this mode out of curiosity, and now you are worried about how to exit the recovery menu on Android so that it does not lead to irreversible changes to your data, let us dispel your worries.

Most often, exiting is much easier to do than entering the menu. In most well-known recovery menus, this item will even be the first in the list - Reboot System Now. Even if you can’t do this, you can cheat and do what all users usually do first of all if the phone “glitches”: reboot using the power button, remove and reinsert the battery, or in the end just leave the phone to discharge - later it will turn on again in normal operation.

20.04.2016

Nowadays, almost everyone has a smartphone, and when it comes to mobile devices on operating system Android, many of their owners show a desire to become a more advanced user. In this case, the owner of the smartphone, sooner or later, will definitely be faced with the need to install a third-party recovery), after which he will be able to perform many operations with his device that were previously inaccessible.

By installing a third-party (custom) recovery on a mobile device, you can create backup copies of data, install updates and all kinds of add-ons, install third-party firmware ( ROM). Below we will tell you about that, and directly from your smartphone. As an example, we use the most popular recovery - this (CWM) .

Note: every mobile device running an operating systemAndroid, has its own recovery mode, which is called “" The problem is that recovery in its standard interpretation it has rather narrow possibilities. All that can be done with a smartphone using the standard recovery mode is its factory reset And installing system updates.

Standard recovery, available in Android smartphones by default, does not suit advanced users with its capabilities. It is for this reason that most of them resort to installing alternative from third party developers. This is not surprising, because the advanced recovery mode has many more functions and capabilities in its arsenal.

As mentioned above, among all existing third-party recovery the most popular is Clockwordmod. However, before you start installing it on your Android smartphone, we recommend that you familiarize yourself with the capabilities that it recovery provides:

• Installing unofficial firmware (ROM) on a mobile device;
• Installation of official and unofficial system updates;
• Installation of all kinds of add-ons and fixes (fixes);
• Connecting a smartphone to a computer via USB as a removable storage device;
• Creation backup the entire firmware or its individual parts;
• Restoring data from previously created backups;
• Connecting a smartphone to a computer via USB in ADB mode;
• Clearing data, mobile device cache, deleting applications (including system ones);
• Resetting the mobile device to its original state (out of the box);
• Clearing battery statistics;
• Formatting a memory card, creating partitions on it;
• Memory substitution.

Agree, these capabilities are amazing, and for this it is clearly worth installing a third-party (alternative) recovery on your Android smartphone, especially since the list above presents only the most popular features, but not all.

There are several installation methods, and the choice of the appropriate one is determined by the model (manufacturer) of the mobile device. In this article we will consider two of them.

Method one– simpler, so cope with the task installing alternative recovery Even inexperienced Android smartphone users will be able to do this this way. Moreover, this method installations Suitable for the most popular mobile devices.

Method two– more complex, suitable for advanced users and, more importantly, covers a much wider range of mobile devices.

Installationvia the appRom Manager

This method recovery installations is to use special application, which simplifies the firmware procedure. It is noteworthy that the authors of this utility are themselves developersCWM.

You can download and install this application at Play Market by going to this link. to use Rom Manager on your smartphone, you must have superuser rights. You can read about how to get them in .

Installed and launched Rom Manager, you will see a window on the screen of your mobile device, which is divided into several sections. On at this stage We are interested in the section " Mode».

Select " Setup", and then go to the "" section.

Next, you must confirm the model of your smartphone by tapping on its name in the list. Now you need to confirm your intentions, after which the downloading of the files necessary for recovery installations. The corresponding line with the loading scale will appear on the screen of your smartphone.

When the download is complete, the application will ask you to provide it with superuser rights, then CWM will still be installed on your mobile device.

To check if everything worked out for you is quite simple: go to main screen Rom Manager, from where you can reboot into recovery by selecting the appropriate section " Load mode».

We are done with the first method, you installed recovery on an android smartphone viaRom Manager, and now we will talk about how to install recovery on android via computer.

Installation using modeFastBoot

The method that will be described below is more complex and in order to use it, you must have good level computer knowledge.

Important: installation via computer Thus, it is recommended for advanced users who do not need to describe each action in detail and explain it in detail.

You will need: computer running Windows, originalUSB-cable for connecting a smartphone, as well as official drivers, which are necessary for the correct detection and operation of your mobile device with a PC. You can download drivers for your smartphone using one of these links:

Now you need to install the platform on your PC Android SDK, which can be downloaded from this link.

After installing the utility, you can use it to install additional packages necessary for the correct operation of this tool.

The final stage of preparation for installation is directly downloading the file itself recovery, which you can “get” from the official website of this project.

After downloading the file, rename it to “ update. img" and move it to a folder called " platform— tool", located in the directory where you installed Android SDK.

Having installed and configured all the necessary software, downloaded all the necessary files, you can go directly to installing recovery on android via computer.

1. In the settings of your smartphone, turn on the “ Debugging byUSB", for which you need to open the tab " Developer Mode».

Once done, connect your mobile device to your PC.

1. Press a key combination on your computer keyboard Win+ R and enter the command cmd and press " OK».

A command line will appear in front of you:

In the line with the directory address, you must indicate the path to the folder " platform— tool" To do this you need to enter the appropriate command, for example:

C:\Users\ Name user \AppData\Local\Android\android-sdk\platform-tools

1. Type at the command line adb devices, after making sure that the computer saw your Android smartphone and identified it correctly.

1. Now enter adb reboot devices, wait until the phone reboots and enters bootloader mode ().

1. Next, you need to check whether there is a connection between your PC and your mobile device, for which you need to enter the command fastboot devices.

The next step is to enter the most important command: fastboot flash update. img.

If you did everything correctly and the process recovery installations successful on your smartphone, you will see a corresponding notification.

To enter recovery, you need to simultaneously hold down the device while the device is turned off. power button and volume up key. By holding them and waiting for them to turn on, you will enter mode.

Actually, that's all, now you know how to install recovery on android via computer. However, it is worth understanding that this method although he supports a large number of models of mobile devices, but not all.

Warning from CompDude : it is important to understand that installing third party recovery, like phone firmware, like any other complex manipulations with a smartphone, can lead to unpleasant consequences. In the worst case, your mobile device may turn into a “brick”, which may not even be restored in a service center. Remember, everything you do is done entirely at your own peril and risk; the administration of our site, as well as the developers of third-party software, are not responsible for this.