home-Ramps-How to make souvenirs on wire rings. How to make a wire ring with your own hands? How to make a champagne wire ring with your own hands

How to make souvenirs on wire rings. How to make a wire ring with your own hands? How to make a champagne wire ring with your own hands

Many people like to decorate their fingers, and on store shelves you can now find rings for every taste. But you and I know that there is a very special magic in things made with your own hands.

In this master class, I suggest you make a laconic but cute ring using the wire wrap technique. Wire wrap literally means “twisting a wire” and combines various techniques for creating jewelry from simple ones, like our ring, to very complex and intricate literally words. This direction is now actively gaining momentum, although it has not yet acquired a generally accepted Russian name.

So, to produce a ring we will need:

  • needle file
  • platypuses, it is desirable that they are smooth at the ends, then they will not damage the wire
  • wire cutters
  • a cylindrical object with a diameter slightly larger than a finger (in my case, a marker worked perfectly)
  • a piece copper wire about half a meter long and about 0.8 mm in diameter (generally speaking, you can take any wire, as long as it is soft enough: brass, regular knitting, or special from hardware stores)

Making a ring from twisted wire

First, we take our improvised crossbar (that is, a cylindrical object) and tightly wind the wire onto it three times. In this case, you need to ensure that as a result of this operation the “tails” are approximately the same length. After winding, the “tails” need to be intertwined with each other, pulling the wire quite tightly.

Now we begin to form the “whirlpool” itself. We align the turns so that they lie parallel and fit closely to each other, then we twist the ends of the wire even more tightly.

We continue to twist, holding the top with a finger so that the “whirlpool” is flat. This requires some skill and may not work out right away, but we do not retreat from difficulties!

When the “whirlpool” grows to the desired size, leave the free ends perpendicular to the rim of the ring.

We remove the ring from our cylindrical object and begin to wrap the “tails” of the wire around the rim.

Be sure to press each turn with duckbills, but carefully and gently so as not to leave dents on the wire.

When there are three lines, the ends of the wire need to be cut with wire cutters. We leave only very short pieces, approximately the width of the rim of the ring, and treat them with natfil so as not to prick your finger. We approach this task responsibly and smooth the ends until they are round.

We bend these rounded “tails” with duckbills onto the wrong side of the rim and press them well.

This is roughly what it should look like from the inside out. If the “whirlpool” turns out to be too convex for your liking, you can also press it in with platypuses. But carefully! It is very easy to scratch the wire.

Now the ring is ready. You can try it on! And wear it with pleasure.
Generally speaking, to give a piece a more finished look, it should be patinated and polished. But this is a broad topic and, perhaps, for a separate master class.

Thank you for your attention to my MK, and look into my workshop

In the nineties, when the country was faced with such a thing as a shortage, and it was almost impossible to get something worthwhile in stores, almost no one wondered how to make a ring from wire, and no one could be surprised by such homemade decoration. Now this trend has moved aside, a lot of costume jewelry has appeared in stores for literally pennies. But there are fashionistas who know how to make a wire ring with their own hands so that it fits organically into the image.

Necessary materials

To make this simple decoration you will need very few tools and materials:

  • Any thin wire, preferably aluminum. For children's rings, you can use one that is covered with insulating plastic.
  • Round nose pliers.
  • Scissors for cutting metal.
  • Beads.

How to make a wire ring with the inscription love

In order to make a wire ring with the inscription “love” yourself, you first need to have some experience working with this material. With some skill, creating such an accessory will not be difficult for you.

You can write almost any word using this principle. But it must be remembered that it must consist of three or four letters in order to fit on outside finger

How to make a champagne wire ring with your own hands

Some romantic men, in a fit of emotion, when there is nothing at hand except a bottle of champagne, still want to make their girlfriend happy, at least with a wire ring. In this case, the wire on which the bottle cap is held can come to their aid. The principle of making such a ring is very simple.


Ring with a bead inside

How to make a wire ring so that it is unusual and at the same time very attractive? Most likely, those around you will not remain indifferent to the product in which the bead is hidden.

