How to make a children's playground with your own hands from available materials. Do-it-yourself sports complex at the dacha Do-it-yourself playground
The best place to relax from the hustle and bustle of the city is your own dacha or country plot, where the whole family can find something to their liking. Adults most often prefer activities that the younger generation will either not yet be able to do or are uninteresting. This leads to the fact that children are unoccupied, mischievous and only interfere with serious work. To solve this problem, all you need is an idea, a tool and some work with your hands. It is necessary to build some kind of children's corner on the site where the child will be really interested. It’s not difficult to equip a children’s playground from scrap materials, and it will be much cheaper than buying a ready-made one.
Project stage
At the very beginning, it is important to think through all the details that must be taken into account during the implementation of your project. At the design stage, it is very important to take into account the main points on which the usefulness of this building and, of course, the safety of children depend.
- The playground should be located in an open space where children will be completely accessible to the eyes of adults - this allows you to keep the younger generation under control.
- All parts and objects of the site must be completely safe, without sharp corners, ends, or jagged edges.
- It is better to build buildings at an average distance from the work area, outbuildings and vegetable garden, that is, so that during work you can monitor the child’s activities and location.
- It is better to choose soil at the location of the playing area that is completely or partially unsuitable for growing any crops; this is necessary in order to save fertile land as much as possible.
- You can also place the playground near a fence, only in this case you will have to take care of the complete safety of small children.
- There must be a canopy over the children's corner that will prevent the child from getting heatstroke or getting wet from sudden rain.
Thus, the design stage and preliminary creation of a layout is an integral part of building a playground with your own hands from scrap materials. Of course, we should not forget about the main functionality of the children's corner - the entertainment and development of children, which is a more important aspect of its construction. Therefore, you need to approach the work with ready-made ideas and enthusiasm, planning to install not only banal swings and a sandbox on the playground, but also add something else of your own to them. Only then does the work become interesting and can please not only the children.
At the design and main – implementation – stages, the younger generation can also be involved in joint activities, but, of course, according to their physical abilities. Working together will help strengthen family understanding and develop children's creativity.
Site preparation and selection of materials
At the end of the design stage, you should definitely know the location and content of the children's corner. The site has been selected, all that remains is to process it and prepare it for new buildings. The preparation work takes place in several stages.
- It is necessary to clear and level the ground to the required area.
- You need to decide on a coating that will serve as the basis for the entire site. Most often, a mixture of crushed stone and sand is used, as it is the most budget option. You can also cover the ground with artificial grass or special rubber.
- Then you need to take measurements and purchase all the necessary materials. The main thing is not to forget that all this is necessary for small children, so all materials must be as safe as possible and comply with all norms and standards.
- After this, you need to make sure that you have a standard set of tools for the job: nails, screws, self-tapping screws, a screwdriver, a screwdriver, a hammer, a hacksaw, a grinder, a painting tool and paint. If something is missing, you need to buy it in addition, as it will all be useful throughout the construction.
- At the very end of the preparatory stage, all inaccuracies in the plan should be corrected.
Now you can get to work.
Arranging a children's corner
When choosing play elements for your playground, it is worth analyzing what your child likes to do most and focus on this. Some children prefer to spend a lot of time swinging on swings, some like to spend their leisure time making sand figures in the sandbox, and some prefer slides. All this needs to be taken into account before you start building something with your own hands.
Manufacturing of individual elements
Sandbox
One of the most common children's entertainment, which helps the creative development of the younger generation and can captivate them for several hours. Sandboxes in their modern form have been greatly transformed and look quite aesthetically pleasing, so you have complete freedom of ideas in shapes, painting and various details. But such entertainment is not suitable for everyone and this is also worth taking into account. Therefore, it is better to coordinate the construction of a sandbox with the child.
Swing
The most favorite element of children's playgrounds is the swing, and not only children, but also many adults love to swing on them. There is no child who would not love a swing, so it is necessary to install them, but it’s up to you to choose the type, shape, size and color. Swings can be either hanging or regular. Using available means, it would be better to make a hanging swing, which will be attached to the top crossbar on ropes or chains. The second option is less safe for children, as the chains can pinch the skin and spoil the child's fun. When choosing ropes, you should remember that over time they can wear out and fray, so they need to be periodically checked and replaced.
Gorki
Almost all children also like this type of entertainment, and it also gives absolute freedom in creative terms. Slides can be made of different materials:
- metal is not the best material, as it rusts very quickly;
- Stainless steel is a better option, but it is one of the most expensive, so using stainless steel is unprofitable;
- wood is a material that requires careful processing and polishing, and in the future it will have to be covered with something slippery.
