How to make a chalk board at home? How to paint a chalk board How to make a large board.

IN Lately Chalk boards have come into fashion and are placed in the kitchen so that at any time you can write down a recipe or make a shopping list, leave a note to loved ones or simply draw something, for example a smiley face. Did you know that you can make your own chalkboard? No? Then welcome to our lesson! We'll tell you and show you how to make a chalkboard using a cutting board and a metal tray!

Lesson 1: Cutting board chalk board.

You will need:

Wooden cutting board

Chalkboard cover (1 cup acrylic, latex or any other black paint + 2 tablespoons tile grout)

Step 1.

We prepare the surface. If you are using a new cutting board, then just wipe it with a damp sponge. And if it’s used, then it needs to be sanded thoroughly. sandpaper, otherwise the paint may not apply or adhere well.

Step 2.

Preparing the coating for the chalk board. Of course, there are factory-made coatings for chalkboards, but you can make a coating with similar properties yourself. Simply mix the paint with the fugue and mix the mixture thoroughly. It is important that not a single lump remains!

Step 3.

Covering the board When you have defeated all the lumps, take the brush in your hands and boldly cover the board with paint. Try to apply a thin and even layer as possible. Let the coating dry and repeat these steps 2-3 more times.

Step 4.

The final touch. To really make your board look like a real chalkboard, apply chalk to the entire surface and wipe it with a dry cloth. By the way, if you sharpen the chalk (photo) in a regular pencil sharpener, your writing will be much more enjoyable!

Now you can hang or stand it anywhere and enjoy your chalk notes!

Lesson 2. Chalkboard from a metal tray

Do you have an old metal tray lying around that you haven’t used for a long time, but it’s a pity to throw it away? Wonderful! You can make a fancy chalk board out of it. So, get out your tray, prepare the same materials as in the first lesson, 4 magnets and strong glue for metal surfaces.

Step 1.

Preparing the base. Sand the edges of the tray to a shine if you want your chalkboard frame to sparkle. Then use sandpaper to scratch inner surface, this will help the paint stick stronger.

Step 2.

Coating. Prepare coloring composition(see first tutorial) and apply at least three coats to the inside of the tray. Let the paint dry and your chalkboard is ready!

Step 3.

Hang the board on the refrigerator. If you want to hang the board on the refrigerator door, you can glue 4 strong magnets to the back of the tray.

That's it, now start drawing or writing your first note! There are many excellent ideas on making chalk boards, and in the photo below you can see some of them.

slate wall And chalk board have long and staunchly occupied their niche in residential and public interiors . ABOUT different options I described the execution of this painting in a previous article. I would like to tell you today how to make your own chalk board or properly cover the wall, furniture slate paint. After all, something that is created with your own hands reflects a part of your personality and energy. Such a gift is much nicer than a purchased one, and in general, what is sold does not always match the color and shape intended.

Option 1. Chalkboard paint from manufacturers.

There are several companies represented in Belarusian and Russian market, which produce special slate paint: Tikkurila, Rust-oleum, Marat Ka, Siberia. Rust-oleum and Siberia are leaders in quality. The price issue is of course higher than the rest. They differ, firstly, in that they use marble chips instead of cement. It lays down more softly and is considered more pleasant to the touch. Secondly, it appears in several dark places at once color solutions, which expands the boundaries in decoration. From my experience I will add about Finnish Tikkurila. I use it myself and am completely satisfied. Affordable price and proper quality. But the choice is yours.
In addition to slate paint, you will need a primer and a brush with hard bristles, like for gouache. Initially, the surface is cleaned of grease and dirt. If necessary, the area is sanded and rubbed. Next, a primer is applied. After drying (it is advisable to wait a few hours) – chalk paint. It is worth noting that glass can be coated without pre-treatment and basics.

Option 2. Homemade paint.

For those who want to do absolutely everything with their own hands, not excluding the consistency of the solution, there is another way. You will need any glass for it acrylic or latex dark paint, 2 tablespoons of powder for grouting tile joints, a wide and hard brush, primer. The paint and grout are mixed well so that there are no lumps and applied in several layers to a cleaned, primed and dried surface.

Option 3. Adhesive film imitating slate/marker coating.

The creation method is very simple. It will require chalk film, the surface you want to cover, a paper cutter or scissors and your pens. It is important that the surface is perfectly clean. Otherwise, you will encounter inaccuracies, roughness, and the film will lie unevenly. Applied with a regular sticker as on decor items, furniture, and on the vertical parts of the premises. You can also purchase marker film instead of chalk film. Accordingly, you can draw and write with a felt-tip pen.

How to choose chalk.

Chalk is different, those who are worried about dust can let go of this moment. Today there is big choice special colored crayons intended for drawing on a slate board. They do not crumble and are thicker in consistency than regular school ones. Not bad a budget option offers Ikea.

After chalk paint became popular in interior design, you can find it in many homes. various elements, - from signs to entire walls - on which you can write with chalk. In this post we will tell you how to make a chalkboard a beautiful decorative element, and not just a place for notes and children's creativity.

What to write

The answer to this question seems obvious - chalk, of course! However, the manufacturers showed imagination: in addition to chalk different sizes and colors there are chalk pencils, chalk markers and even chalk paints. The choice of tools is very important for the final result.

The marker is ideal for small inscriptions and thin, clear lines, but the inscriptions are obtained without the characteristic chalk texture. It is more convenient and pleasant to hold in your hands. If you buy one, keep in mind that not all markers erase equally well - it's better to experiment on a less noticeable area.

You can make your own chalk paint by rubbing regular chalk on a fine grater and mixing the resulting powder with sanitary hand gel to the consistency of syrup. The paint is indispensable for painting stencils and large areas.

Ordinary crayons can also be made more pleasant: a variety of crayons holders, which are now very easy to find and buy, will not leave your fingers dry.

What to depict

On the slate surface you can simply draw, improvise, write down your thoughts and recipes, or leave messages for your household. However, such creativity may look careless and not serve the benefit of the interior. Cafes often become the standard for slate wall design - the walls in modern establishments are painted with beautiful fonts in different combinations and complemented with drawings.

Make beautiful lettering on a board by hand to a person without special education and experience is almost impossible, so just find a template on the Internet or create your own composition from different fonts in your favorite graphics editor. We will tell you further how to transfer this artistic splendor to a wall or board.

Method 1. Stencil

This method fits better only for large inscriptions or repeating elements. You can print the stencil on thick paper and cut it yourself, buy ready-made ones, or order production from a printing house. The advantage of the last two is the possibility of reusable use.

To stencil your design, use chalk paint or markers. The advantage of chalk over regular paint is that if it doesn’t work out the first time, it’s okay, just wash off the area and redo it. The borders can also be corrected with a damp cotton swab.

Method 2. Carbon paper

This method is a little more difficult to implement, but it opens up more opportunities, because manufacturing large quantity stencils are expensive. You will need a printed message or image, tape, graphite, a pencil, and fine chalk or chalk marker.

The technology is as follows:

shade the back side of a sheet of paper with graphite (you can replace it with chalk, but it will stain the surrounding surface more);
turn the sheet over and stick it with tape to the slate surface;
trace the image with a pencil, pressing firmly;
peel off the sheet - the outline of the image will remain on the surface;
carefully outline and paint over it with chalk;
Correct sloppy areas with a wet cotton swab.

Quartblog Digest

Along with the change of seasons comes the desire to make changes in your life. That is why Kvartblog has collected many stylish DIY ideas for room decor for each season separately.

The most complete instructions for caring for succulents at home. We will show examples of plants in the interior.

We've dealt with gray and now we know exactly what to combine it with, in what styles it can be safely used, and are ready to show you the most full guide on the harmonious use of gray in the interior.

Kvartblog has made the most complete guide to the loft style in the interior, which will help you understand the philosophy of style, decide on materials and design, and also show photos of the most interesting examples industrial housing.

The quart blog will tell you how to properly care for home bamboo, how to twist it and why the leaves may turn yellow.

Photos: pinterest.com, otquitenigella.com. wetherbeecreative.co, hgtv.com, diychristmascrafts.com, ashleyfotherby.com, mamatitan.com

It is not always convenient to leave messages on a smartphone. For example, the mother left for work before the child woke up to go to school. And he should give something to him. A text message can wake up your baby, even if the smartphone is on vibration. And later the mother runs the risk of forgetting to convey the message to her child. In this article we will look at options for making our own slate boards-reminders with which you can easily leave short messages to each other.

Variety of options

Many people prefer to use regular black paints, flavored with grout powder, to create slates. tile joints. But few people know that special slate compositions are sold in stores. They are intended for painting surfaces on which they will later write with chalk. Their cost, as a rule, is quite high, but there is less fuss with preparing homemade slate paint.

The same should be said about paints with magnetic properties. If you want to make a magnetic slate board on which you can hang a funny magnet, if desired, then these will come in handy.

The plane itself can be of any shape. To create small boards, you can use dense multi-layer plywood; for more bulky ones, a thick sheet or OSB board. If you have a jigsaw on your farm, you can cut any blanks for boards from a piece of plywood. For example, a slate on a refrigerator can be shaped like a cloud, a multi-faceted star, or a simple oval. Subsequently, the product can be framed, like a real painting, or it can be equipped with a stand and made into a tabletop.

Making a board using acrylic paint

a piece cut from plywood, sanded and sanded around the edges, or simple board for slicing;
black glossy acrylic paint;
powder for grouting tile joints;
small medium-hard paint brush;
container for preparing slate paint.

The surface painted with glossy paint will be perfectly smooth. It is useless to write with chalk on such a board, since the chalk fractions will simply have nothing to cling to. The block will slide along the board without leaving a mark. That is why the paint should be roughened, and in this case the process of making a slate board begins with the preparation of special paint. So, let's start making:

Pour the amount of paint required to cover the surface of the workpiece into the prepared container and mix it with grouting powder in the proportions: part powder to one and a half parts paint (by volume). Then mix all components thoroughly. The paint is ready.
Let's start painting. We apply the composition quickly, since the paint mixed with the powder dries instantly, and stains may remain on the surface of the future slate board.
Let it dry thoroughly and test. Chalk adheres perfectly to matte and slightly rough surfaces, and the inscriptions are clear and durable. The resulting board correct painting In no way inferior to store-bought.

Matte acrylic paint for work

Here everything happens in the same order and in the same way as in the previous version, except that no grouting powder is needed. Matte acrylic paint itself has all the properties of slate paint. The chalk clings to it perfectly, and therefore you can immediately start painting.

After hardening, you will get the same wonderful board as in the first case. We make a couple of holes with a drill, thread a string, tie it in a knot and hang it on a hook on the wall. The slate board is ready to use.

Making a board using chalkboard paint

The fastest and easiest way to make a slate chalkboard is using special slate paint. The composition initially has all necessary properties, and if you purchase it in a special can, you don’t even need a brush or roller for application.

Simply apply a layer of chalkboard paint to the sanded surface of the workpiece and let it dry. If you are not satisfied with the layer of paint, and the wood has absorbed it too eagerly, after it has dried, you can apply another layer again. After final drying, the board will be ready for use.

Manufacturing using special paints

There are many paints intended for making slate boards, but you can’t buy them everywhere. If desired, you can order online or purchase in specialized stores.

In this case, the following materials will be required:

cleaned wooden base blank;
a jar of wood primer;
slate paint (depending on preferences or circumstances, this can be a special slate paint, matte acrylic paint, or a mixture of glossy acrylic paint and grout powder);
medium hard brushes or small paint rollers.

How to make a board using magnetic paint

The procedure in this case is as follows:

To prevent expensive magnetic paint from being absorbed into the wood, thereby losing its properties, or, conversely, to prevent its layers from falling off the wood along with the magnets, a primer layer is initially applied to the base.
After the primer has dried, an even layer of magnetic paint is applied to it.
And only when, in turn, the layer of magnetic paint dries, a layer of slate paint is applied to it.

After complete drying, you can not only write with chalk on such a board, but also place various funny magnets.

We use galvanized steel

The process of creating magnetic slate boards based on galvanized steel sheets is more labor-intensive. And a much more impressive set of tools and consumables will be required here. In particular, for the upcoming work you should prepare:

galvanized sheet;
sheet of thick plywood (or OSB);
scissors for cutting sheet metal;
Double-sided tape;
jigsaw or hacksaw;
primer for metal;
slate paint (any of the above);
brushes or rollers for applying primer and paint;
plastic decorative corner.

The process of manufacturing magnetic slate boards based on galvanization

Manufacturing begins with the selection of sizes and other figurative features of the future board. When we have decided on the size and shape, we proceed directly to the process.

The procedure is as follows:

The future base is cut out of a sheet of thick plywood (OSB).
Galvanization is cut to the same dimensions.
Double-sided tape is glued to the front side in frequent strips. wood base.
A galvanized sheet cut to the size of the base is applied to the strips of adhesive tape, after which it is carefully pressed for good adhesion.
After the galvanizing is glued to the wooden base, you can begin to apply a primer to the galvanizing.
After the primer has hardened, a layer of slate paint is applied on top of it.
Wait for the slate paint to dry. Then you can start framing the future board in a frame made of decorative plastic corner.

After this, all that remains is to equip the product with brackets of your choice. There are countless of them in specialized stores. There are simply suspended ones, there are ones with a changing angle of inclination, there are ones that rotate from side to side. Agree, such a magnetic slate board on the wall, the photo of which is presented in this material, will look great in any interior.

Equipping the product with backlight

To give the slate more elegance and aesthetics, you can frame it around the perimeter LED strip, hidden in a groove wooden corner intricate frame. Also original frame can be made from the same decorative plastic corner, purchased 5 mm wider than the size of the wooden base. It must be secured to the edge of a wooden base with an overlap, and into the resulting groove between front side Place the LED strip on the corner and edge of the board surface.

Such a slate board will definitely become a source of special pride for you. First of all, you made it with my own hands, and secondly, they also achieved that it looks no worse than a store-bought one, plus it is equipped with backlight functionality, which expensive factory models do not have. Not only will it faithfully serve you in accordance with its intended purpose, but it will also become an excellent unique lamp that can perfectly decorate any interior.

Final information

Anyone who is satisfied with our master class on how to make a slate board with their own hands at home can take note of the suggested tips.

And for those who don’t have enough, they can watch one more video for complete satisfaction. The video shows how real masters of “handicraft architecture”, burdened with the dominance of useful branded equipment, approach the production of slates.

We hope that the boards you make will be no worse than those shown in this video.

Chalk boards are becoming increasingly popular in modern interior. Firstly, it is very convenient - by hanging such a board in the kitchen, you can write short reminders to yourself about what you will buy and what you should not forget to do.

For a family with children, this is also an irreplaceable entertainment and your wallpaper will remain intact. Chalk boards are used to decorate parties and birthdays, and adults also love to draw on it and leave wishes.

You can buy such a board ready-made and it costs from 10 to 100 dollars, but why? If it’s very simple, you can make a chalk board at home from any base and acrylic paint.

There are special paints - they are called “for chalkboards”, but you need to spend money on them.

The peculiarity of such paints is that they are the same acrylic, BUT they contain small solid particles that allow the chalk to linger on the surface of the board.
If you add any abrasive material to the paint, for example, gypsum, grout, cement - it is precisely its elements that will make ordinary acrylic paint suitable for painting on it.
We offer the simplest master class for making such paint using alabaster and black acrylic.

Choosing a board base

You can choose absolutely any base, it could be:

Any plywood
Any piece of board, table top or piece of old facade
Mirror glass or
Cardboard - take apart the old one cardboard box and the base is ready

Master class: how to make a chalk board

The fastest and easiest way to make a board is to use any cardboard as a base; it does not need to be processed before painting. In addition, after practicing on it, you can move on to larger surfaces.

Ingredients and Tools

2 tablespoons alabaster
1 tablespoon water
3 tablespoons black acrylic paint
cardboard
tassel
dry rag and chalk

Manufacturing process

We take alabaster and water in a ratio of 1 to 2, mix and rub the lumps well until a uniform thick mixture is obtained.
Pour paint into the container. There should be 3 times more paint than alabaster. Add the prepared mixture of alabaster and water to the paint and mix thoroughly so that there are no lumps left.
If you don’t mind and have a technical attachment, you can do this using a mixer. It's faster and more reliable. But if you stir with a spoon, it won’t take long either - lumps will disperse in 2-3 minutes.

If the mixture is too thick, add a little more water as acrylic paints different manufacturers have different densities.

For durability, apply 3 coats of paint to the chalkboard. Let the paint dry completely between coats. After the third layer has dried, It is recommended to rub chalk over the entire surface in order to harden it, and then wipe the chalk with a dry towel.

TIP: The cardboard may sag slightly after applying the paint, but it will straighten out once it dries.

Insert the cardboard into any photo or painting frame and your board is ready!

Chalkboard Ideas

This master class can also be used to paint all or part of a wall. Such black wall drawing boards are becoming a whole trend in the kitchen or in work area. But before painting, the wall must be treated, read in detail at this link.