To make it, you will need to repeat the first steps from the section “How to make a ring from champagne wire”, only instead of forming a rose from the free ends, you will need to make a small spiral, put a bead on it and start randomly wrapping the free ends around it . It is necessary to achieve such an effect that the bead continues to be visible through the wire. But it was as if it were all covered with cobwebs.

Another option is to pass the free end of the wire through the bead, place it in the middle of the ring and make a couple of turns of the wire around the bead so that it is all above the ring.

This accessory will be a great addition to a romantic look.

Unusual accessory: ankle ring

An excellent summer decoration would be a ring worn on your foot. This accessory will look great with open shoes and boho style clothes. Here detailed plan, how to make a ring from copper wire in the shape of a snake.

  1. Take a wire 10-12 cm long.
  2. Place it on the back of the toe on which you plan to wear the jewelry, exactly in the center of the wire.
  3. Wrap both ends around your finger to make two turns.
  4. Remove the ring from your leg and bend one end of the wire with pliers several times, imitating the tail of a snake. Cut off the excess.
  5. Using the same pliers, bend the upper end of the wire into the shape of a snake's head and fold the free end down so that it is hidden under your finger while wearing the product. Trim off the excess.

Ring with semi-precious and precious stones

If you are still wondering how to make a ring from wire and none of the options proposed above appeal to you, then you will definitely be delighted with this decoration. If you have several beautiful and small natural stones, you just need to turn them into a beautiful ring. It’s good if there is already a hole in the stone, for example, if it was left over from another piece of jewelry. But you can simply glue the stone in the center of the product. All the initial work follows the steps of creating a champagne wire ring. But for this product it is better to take very thin copper or gilded wire and fold it not twice, but three or four times. Then the loose ends need to be twisted around the stone.

Wire ring with beads

Jewelry with beads looks very beautiful and delicate. To understand how to make a wire ring with small beads, you do not need to have experience in creating such products. All you need to do is place just enough beads onto a thin copper wire to cover the top of your finger. Then, on one side and on the other side of this bead row, you need to make small rings using pliers. Now take a small piece of wire and secure it to the ring of the bead row, then repeat the same on the other side. Try on the product: if it fits you in size, then cut off the excess, if not, then first change the size up or down.

Wedding rings: imitation wire weaving

Interestingly, a few years ago the world of wedding fashion was swept by a wave wedding rings as if woven from wire. The newlyweds put an individual and personal meaning into this accessory only for them. But more often than not, such rings hint at the absence of strict boundaries within the newly-minted family. These non-standard wedding rings are chosen by girls and men who do not want to wear ordinary, strict jewelry, but want something more delicate and youthful. In addition, such accessories are often made in the shape of a nest, which symbolizes family.

How to make a wire ring for a wedding with my own hands? Not many people will decide to make an accessory for this important day yourself, but you can still participate in the creation process: draw a sketch of your future jewelry and take it to the jeweler. This way you are guaranteed to receive exactly the ring you imagined.

Thus, you learned how to make a wire ring with your own hands step by step. It's a lot of fun to experiment with this material, so don't just stop at the tips in this article and try something new!

Probably everyone in childhood tried to make a ring out of foil or wire. And even though such decorations were short-lived and rather primitive, they still had their own charm. This children's fun can be easily brought to life by making an unusual wire ring with your own hands, which will add to your jewelry collection. There is nothing difficult about how to weave a ring from wire. And a minimum of materials is required - wire, wire cutters and a mold of the appropriate size.

Master class on making a wire ring

Now you know how easy it is to make a wire ring using our master class. The technique is extremely simple, and the result of your efforts can be original rings. Their beauty is not only that the cost of materials is minimal, but the process is elementary. The most important thing and undeniable dignity such jewelry is that they are exclusive! And what could be more important for a girl who always tries to emphasize her individuality?

In addition to the ring, you can make other

Master class for beginner handicrafts from Anatolyevich.