- plastic is the best option, as it is inexpensive, wears out for a long time and does not require special treatment.
The important part is the size of the slide, as it should be comfortable for your child and have enough capacity for 2-3 years in advance. Often slides are built in combination with some additional elements.
Children's house or hut
There are many options for this structure - from the simplest and fastest to build to complex structures made from small logs and poles. Of course, it is better to create a real house for your child, which will look like an ordinary house with a porch, doors and windows. If this is not possible, then you can create a small tent or wigwam, the main thing is not to forget about the safety of children. The structure must be stable and not collapse at the first strong wind. In such separate houses and huts, children like to set up so-called headquarters. If the child likes the building, then he will spend more time there.
Sports section
Such a corner will help your child's physical development and allow him to conduct his own sports activities.
Additional items
The most popular elements of the playground are outlined above, then you can rely on your imagination. On the site you can place an infinite number of different elements and parts from improvised means - tires, tires, pallets and other things. Here the choice is already up to you and your child.
Placing elements on the site
The area of land required for construction depends on your wishes, age and number of children. Usually this is a square corner with an area of 8-10 square meters. In such a site, the arrangement of elements can be very diverse. Most often, a slide in combination with a swing and other equipment is located in the center, a sports corner and some creative elements like a drawing board should be located in the corner near the fence. The rectangular area is a little more complicated; there the elements will most likely have to be installed in a row, one after another. You also need to remember about safety, especially if you have more than one child. Due to the circumstances of a large family, you cannot place a swing next to the sandbox.
Options for decorating the area
A children's corner can be decorated in completely different ways, everything also depends on you and your child, on your wishes, creative ideas and imagination. The area around the perimeter can be planted with flowers or you can create some thematic figures and place them in different places of the site, the bright color of the main buildings will also be a decoration, they can be covered with different bright colors or with a coating in the same style, there are no boundaries.
Design ideas
The design of a playground depends on creative ideas, the volume of plans, style, materials used and the time that the owner is willing to spend on this event. It is better to coordinate all steps with the children; they should highlight the details that they like and what can be improved, because the main thing is that they have fun and comfort. Since children are often bored at the dacha, the main idea of creating such a children's corner is to provide children with a fun and interesting activity, which means that everything should be decorated in an interesting and colorful way.
Absolutely everything can be combined on the site, and ideally all the main elements of entertainment should be built. If there is not much space, then you can install only the most interesting and important things for the child, for example, a swing and a sandbox, a slide and a sports corner, and so on.
If you make a playground with your own hands and are still in the process of construction, then you can whip up a cardboard “dwelling.” Surely almost every family has large boxes for refrigerators, home theaters or washing machines.
333333 
33333 
33333
With a little imagination and some scotch tape in their hands, adults can turn unnecessary trash into a creative house for their children and their neighbors, because playing alone is not always fun.
A children's playground, created with your own hands from scrap materials, can turn into a fairy-tale town if adults try to build houses for the kids, similar to those described by Nikolai Nosov in the book about shorties.
With roofs painted in the shape of cups of flowers, berries, fruits and mushrooms, the miniature dwellings will delight the eye, turning the site into a fantastic relaxation area for both children and adults.
You can do without cardboard by setting up a children's corner. It is enough to simply stretch bright fabric or oilcloth between vertically dug wooden piles.
It is best to use plastic film instead of a roof on top so that it protects the inside of the house from rain.
If funds allow and you have some carpentry skills, you can build a wooden play house. The playground will benefit greatly from this!
With your own hands it is not difficult to build a small building with windows, doors and a roof, with a veranda and a porch.
Instead of boards, logs are quite suitable. But if you wish, you can even build a nice cozy hut out of firewood, fastening them together with cement mortar.
It is only important to follow all safety rules so that children, while playing, do not get hurt on protruding nails or twigs, do not fall through climbing onto the roof, or break limbs by falling out of windows.
Today there is a trend to reuse plastic containers. Bottles are very creatively used to decorate courtyards in cities, summer cottages, and playgrounds in kindergartens. With your own hands you can make a wonderful playhouse for children.
Bottles should be tied with strong twine, creating a wall panel or part of a fence. The frame of the building itself is made of wooden piles or metal pipes.
Sometimes craftsmen use cement mortar to fasten the eggplants together. Then the container is laid horizontally.
The container can also be used for the construction of artificial reservoirs on the site. By fastening plastic bottles with cement, it is easy to build the walls of a miniature pool in this way. With a pond, the children's playground at the dacha will become the favorite place to stay for children and adults!
You can also build steps with your own hands, making them from natural stone or brick. Just make sure that everything is stable and there are no sharp edges or jagged edges.
The simplest body of water
In order for a children's playground in the country, equipped with your own hands, to have an artificial pond, it is not at all necessary to spend a lot of money. After all, you can get by with a piece of plastic film.
The dug hole is simply covered with waterproof material, which is secured along the edges with stones. Pour water into the pool and splash around to your health! Of course, such a reservoir can not be used for as long as with a cement foundation, but as a “quick-and-dry” pool option, it is suitable for many.
Near the pond you can install benches, a table, and an umbrella that protects from the sun. In this case, adults can also relax here, watching children play.
A skilled craftsman manages to make “candy” out of any garbage. By using old tires you can create a wonderful DIY playground! Photo of the original sandbox, in the construction of which the baby himself takes part - only one option for their use.
If you cut off the inner bends of the tire, lay the bottom with film or fill it with cement, you can get a miniature pond. In the summer, when it’s hot, not only kids, but also adults can swim in it. However, you should remember that water quickly deteriorates in the warm season, so it needs to be changed quite often.
Parents usually actively participate in organizing children's leisure time. Many people help build playgrounds in kindergartens. With their own hands they make figures of swans, nesting dolls, crocodiles, Baba Yaga, and Smeshariki from old tires. A little imagination, a sharp knife, glue and paint - and as if by magic, old trash turns into a fairy-tale creature!
And if you use tires of different sizes, then by stacking them and firmly fastening them together, you can easily build a ladder for running.
An interesting version of the labyrinth. Then the tires are dug vertically into the ground. The kids happily run around the playground, crawling inside the rubber circles, climbing up, jumping off, playing catch-up. Some tires can be hung low above the ground. This will complicate the game, because it is quite difficult to get inside such an obstacle.
It’s so nice to drink tea or even have lunch in nature. And kids will eat with much more appetite in nature. It is quite easy to equip a playground for these purposes with your own hands. The photo below shows how easy it is to make a table outside without the use of expensive building materials.
Craftsmen even manage to make chairs with armrests from tires and miniature sofas.
The imagination of a skilled craftsman creates an amazing children's playground. You can make a sandbox with your own hands from scrap materials in half an hour, just a small amount of ordinary chopped or sawn firewood, glass or plastic bottles.
The material, which in everyday life can be called trash, is used as a border or a miniature fence.
Sand is poured inside - that’s it, the sandbox is ready! You can add functionality by turning the sandbox fence into an obstacle course. For this purpose, all parts are made of different heights.
Children, moving along such a curb, develop the ability to maintain balance. Tired of digging in the sand, they can easily change the type of activity, which is very useful for a growing organism.
Since you can make a playground with your own hands from scrap materials, practically reducing financial costs to zero, everything will be used, even old car wheels. Craftsmen use them to construct original benches in recreation areas, imitating a car. And tires can make wonderful swings. You just need to choose a stronger tree, a strong enough rope and learn how to tie real sea knots, which will guarantee the safety of children. You can use metal chains or braided wire bundles.
A children's playground, created with your own hands from available materials, will not only be functional, but also beautiful if its design is consistent with the general style. To do this, the master must use bright colors and use various details. For example, carousel swings that imitate a motorcycle or ATV look creative.
Craftsmen resort to making swings in the form of animals, cutting them out of tires and connecting the parts with bolts. If you think of an option where the top part of the carousel can rotate, then the kids’ joy will know no bounds.
To make a playground with your own hands from improvised means a favorite place to play for kids, you can equip it with rocking chairs. Half of a car tire is placed on the ground with its roundness down, and a board is bolted onto the cut.
Be sure to attach holders to the seat. They can be ordinary door handles or old wheels or bicycle handlebars.
Sculptures will help you create a unique design. The master chooses fairy-tale creatures or fantastic animals, aliens or cartoon characters as prototypes. The frame of the sculpture itself is made of wire, which is coated with clay, plaster or cement.
Since it was decided to make a playground with your own hands from scrap materials, bright small details are stuck on top of the figures: caps from yogurt or mineral water bottles, parts of broken toys, checkers and buttons.
Scattered parts from the designer " lego"will also be used.
Even broken dishes will become material for decorating sculptures. However, you should be careful here: they need to be immersed deep enough in clay or cement so that the sharp edges cannot injure.
Old basins easily transformed with paint into strange turtles. And the bowls, mounted on tree stumps, imitate giant mushrooms.
Placed in the grass or along paths metal dishes, painted red and covered with black circles, will become fantastic ladybugs.
A from plastic bottles The results are cute piglets and hedgehogs, funny and amusing.
Metal cans They will help build alien creatures that will also drive birds away from the site. After all, if you connect them in the form of beads mounted on a string, when the wind blows, the “arms” will sway, creating the effect of movement.
Natalia Chernikova
I always enjoy looking at my colleagues’ photo reports about landscaping. And one can only rejoice at how well equipped the playgrounds are. We have problems with this. Of the new stationary equipment, we only have a slide. Everything else is done hands teachers and parents of students.
Every year we rack our brains over how to get out of the situation and arrange plot.
We mainly use plywood, boards, logs, and available materials for equipment.
So, for several years now, the train has been serving well as a development center for the development of fine motor skills of the hands. At first we had him like this.
Over time, the mechanisms of the locomotive fell into disrepair. This year we updated it. And the locomotive became like this.
Its details are bright and interesting.
Nearby is homemade equipment also aimed at developing fine motor skills. A few years ago, we found the backrest of a baby crib useful for such equipment. But it broke down without serving us even 3 years.
Now we have new equipment, made of durable wooden cuttings, metal crossbars. I would like to believe that it will serve us for a longer period.
The center for playing with water is a boat made from a children's bathtub. I already talked about it in a previous publication.
Nearby is Moidodyr, where children can wash their hands using a washstand.
Sand play center - sandbox and mini sandbox "Cow", which has been serving us for several years.
For role-playing games, we have an airplane.
And also a gas station for cars, a car, a motorcycle, which I also talked about.
We have a creativity center: table, bench, stand for fine art works.
And also, for many years now, a table in the shape of a ram for drawing with semolina and sand has been pleased with its functionality.
When children are doing creative work at the table, the rest of the children are running around and playing outdoor games. In order to be able to organize construction games at the same time, the idea came to make another table. And do you know what we made it from? From a wooden reel with wires on it. We dug one part of the coil into the ground, painted the top part, and made flowers on the surface of the table using colored self-adhesive paper. Our table turned out to be large.
There is an opportunity for everyone to gather there to play board games. There are plans to make a bench so that we don’t have to take chairs out of the group every day.
The flowers in our flowerbeds in the shape of swans have already grown up and delight us with beauty.
A health track was created, which I also talked about. Survived until the end of summer.
We have physical education equipment "Apple and Pear" made from plywood. They are used for rolling balls. We have been using this equipment for several years.
We made multi-colored gates for climbing. An arc made of a hoop with plastic colored balls placed on it. We placed the gate where there is at least some green soft grass.
This year to organize an outdoor game "Carousels" A carousel made from several hoops of different sizes and multi-colored satin ribbons was hung on the veranda.
To organize games to develop breathing, we made a guide in the form of an inverted umbrella and butterflies.
We are building the lords for next summer. I'm looking for ideas from you, colleagues. Thank you.
I wish you all creative success!
Publications on the topic:
Quite recently, a couple of kind gnomes “settled” in my house. I made these fairy-tale little men to decorate the beds on our children's plot.
"Summer Fantasies" - do-it-yourself renovation of a site in a kindergarten.
Dear colleagues! I bring to your attention a master class on making flowers from scrap materials with your own hands.
With the onset of warm days, children's stay in the fresh air increases and teachers face the problem of organizing interesting activities.
The long-awaited summer is coming soon. I really want the kindergarten area to look bright, lively and interesting in the summer! Kindergarten site.
A kindergarten is a special institution; it is practically a second home for its employees and children. And you always want to make your home cozy and warm.
We will send the material to you by e-mail
D For the normal development of children, they need to actively spend their free time - running, playing, having fun. When creating playgrounds, the main attention is paid to their safety and functionality. To build playgrounds with your own hands on a country plot or dacha, photos of which you will find in this article, you will need some tools, carpentry, construction and plumbing skills.
Homemade playground
Decorating children's playgrounds with your own hands, photos of which are posted on the Internet, requires the presence of certain equipment. If you don’t have something, don’t be upset, here are some ideas that will help you equip your playground.
Making a slide house
A do-it-yourself children's playground at the dacha, a photo of which you can find on the Internet, always includes a slide or a house slide. The base of the slide is a frame of 4 vertical posts. You can use only 2 racks, but then the possibility of creativity is reduced and the slide will be limited to one slope and one rise. On a frame of 4 posts you can make a slide with one slope and several rises. Make one ascent in the form of a ladder, another with normal steps, and the third with a rope.
This design will seriously diversify children's leisure time. For a slide with a straight slope, it is not advisable to make the angle of the slope more than 30 degrees relative to the ground in order to avoid excessive acceleration and injuries.
Helpful advice! If possible, use a plastic ramp, which is sold in stores. With its help, children will get more pleasure than from a straight wooden ramp.
What to make a slide house from
For this you will need:
Preparing the base
Find a place for the slide and prepare a hole for the foundation of the frame. We recommend making a square frame with a distance between posts of 1 meter. The side size of the pit should be 1.5 meters, the depth should be at least 20 cm. Compact the bottom of the pit and pour a 10 cm thick layer of crushed stone (fraction 15–25 mm) there. Compact it. You can also make do with small holes under each block. In this case, the depth of the pit should be at least 50 cm. Soak the lower edge of the beam with diesel fuel and molten bitumen, the treated part should rise above the ground by 1.5–2 cm. Place a crushed stone cushion on the bottom of the pit - fraction 15–25 mm, thickness 5 –10 mm. Insert the pillars into the hole, level them and ensure their correct orientation - their edges should be parallel to each other (this is not required with logs or round bars). Then pour concrete.
Helpful advice! The less water in concrete, the stronger it will be. To make thick concrete more flexible, add plasticizers to it, which can be bought at a hardware store.
Bottom harness and ramp
Tie the bars with a 50 mm thick board at the floor level of the house, and also install one longitudinal jumper. Attach the boards to the bars using self-tapping screws no less than 100 mm long. Make a tray for the ramp from a 25 mm thick board. To do this, cut 2 boards, the length of which is slightly longer than the length of the slope. Mark the angles of contact with the framing frame and the ground, then cut the board using a circular saw or jigsaw. Place the boards against the trim to make sure you have done everything correctly. Then cut the lintels from the same board. The length of the jumpers is equal to the width of the slope. Lay the long boards on the ground and use self-tapping screws to attach the lintel to them from the bottom.
The distance between the jumpers is no more than 30 cm, and install the first and last jumpers 5 cm from the edge. Make a cutout in the upper edge of the board so that the slope rests on the frame as if on a shelf, and the jumpers are flush with the frame. Attach the ramp to the harness using the corners of the bolts with nuts and self-tapping screws. Install the corners so that children do not get scratched. Attach the corners to the slope using bolts and nuts so that there is nothing protruding or sharp on the side of the slope. Sew up the slope with plywood using self-tapping screws. They must be recessed by 0.5–1 mm, then puttyed and sanded. Secure the bottom edge of the ramp using pegs or anchor bolts driven into the ground.
Ladder
Cut two pieces of 50 mm thick board, the length of which will be slightly longer than the length. Mark and trim the angles of contact with the harness and the ground. Cut 24.5mm wide grooves into these boards to accommodate the steps, then cut the steps to the required width and assemble the stairs. Attach the steps to the side boards using self-tapping screws. Attach the ladder to the harness and the ground on the side opposite the slope. Attach supports and railings to both sides of the stairs. They can be made from 25 mm thick boards. Posts and railings should be smoothed using a hand or electric plane to remove any sharp edges, then sanded thoroughly. The top edge of the railing must be attached to the posts.
Additional entrances, roof trim and roof
On one of the sides, make a ladder from the same block that was used for the racks. Process the cut bars using an electric planer to slightly round the edges. Attach these bars to the posts at a distance of 20–30 cm from each other. Screw the first block at a distance of 20-30 cm from the ground. Prepare for an extreme climb to the lodge. To do this, make the same tray as for the ramp, but installed at an angle of no more than 20 degrees relative to the posts. Tie the posts at the ceiling level of the house using a 50 mm thick board. On the side of the extreme entrance, strengthen the strapping using steel corners. Cut and lay plywood on the floor, then line the ceiling with plywood. Cover the outside of the house with plywood, making round or oval entrances. Determine the size of the entrances/exits yourself so that the child is comfortable. To make the roof, cut 4 rafters from 25mm thick boards. Determine the angles of the rafters based on the height of the roof. Attach the rafters to the corners of the frame and connect them together from above using metal corners. Cut the plywood into pieces of the required size and sew up the roof.
Cutting plywood with a jigsaw
Final works
After finishing the work, be sure to sand all the places where a child could get a splinter. Then treat the slope, steps and extreme rise with parquet varnish. Attach a 10–15 mm thick rope to the top harness on the extreme climb side and tie knots on it every 20 cm. Paint the house so that it looks beautiful.