Today we will do something simple. In our ranks of handicrafts, there are more and more new admirers of weaving wire jewelry. Quite often I receive letters where I am rightly reproached for the lack of attention paid to beginning masters. A fair reproach against me. This site even has a section “Wire weaving using the wire wrap technique for beginners,” but there are few articles on it. We will correct the situation.

Let's weave a ring from copper wire using braiding technique Wire Wrap. Let me remind you why it is made of copper wire? We use wire from electrical wires, which is much cheaper in price than special jewelry wire. And several times cheaper. Copper wire jewelry can be aged (patinated). I think this is a big plus. The hardness of the wire is approximately the average hardness of jewelry wire standards. Maybe a little bit tougher. This means we can easily change lanes if we suddenly decide to work with a different wire.

Watch the video.

Let's start weaving a ring from copper wire.

We will need copper wire with a diameter of 1 mm and 0.4 mm. The ring is not difficult to make, so let’s study all the material and get to work! After you make the ring, do not forget to patite and polish it.

We will weave the second ring of copper wire using three main wires. Watch the video to clearly see the ring weaving process.

Copper wire ring using Wire Wrapping technique

And in order not to offend advanced masters, I offer you a new (paid) master class. If you want it, buy it. Click on the picture to find out details.

It was very difficult for me to write this master class. The reason for this was my insistence on the final result, on the decoration that we will create together with you in the process of work (in this case, rings). What will it be like? Will it be possible to wear it or will it just have to be put on the shelf as another failed experiment?

I really want you to enjoy not only the creative work with wire, but ultimately received a high-quality and beautiful product that you can proudly present as your own creation.

These are the rings we will create. Let's weave two different rings, but with the same base. The base of the ring turned out to be strong and reliable. You don't have to worry about ruining the ring when wearing it. In the first case we use a bead. The fastening of the cabochon on the second ring turned out to be reliable. There is no need to be afraid that the cabochon will fall out of the fastener during an awkward movement.

The book has 50 pages, about 100 photographs. Photos in the book good quality(1000 pixels wide).

The simplest and safe way making rings for weaving chain mail, chains and jewelry with your own hands is very easy to do and you don’t have to buy rings in the store, you can also make rings of the required color and size.

Materials and tools:

  1. wire;
  2. drill with adjustable speed and drill bits;
  3. tube (diameter depends on the required diameter of the rings);
  4. blocks of wood;
  5. dremel (or hacksaw);
  6. wire cutters.

Step 1

The first step is to make a wire spring by winding the wire around the rod. There are many ways to do this on the Internet. We recommend using ours, it is less labor-intensive.

Let's take a block and drill a hole in it (the diameter depends on the diameter of the tube). Now we insert one end of the tube into the hole in the block, and fix the other in the drill. Then we attach the end of the wire to the tubes, turn on the drill at low speed, and begin to wind the wire onto the tube, tightly laying the turn to the turn. When you have finished winding, use wire cutters to cut off the excess wire.

Step 2

Let's prepare the blocks for the convenience of making rings; you just need to make them once and then use them as a template.

Let's take a block required size(the length of the spring we cut at a time depends on the thickness of the block), then we drill a through hole in the block; to determine the diameter of the hole, measure the diameter of the spring made in the previous step and take the drill slightly larger diameter. To speed up the process, let’s drill several of these holes in the block at once.

After production, we leave the block as a “template”.

Step 3

Before making the rings, we will take one more step: on the block “in front of the holes” we will draw a line approximately in the middle of the hole and make a cut - this is done for the convenience of sawing the spring.

Let's get started: measure the depth of the hole, use pliers to cut off a length of the same length from the spring and insert it into the hole. In this way, fill all the holes with a spring. Now, so that the springs do not “fly out” of the hole, we will place a block on top and bottom and secure it with electrical tape (or tape). Then take a dremel (or a hacksaw) and cut the spring “along the cut in the block”.

Now carefully remove the rings from the holes in the block. Wire rings for weaving ready.

Related publications: