How to build a country house with your own hands (57 photos) - technology for constructing a frame structure. Which house is better to build - choose materials and type of construction What material to build a country house

If you have recently purchased a summer cottage, then the issue of building a small country house is very relevant for you. You can store household items, expensive tools in it, as well as create a small lounge and kitchen. In this article we will look at how to make construction of a country house inexpensively with your own hands, and also find out which materials you can save a lot on.

Construction of a country house inexpensively with your own hands

Of course, like any construction, it also needs to start with calculating the budget. How much money are you willing to spend on this project? If enough, then you can think about building a brick house. Otherwise, it is recommended to use borrowed technology frame house. The advantages of this method are obvious - saving money, as well as the efficiency of the work performed. In just a couple of weeks your house will be ready for use.

Stages of construction of a country house:

Creating a project. If you do not want to contact a specialized agency, then you can create your own project that will be convenient for you personally. The main thing you have to do in any case is to show your finished project professionals to avoid possible problems in the future. As for the area of ​​the future home, it all depends on your personal preferences and capabilities. 40 sq.m. is quite enough.

Purchase of building materials. What materials are needed to build a country house with your own hands? Today on the market there is huge variety high-quality, efficient and durable materials that are suitable for any construction:

• Log or timber. Wood will be needed in any case. Depending on the quality of the raw materials, the cost of the timber will fluctuate. Carefully inspect the material; it is important that it is thoroughly dried.
• Brick or cinder block. They have low cost, durability and reliability. Although building a house using these materials will not greatly affect costs, be prepared to spend a significant amount on subsequent wall finishing.
• SIP panels. High quality, modern materials, which not only save your money, but also time. A house made from SIP panels is warm, dry and comfortable.

Important! If you want to save money on materials, study the market thoroughly. You will be able to find quality raw materials with big discount. You should not focus on branded companies, since they are the ones who mark up more than 50% on the price.

Where to start building a country house on a summer cottage?

The most important element of any country house is the foundation. The service life of the structure, its reliability and strength depend on it. Of course, the foundation should not be neglected, since any mistake or wrong action will immediately result in cracks and splits in the walls. Before digging a trench for the foundation, carefully calculate the weight of future materials - walls, roofing, sheathing, insulation and finishing. All this adds kilograms. Typically, the depth of the foundation of a house should be at least 1 m. After pouring, it must be left for a month to compact and dry.

Immediately after the foundation, you can begin building the frame and installing the roof truss system. It is also worth considering high-quality sewerage. If there is a central sewer system, then you should buy a septic tank with outlets to the irrigation fields.

So, is it possible to build a country house? inexpensively with your own hands? Certainly. The main thing is to plan and not rush to buy materials from the first person you meet.

See also video:

DIY garden cottage

Do-it-yourself summer houses for relaxation

Majority summer residents live outside the city only in the summer and do not need expensive capital houses. They want a roof over their heads and living space large enough to accommodate family members.

How to build a house with your own hands?

An optimal economic pension is best suited for this purpose.

Advantages of summer cottages

House boards are popular due to the following advantages:

• High level of construction - 2-6 weeks
• Low cost - from 3 to 8 thousand rubles per square meter. m versus 18 thousand rubles. per square meter. m for houses with brick walls
• Low weight, allowing the use of cheap, shallow foundations
• Resistance to freezing forces
• The ability to manufacture parts at the factory, which improves the quality of construction and simplifies assembly
• No shrinkage
• Wide range of architectural solutions
• Ability to warm up and adapt at home for life

Panel house design

The house consists of a wooden or metal frame covered with panels.

The metal frame is made of a rectangular cross-section, and the wooden frame is made of a rod. For external coatings:

• Lamels
• OSB panels
• Profiled film
• Moisture resistant plates
• Asbestos cement slabs
• toilet

The inner leather is made of moisture-resistant materials.

If a house should live all year round, the walls are laid out insulated.

Construction of panel houses

Construction companies offer services for the construction of turnkey panel holiday homes or a set of parts for their own construction. The first option frees the builder from most of the problems, while the other allows you to build a house for your dacha and save money.

Project selection

A quality project is the basis for success in building a house.

Serious companies that produce panel houses and key building kits offer dozens standard models and offer custom design services.

Individual projects are quite expensive, so they are rarely used for economy-class houses.

Creation standard project allows you to save money in design and a wide selection of already prepared architectural solutions - choose the desired design and location of the house.

foundations

Under the light panel house, spacers and notches are used with columns and strips and screw pilots.

• Small hidden pillars reduce costs and shorten construction time.

  Columns are installed in increments of 1.5 to 3 meters under external walls and columns, at the corners of the building and in places where interior walls connected to external walls. They are made from logs, concrete, red brick, bentonite and base blocks. The depth of the coating is up to 40 cm, the cross-section should exceed the thickness of the walls. To increase stability, the columns are connected to wooden or reinforced concrete beams

• Countertops do not allow for a warm basement.

  If the design is included in the design, a shallow recessed base underlay is applied under the exterior walls and a foundation base is provided under the interior walls. The depth of coverage and width of the tape are the same as for pillars. The belt is made from concrete, quarries or foundation blocks

• On weak floors it is based on screwdrivers.

  Their use allows the house to rest on solid ground, which deeper than the surface. Helicopter bases can be built in 1 to 2 days without the use of heavy equipment

frame

Panel panel house can be made from a kit made in a factory or from purchased materials, in-house or from a contractor.

Turnkey construction of a house eliminates most of the problems for the developer, with the exception of control over implementation construction work— it is impossible to check the build quality of the frame on its surface.

To self-assemble a frame from factory parts, you must follow the instructions and wiring diagram included with the kit.

The work resembles a design meeting and is entirely possible for a developer with experience in construction.

The cheapest, but most worrisome option is to build the lumber itself. Depending on the size and number of floors of the house, the frame is made of a rod 100x100 - 150x150 mm or 50 mm thick.

The frame is installed in the following order:

1. At the top of the base there is waterproofing of the roofing material
2. For foundations using built-in parts and anchor bolts for fastening the frame (thresholds) - beams, it is located on the edge of the house and under the prairie
3. Place logs and give rough soil.

   Fits on the edges of the base or beam beam

4. Install vertical skeleton posts - first on the corners and then on the walls of the 0.6 m shelf, installed on the cutout, sawn in the bottom panel, securing the clamp and nails and securing the first temporary and then permanent remainder.

   At the same time, they constantly control their verticality and position in the same plane. The corner posts are made from sticks and you can use the same 50mm width edge plate for intermediate use

5. In the upper places the top tape works. Framed door and window openings

All wooden structures must be impregnated with antiseptic compounds.

Overlapping and covering

Wooden columns are placed on the top frame of the frame and secured using structural clamps.

Width 3-4 meters - plate size 50x150 mm with a large range - 100x150-150x150 mm. The beam is 0.6 m. In this case, 1.8 m wide screens (modules) are used to cover the ceiling.

Rafting clusters are made on the floor on a panel 50x120-50x150 m.

First install the outer rafts, and then the intermediate elements that control the position of the rafters in one plane. Then make a box and close the roof. Roofing materials for home should be light, for example:

• Bituminous shingles
• Metal panel
• Profiled film
• Bituminous slate

Wall coverings

The width of the screens should be equal to the degree of installation of the frame rails and the length to the height of the walls.

Security guards are on offer at the workplace in the following order:

1. Plates assembled
2. On the frame there was a polyethylene film as a vapor barrier
3. Guide the inner frame frame
4. Frame facing, heater inserted inside
5. Wind resistant protective membrane
6. Get outer skin

The coat should be compressed over the frame by half the width of the frame frame to hide them.

The perimeter protection frame is covered with a heater and is tightly inserted between the frame frames. Application is done using nails. Using sheet material it may be without frame. The cutting blades are attached directly to the frame and the heater is inserted between the posts.

As can be seen from the description, the construction of a country house with a team of two or three people of average qualification.

Using factory modules significantly speeds up assembly. In just a few weeks after you start installing the frame, you can move into your cottage and enjoy the outdoors.

Videos on weekends

Simple holiday home

How to insulate a plate with your own hands in front of a path

Country houses made of foam blocks: building a house over the summer

Country houses made of foam blocks are lightweight and fireproof.

Thanks to the large dimensions of the blocks and precise dimensions, construction is carried out at high speed. It is quite possible to build a house over the summer.

The use of foam blocks in the construction of various structures guarantees heat conservation and fast pace of work. A country house made of this material will cost more than one made of wood, but less than one made of brick.

What are the benefits of foam blocks?

• Have accurate geometric shape, the dimensions are well maintained.

  Therefore, they can be installed quickly

• Moisture resistant
• Inexpensive
• Strength increases over time
• They have very low thermal conductivity.

  According to this indicator, it is one of the most the best materials for construction

• Have a small specific gravity. Therefore, they are manufactured in fairly large sizes, which has a positive effect on the speed of wall construction
• Easy to handle

But there are also disadvantages

• Cannot bear heavy loads
• Slowly gaining strength.

  In this case, shrinkage occurs.

  DIY country house 6x6. Photo report. Part 1

  And as a result, cracks may occur.

Use high-quality autoclaved foam concrete - it is less susceptible to shrinkage.

For the construction of one-story country houses The strength of foam concrete is quite sufficient. In this case, it is necessary to strengthen the upper load-bearing row with reinforcement.

Foundation

Typically, when building a country house, a shallow strip foundation is used.

It can be done in different ways.

• From prefabricated blocks laid without connection, freely
• From blocks, with device reinforced belts above and below blocks
• Made from rigidly connected reinforced concrete blocks
• Made from monolithic reinforced concrete

The choice of method is made depending on the properties of the soil.

The reinforced tape option is suitable for both subsidence and highly heaving soils. The width of the tape is made to exceed the thickness of the walls by 10-20 cm. Laying depth is up to 60 cm.

Base – within 40 cm.

On heaving soils, it is necessary to install a cushion made of non-freezing material.

Construction of the foundation

Stages of making a strip reinforced foundation with shallow depth.

1. Marking
2. Development of trenches.

   If the soil does not crumble, trenches are made the width of the foundation. Their walls will act as formwork

3. Filling a 30-centimeter sand and gravel bed in layers, compacting each layer.

   The thickness of each layer is 10 cm

4. Laying waterproofing material on the bottom and walls of the trench
5. Installation of formwork under the above-ground part of the foundation (basement)
6. Installation of fittings
7. Pouring concrete

Foundation quality conditions

To build a quality foundation, the following conditions must be met.

• The correct proportions of components in the concrete mixture
• There should be no air bubbles (voids) in the concrete.

  To achieve this, use a vibrator or bayonet the concrete with a metal rod.

• There should be no interruptions during filling

After pouring, until the concrete hardens, it requires maintenance. It must be protected from the sun and watered in hot weather. Insulate in cold weather.

Rolled waterproofing material is laid on top of the foundation.

The overlap of stripes must be at least 15 cm.

Wall masonry

Before you start building walls, you need to check the horizontalness of the foundation. The permissible height difference is 3 cm.

If necessary, leveling should be done with cement mortar.

The upper plane of the blocks laid in the wall must be horizontal. That is, not only the edges running along the wall must be horizontal, but also those across them.

Horizontal control is carried out using a level. The position of the block is adjusted if necessary with a rubber hammer.

First row

The laying of the first row must be done with extreme precision - the accuracy of the construction of the entire house depends on this.

• Find the most high point foundation using a level.

  The first block is laid in the corner closest to this point

• Then blocks are installed in all other corners
• A mooring cord is stretched between the corner blocks along the outer edge of the wall.

  The first row is filled in using it

• If any unevenness in the masonry is formed, they are eliminated with a plane or sanding board. Dirt and dust are removed with a brush

Reinforcement

The reinforcement is laid on foam blocks after filling the first row, and then after laying every fourth row.

A smoothly curved rod is placed in the corners.

• Using a grinder, grooves of 4x4 cm are made at a distance of at least 6 cm from the edge of the block
• The grooves are cleaned of dust and moistened with water.
• Cement mortar is placed in the groove to half the depth
• A rod moistened with water is laid
• The recess is completely filled with solution

A monolithic belt is made at the floor level.

It connects load-bearing walls around the entire perimeter and gives spatial rigidity to the entire structure.

For laying foam blocks the following can be used:

• Cement-sand mortar
• Cement-sand mortar with added lime
• Adhesive for wall blocks

The solution with lime does not set so quickly and has good plasticity.

The glue allows you to make thin seams.

It has a fairly liquid consistency and does not set for a long time.

Block cutting

Usually a row cannot be laid using only whole blocks. You have to supplement it with chopped ones.

You can saw blocks hand hacksaw. The cutting line is drawn with a pencil on two adjacent sides to ensure an accurate cut. The cut surface is leveled with a sanding board or plane. A smooth surface is necessary to ensure good adhesion between the solution and the block.

Load-bearing walls

After laying the first row, you need to wait 1-2 hours until the solution sets.

Then the wall masonry continues.

• Corner blocks are laid and leveled
• The mooring is being stretched
• The row is filled with foam blocks
• Irregularities are removed with a plane or sanding board

The ligation sutures should be at least 10 cm.

The minimum length of the outer blocks (corner, opening) is 11.5 cm.

Internal load-bearing walls are connected to external ones by bandaging.

Partitions

1. The junction of the partition is indicated on the load-bearing wall
2. At this point, flexible connections (anchors) made of stainless steel are inserted into the seam. One end is in the load-bearing wall, the other is in the seam of the partition
3. Anchors are secured with nails

Anchors are inserted into load-bearing wall through the row.

It is allowed not to secure them with nails, but simply press them into the solution.

Door and window openings

You can buy factory-made lintels for ceilings, or they can be made from homemade hollow foam blocks, having a P-shaped cross-section.

1. Mark the locations of the cuts on the foam block
2. Having cut through the grooves, chop off the inner part with a construction hammer
3. Hollow blocks in the shape of an inverted letter U are laid over the opening on wooden supports.

   These can be boards or beams. The supports can be nailed to the side walls of the opening

4. 12-16 mm reinforcement is placed inside the cavity and concrete is poured. The supports remain until the concrete hardens.

You can lay foam blocks over the opening and on metal corners.

Roof

Wooden beams are usually used to construct floors in a foam block house.

The type of roof, its design and shape may vary. Its construction is not much different from this type of work when constructing houses using other building materials.

Exterior decoration

Although foam concrete does not penetrate to a great depth when exposed to moisture, the surface layer absorbs it quite well.

So if the walls are not covered with exterior finishing, they darken and begin to collapse.

As exterior finishing walls made of foam blocks can be used:

• Hinged cladding installed with a gap (siding, decorative panels, house siding with imitation timber)
• Decorative plaster
• Composite panels
• Natural and artificial stone
• Painting with silicone paints

The construction of a country house from foam blocks is relatively inexpensive, and construction occurs quickly.

If you have some construction skills, it is quite possible to make such a house with your own hands.

Video about how to build a house from foam blocks

When building a house on a summer cottage, everyone wants to build one that will be comfortable to live in.

But coziness and comfort depend on internal layout Houses. First of all.

And the layout itself depends on the size of the building, the number of people in the family, and the presence of small children. It also depends on whether you plan to live in the country only in the summer, or whether you want to come here all year round. There are some things you should definitely consider when deciding how to layout your home.

Layout of a one-story country house

Even a small house should have at least three rooms:

The kitchen can be positioned so that the entrance to the house is through it.

In this case, the kitchen room will also serve as a vestibule, which traps cold air if you come to the dacha in winter.

During cooking, the air in the kitchen heats up noticeably, which is also good for heating the house. This option is much better than building a cramped vestibule.

If you want to make a canopy, you can make it out of glass. Using profiles, double glazed windows and glass doors.

If you use your dacha all year round, you need to provide additional heating.

For example, you can plan a country house with a stove in the kitchen, the back wall of which opens into the next room.

This stove will heat two rooms at once. Well, you can install an electric heater in the bedroom. There are many economical modern models.

It should be taken into account that the house heats up much faster if good quality double-glazed windows are installed on the windows. It should be noted that the warmth in the house does not depend on the size of the windows, but on how well they are glazed. The best option is high-quality plastic windows with several panes.

If country house made of laminated veneer lumber contains one room and a kitchen, then the living room is divided by a partition.

A bed is installed behind the partition. This house is suitable for a family of two people.

If there is one more room in the house, albeit a small one, then it is quite possible to arrange a nursery there.

And the dacha will already accommodate a family of four.

These tips are also suitable for those who already have a small garden country house. But many people want to increase the number of rooms and are thinking about building a second floor.

Features of the construction of the second floor

Many people think that a great option for increasing living space would be to arrange a second floor.

But you first need to find out how strong the foundation under the house is. It is likely that it will not be able to support the additional weight. You need to find out about this in advance, and not after cracks begin to appear in the walls and the house begins to collapse.

In addition to this, there are some other features. They must be taken into account before building the second floor.

If there is enough free space, then it is always better to build a spacious one-story house.

It costs less, and living in one-story house more pleasant.

No need to climb stairs. This is especially important if there are elderly people in the house. After all, stairs in two-story dachas are usually steep. They are easier to build than flat ones. Besides two-storey house heating is much more difficult than a one-story house.

If you are installing a second floor, there is no need to concrete floors. It's easier to make them from wood. The house will be warmer. It is best to lift the stairs from the kitchen if it is located immediately outside the front door.

Heat will not escape to the second floor from the living room.

On the second floor there are usually one or two bedrooms. It is best to keep bedrooms small to make them easier to heat. After all, living in a country house, a person enters the bedroom only to sleep.

But, it must be repeated that if the area of ​​the plot allows, then it is better to build a more spacious one-story house instead of the second floor.

Construction of a terrace

Since people spend almost all their time outside in the summer, a covered terrace needs to be added to the house.

It can be located on the entrance side, then the terrace will also play the role of a porch. It needs to be provided with a good roof that will protect it from bad weather and the hot sun. It is also necessary to provide for the fastening of mosquito nets.

Some tips were given on how to make your country house more comfortable.

10 steps on how to build a country house over the summer

If a person plans to build a dacha from scratch, then he can plan it the way his heart desires. But not everything is as simple as it might seem. Below are the most common mistakes that a person makes when thinking about what kind of house to build on his summer cottage.

Of course, everyone’s tastes differ, but still, we will talk about those things that help reduce construction costs and increase comfort.

Mistakes when planning a country house

Too much big house
There is no need to build a house too big.

Thick walls in the house
Walls that are too thick require a more powerful foundation, and therefore extra costs.

Modern technologies make it possible to build lightweight houses, for example, frame houses, or from timber. Good insulation solves all heating difficulties, and the choice of high-quality materials and qualified builders makes the house very durable.

Construction of a basement or ground floor
There is no need to make a large basement or ground floor.

These premises require high-quality waterproofing, insulation, ventilation and heating. For all this you need to hire specialists. Additional costs for building materials are required. Very significant. Also, do not build a base that is too high. This also increases costs.

If you plan to build a fireplace in the house, then you need to build it in the middle so that the heat from it spreads to adjacent rooms.

Fireplace built by outer wall, is completely irrational.

It seems that all things are very simple. But if you avoid these mistakes when planning your house, you can significantly save on building materials and construction time.

Video example of planning a country house using a special program

Posted on: 4-2-2016

For summer residents who are just about to build their first small house My selection of 15 photos of country house design ideas will be very helpful. I must say, there is something to learn here and something to be surprised by, but what can I say - it’s better to see for yourself!

I draw your attention to the fact that there are no diagrams or plans here.

All material is provided for inspiration only. But, an experienced builder, if you show him a picture of a structure you like, he can easily build, if not exactly the same, then close to the original.

The first house simply captivated me with its canopy with a pointed roof. If it weren’t for this roof shape, it would have been just an ordinary country house! Agree, such a canopy roof, supported by slender wooden columns, gave the whole house sophistication and elegance!

A beautiful country house, to say the least!

And in this miniature house I really liked the turret at the very top. In area it is like a temporary shed, but beautiful finish walls, windows, tiles on the roof and this turret make it almost a palace!

By the way, flower boxes mounted under the window greatly improve appearance facade, no matter how small it is!

This house is just very cute, especially the lattice windows and door.

This country house caused a storm of delight among my whole family.

I showed it to them, saying that we would build the same one for ourselves at the dacha. And a miniature terrace, and dormer windows on the roof! Just a peek. A miniature copy of a beautiful country mansion!

There is a lot of light in this house.

Choosing a garden house and its phased construction

because he has a very good big windows. But even in cloudy weather it is light and gives you a feeling of greater unity with nature! The pediment of this house is designed in an unusual way - it is decorated with two balusters.

And in this house there is a second light under the roof. Since there are no windows on one side, something like dormer windows are made under the roof itself.

True, from the photo it is clear that the owners use it as a workshop, but for newly-minted summer residents it could also serve as a shelter at night and from the rain.

Small wooden house with a canopy across the entire width of the roof.

A good solution - here you have a patio terrace, the wall of the house will protect you from the wind, and the roof canopy will protect you from rain and sun.

This little white house is just a fairy tale!

Elegant, romantic, with a pergola attached to it, it invites you to settle in and not know any grief! Still White color adds sophistication to any building, even very small ones.

This interesting asymmetrical house has frame structure and lined with wood.

The uniqueness of this building lies not only in its unusual roof, but also in the glazing of two walls, forming a “transparent corner” at the exit.

This house is simply attractive and well built.

The blue house under a tiled roof with white curtains looks very attractive.

It feels like the house has a caring owner!

And this bright house in front small pond made me smile. It is so small and so harmonious with its blue door and windows with tulle curtains that I wanted to sit down in front of it, dip my feet in the pond and daydream for an hour or two.

This house is made of wood, although it is low, it is very nice.

Well, the last house in the series of 15 best is a house with a trapezoidal canopy.

Beautiful, elegant, tastefully decorated - what else can you say! And there is a terrace next to it - there is a place to admire the stars in the evening!

Ideas for small cozy country houses

We could stop here, but there are so many ideas for small houses that I always want to look for something and share my finds with you.

Let me remind you that in America and Canada, the hobby of designing and creating houses on wheels of unusual shapes is very common. These are real residential buildings. I will continue to introduce you to interesting ideas such houses. After all, if we exclude the wheels, then such houses will look great on our plots! Here is an overview video from the creators of this wonderful house.

There is no translation, but everything is clear.

My construction and life in the country

I would like to tell my story when we decided to live in the country and start all over again. In general, it so happened that our apartments were not there, and in last years we lived in rented apartments. And so life within the walls of others and frequent trips brought us - I wanted my own, peace and stability. But the way we live is not rich and can't buy anything, you decide to buy a Dacha (4sotki) and then another, we left the pages very cheap.

These sites are the same, we prepared that they were forced to leave all the bushes and trees from their homes, and yet they had the resources that I introduced sandstone and sand into the future of our home.

But after a few days we decided to give them a chance to defeat the house in the village, and then I brought the plate and two evenings (as I worked during the day), the house was almost ready. It looked like a trailer, but we were not aware of the beauty, it was already the end of September and cold and winter would soon be upon us. Below is a photo of creating a time zone

Construction of a cottage in the country - the beginning

He built it twice - he wanted it faster, but it got dark early, so he took a battery and a lamp with him. So, this house was looking for another night - it was not yet dark.

It worked like a screwdriver and wire, the design was very simple, so everything was done very quickly.

Cabin construction in the country

I then brought in some foam and the house was insulated with 10cm thick foam and foam sealed all the seams between the foam and all the openings.

He did front door. And the interior, while there were bare slab walls. The next day he brought 200 pieces. red brick and it took two nights to build the brick. A photograph of the furnace design has not survived.

Construction of holiday homes

House dimensions 6.3 * 3m.

interior space 6*2.7, common living room 16.2 square meters, which had to accommodate four adults (me, mom and my two sisters) in the country, electricity, and this is what I thought about in advance. I made a wind generator, I installed a small battery and bought a 12/220 volt converter. The power of such a power plant was very small, because the wind turbine was small and was an irregular dean, also very low. But sometimes one energy-saving light bulb is enough.

All in all, it was a painful start, but a week into this construction, we moved into this period. The transfer took place on October 2, the same day as my sister’s birthday.

In the fall the woods were ready for the winter and a porch was added to the house.

The house is insulated externally with a vapor barrier, covered with film and internal shiny insulation. As a result, in the first winter we found out.

Winter in the country

In winter we were already at home with wind power for every 150 watts, there was enough electricity for lights and sometimes on TV, just as the wind was very weak and there was not enough battery power, but I saved everything for improvement, including the power plant.

I described everything about the plant in the section “My little adventures”,

Therefore, winter lived in such spartan conditions. My sister and I worked, paid in the spring, having accepted a loan 3 years ago, and at the beginning of the summer a new loan appeared, which spent the money on small items and bought a Chinese engine (110ss) to kill a tree, I went to him for a trailer trailer.

We bought a chain saw and two solar panels. up to 100 watts, so they were buying new batteries for the power plant until March.

In the summer, the porch was covered with luminous insulation so that it would not overheat in the sun, and solar panels were installed on the wall.

Even the lights on the street and in the house repeated the wiring.

Solar panels

In the summer, the wood was prepared for the entire year, and the motorcycle made 35 trips from nearby forest stands.

So I bought corrugated cardboard, wood, cement, and I put a new corrugated panel fence on the front.

Wood collection

At the same time, I poured a concrete pad under the base of the future of our house.

There was no swimming under the foundation, it simply grew and leveled the surface and spilled a 40 cm wide strip around the perimeter of the house.

How to build a house in Dachau: characteristics and construction phases

The thickness of the concrete is 10-15 cm. Below the photo are parts of the concrete. This is how we lived in the fall, photo after the rain, there was a bit of a mess outside as I searched and twisted the jars under the winter potatoes.

Life in the country

Life in the country

In addition, 11 meters were excavated in Dachau, I dug it myself, I was in a hurry for almost a month and poured concrete with concrete, but I finished it.

So, the tile broke through. He dug a basement on the site of the future house, filled the basement with concrete, and then made a hatch into the roof. Small details were done on the details, but I will not list all the little things, only the important ones. I wrote about the break here - Well, with my job 2.

Fine

This year, at the beginning of spring, I took 7 plate cubes, bought ruins and cement and started with the main overflow.

The bottom part of the photo is the preparation of the irrigation panels. Last year the center of the concrete base under the furnace was flooded.

Foundation formwork

After installing the panel panels around the perimeter, he reinforced with 10mm cast in two threads.

Then I invested in concrete and ended up like this.

Filling the foundation

The panel was attached with 6mm hex pins and once ejected it was easy to remove and remove the shell.

Filling the foundation

Then build the wall frame. The dimensions of the house are 6.30 * 10.80 m. The skeleton was placed alone, sometimes the truth helped the sister give or save something. All this has turned him into screws that pull themselves. bottom and top, then he used a homemade galvanized sheet metal plate.

DIY decorated house

DIY decorated house

DIY decorated house

DIY decorated house

Currently, the money for further construction has been completed.

Now you need to make money from corrugated cardboard and place a frame around the roof.

Continuation - second part of the frame

Even in the fairy tale of the three little pigs, the most important and always relevant idea is raised about the correct choice of building material for the house. A fairy tale is a fairy tale, but many of us, like the heroes of the famous work, want to build a strong reliable home with minimal effort. However, today it is quite possible to do this thanks to the development construction technologies. However, there are so many different wall materials that the developer has to rack his brains when deciding which material is best to build a house from. Brick, aerated concrete, wood, sandwich panels - which is better, more reliable, more durable and warmer?

The costs of erecting the walls of a house account for up to 40% of the cost of all work, so it is so important to weigh the numerous pros and cons of each material in order to accept the only correct solution. It is also necessary to take into account the seasonality of living in the house, requirements for thermal insulation, the cost of fuel used for heating, as well as the labor intensity of the work and the budget allocated for construction. Today there are a lot of materials for building a house - finding the one that most accurately meets your needs is not a problem.

No. 1. Wooden house

The most conservative and traditional material for the construction of a house - wood. To his undeniable advantages relate:

Minuses:

• high fire hazard, even though special impregnations are used in the production of timber today;
• wood is sensitive to humidity and pests, they are also trying to combat this, but without constant care the material will be constantly damaged;
• shrinkage;
• high price.

Glued laminated timber

No. 2. Brick house

Another classic and time-tested material for building a house is. Despite the emergence of a mass of alternative materials, it remains the most popular material for the construction of low-rise private houses, and there are many reasons for this.

pros:

• high durability and strength;
• inertia, insects and;
• fire resistance;
• the material is breathable;
• brick allows you to turn a project of any complexity into reality.

Minuses:

For the construction of a 2- or 3-story house A brick of strength M100 or M125 is enough, but it is better to build the ground floor from M150-M175 bricks. It is also necessary to take into account the frost resistance of the brick, which is determined by the cycles of freezing and defrosting that the material can withstand without losing its basic properties. If for warm regions it is quite possible to use F15-30 brick, then for middle zone It is better to take material with frost resistance F50, and for the most severe regions - F100. After the house is built, it is given some time to dry. Brick walls, as a rule, they are trimmed.

Based on filling, bricks are divided into:

For the construction of walls, only two types of bricks are used:

• silicate (white).

Ideally, it is better to build from ceramic bricks of plastic formation. It is made from high-quality clay by extrusion. Ceramic bricks of dry and semi-dry formation due to their high precision geometry are mainly used for cladding. It is characterized by durability, good sound insulation and strength.

Sand-lime brick produced on the basis of sand and lime, it is cheaper than ceramic, but more fragile, has a small variety, lower thermal insulation and low moisture resistance.

No. 3. Houses made of cellular concrete

Lightweight concrete blocks are the most promising material for building a house that currently exists. Of all stone materials, cellular concrete has the best thermal insulation properties. Due to the fact that the block is large in size (replaces 17-20 single bricks), the construction of buildings is carried out quickly. In terms of strength and durability, the material is practically not inferior to brick. Cellular concrete includes aerated concrete, foam concrete,, but the first two have become most widespread in private construction.

House made of aerated concrete (aerated block)

House made of cinder concrete

No. 4. Frame house

No. 5. Houses made of reinforced concrete panels

Another option for rapid construction is the technology of constructing houses from ready-made factory ones. A low-rise house can be built in a few days! The technology is reminiscent of that which was so actively used in the Soviet Union for rapid construction millions square meters housing.

pros:

Minuses:

• a solid foundation is needed;
• a small number of offers on the market (few companies cast slabs for the created project - usually elements of typical sizes are manufactured);
• such a house “does not breathe”;
• Concrete does not hold heat well.

When you need to quickly build a reliable and durable house of decent size, then this is one of the best options, especially since today it is possible to cast panels of strictly required shapes and sizes in order to erect a building according to.

When choosing material for building a house, it is important to take into account the climate, the type of soil, the future heating system, and many other factors. But even the highest quality building materials can disappoint if construction technology is violated or the foundation is laid incorrectly, so these points should be given no less importance.

If you decide to build a house on your own summer cottage, then the first problem that will arise for you is what material to use for the work. In addition, other questions may haunt you during such a process. What can you build a house from? What will be more practical? Which material will last longer? Choose a regular brick or try modern technologies? And if you are really concerned about such questions, then from this article you can find out the answers to them.

So, now you have a huge selection of building materials than a couple of decades ago. Today you can build a house from gas silicate blocks or wood. You can also build a house on your site using frame-panel technology. But no one canceled brick either. Some entrust the construction of their house to specialists, and very soon they are happy with a beautiful brick house. As a result, it is up to you to decide what to build a country house from. We, in turn, would like to tell you about the different materials for building a house. About their properties, different costs, moisture resistance, sound insulation, all the pros and cons and much more.

Building a brick house

This article will allow you to find out what is best to build a country house from. First of all, it’s worth talking about a popular building material - brick. So, brick is the most durable material. A house made of brick structures will last you approximately 100-150 years, or maybe more.

Elderly city residents can confirm that in their cities there are many different, very old buildings that are over 100 years old, they are all intact and built of brick. But let's not advertise the brick too much. A building made from it will be durable and will last a long time only if the brick is of high quality, and for ready home will be well looked after. Of course, building a house out of brick is not so simple, and if during construction technical errors, then the quality of the house will not be adequate.

In this case, the thermal insulation decreases and the weather resistance will no longer be the same. The main factor is dampness; over time it can destroy the masonry. We would like to note that in order for the finished brick building to be more resistant to dampness, it must be plastered. First you need to seal all the cracks and holes with cement, rub the seams, and only then begin plastering and insulation.

For insulation, the technology of ventilated facades is used, when pieces of insulation are attached to the surface of the wall, covered with membrane-like moisture insulation, and then decorated with siding, lining or something else. There is no other way to prevent moisture from entering the brick. But it is impossible to allow moisture to get inside the brick. If moisture penetrates through best quality plaster into a brick, then it expands when it freezes and forms small gaps, which will subsequently lead to cracks in the building. Most of all, this applies to country houses in which there is no heating. Therefore the plaster brick house give maximum of your attention.

From all that has been said, we must conclude that brick building It will last a long time, but it needs careful care, supervision, and also, such houses take a long time to build.

We use a gas silicate block for the construction of a country house

The gas silicate block is suitable for those residents who want to know the answer to the question of what to build a country house from cheaply. We would like to note that the gas silicate block is a building material large sizes, it is about 8 times larger than a brick, has a low density, about 2 times lower than a brick. The technology for building a house from blocks and bricks is approximately the same. In general, a gas silicate block is a huge brick, only with better properties. Why is a gas silicate block better than a brick?

• First, it is large, so the house is built much faster.
• Second, the block is easier to process. It is easy to saw it in half, drill it and do other things with it. Therefore, it is much easier to lay communications in such a house. This is very convenient when you are building a building where people will live all year round. Therefore, the wiring will need to be laid inside the wall, and not outside, as happens in many country houses.
• Third, when gas silicate blocks are made, they use an unusual, porous technology. There are small air particles inside the block. This greatly reduces the likelihood that the house will freeze and increases thermal conductivity. It turns out that gas silicate blocks retain heat much better. If you want to build something huge, then purchase gas silicate blocks with a tongue-and-groove “lock” of the connection. Thus, you will reduce the number of joints, and this will increase the safety of the building from drafts.

The advantages of wood in the construction of a country house

This publication will provide you with the answer to the question of what to use to build a country house with your own hands. Above we described two building materials that can be used for this matter. Now it’s worth talking about such a material as wood.

Wood comes in three varieties:

• rounded log;
• timber (planed or profiled);
• glued wood materials.

In the Russian Federation, wood is the most common material for building a small house. This is due to the availability, good reserves and excellent performance properties of wood. In addition, wood is a fairly cheap material. More expensive, we can offer laminated veneer lumber. It is more resistant to moisture and almost does not shrink, which is why it costs several times more.

If we list the best properties of wood, we get the following:

1. Wood has good thermal insulation,
2. Wood allows air to pass through well and absorbs excess moisture,
3. Wood can “breathe”.
4. Natural wood has a pleasant aroma that you will inhale for a very long time.
5. Wood has low resistance to fungus, mold and rot.

Frame-panel houses on a summer cottage

Frame- panel house- This latest technology. The main material for building your country house will be sandwich panels. These panels are attached to a pre-installed frame. It is necessary to build a house frame from large-section timber that can withstand a lot of weight. Then sandwich panels are attached to them, which adjust the walls of the house. Sandwich panels consist of oriented strand boards with insulation between them. A house with an area of ​​about one hundred square meters made of sandwich panels is erected in 25-30 days.

Finally

So we told you about what to build a country house from. All these materials will help you build a reliable and comfortable building on your summer cottage. And remember that whatever you choose to build your house, we wish you successful construction and a lot of wonderful and bright days in your new home!

A suburban area is not only land with a vegetable garden and plantings. Many city residents come there for a good rest, so it is necessary to have a house on the site. Not all summer residents have the opportunity to build a comfortable house on six acres. Many people get out of this situation by choosing the option of building an economy class house.

Inexperienced and novice summer residents are faced with the question of choosing cheap materials for construction. Below are examples of inexpensive and cozy country houses with visual photos.

Where to start construction

Any construction begins with a plan on paper. A house outside the city is not intended for year-round residence, but for the sake of comfort it requires familiarization with the standard project.

Among the projects of country houses, the ones with an attic or attic are in the lead. This option allows you to avoid building outbuildings on the site. All equipment and work tools are stored in the attic. In addition to such a house, you can add a veranda or terrace that serves as a dining room.

Strip foundation requires more time and costs. Positive side it is that it allows you to use the room under the floor as a basement.

The next stage of preparation is the material of the “box” of the future building. There are several types of inexpensive and reliable building materials:

Frame-panel structures

The frame is mounted using timber and sheathed wooden boards Fiberboard or chipboard. Expanded polystyrene, glass wool or polystyrene are used as insulation. The result is a house with minimal costs that can be used all year round.

A house made of timber is distinguished by its durability. Construction work will cost more. When using cheap timber, you are likely to encounter the problem of building shrinkage. As a result, cracks and gaps appear. The cobbled house will also have to be insulated.

A clay house is the cheapest and easiest construction option. Construction materials are right under your feet. The construction technique is similar to clay sculpting.

The downside is that the construction process is too time-consuming. It will take several seasons to build a clay dwelling.

The trailer is common among new summer residents. The best option for living in the summer or during the construction of a comfortable house.

Construction of frame structure

Frame construction belongs to the low-budget category. Building a country house with your own hands without the help of specialists will not be difficult. If all the necessary materials are ready, the work will last several weeks.

To build a house you will need:

• beams for the frame;
• screws and corners;
• wooden chipboards or fiberboard;
• insulation;
• piles for the foundation.

Stages of building a frame house

At the marked places, piles are driven in the corners. Install concrete or brick supports under the joints of the walls. Then they are covered with waterproofing material and tied with a channel.

A lattice of beams is laid around the entire perimeter. They put it on top wooden joists at a distance of 50-60 cm from each other. All parts are secured with corners and self-tapping screws.

Next they mount vertical racks, firmly resting against the bar grate. The finished frame is tied and attic logs are placed on top of it. Next comes work on covering the frame. wooden slabs. At this stage, holes are left for windows and doors.

Now you need to decide on the choice of roof for your country house. Most summer residents choose gable and pitched roofs. To save money, the second option deserves more attention. When building a roof, do not forget about vapor barrier. The roof will be inexpensive sheets of corrugated board or ondulin.

External cladding is done using siding. Before this, the outer walls are insulated with special materials. Instead of plastic windows install ordinary wooden ones without double-glazed windows. This approach will significantly reduce the cost of construction.

With the help of simple and simple tips the country house will be ready for use in less than a month. Those who do not have enough time for construction can contact construction company, where they will offer to build a turnkey cottage for a reasonable price.

A few words about the interior

No matter how the house looks from the outside, the inside of the country house must meet all the requirements of modern times. Gone are the days when dacha dwellings were used for cooking and sleeping.

Relaxing at the dacha means, first of all, comfort and organization inside the house. There are many budget-friendly ways to satisfy your most desired interior design needs.

Country – country style in the interior. Here you can’t do without cabinets and shelves covered with curtains with embroidery. Crocheted napkins, tablecloths and rugs made from old clothes will look good.

Owners of suburban areas now have an excellent opportunity to assemble inexpensive houses with very good prices. performance characteristics. There are several ways to construct an economical and reliable building these days. In this article we will talk about what is cheaper to build houses from.

What factors influence the cost

Save money during construction country house Can:

• Having drawn up the project correctly. A compact house with a well-thought-out layout will cost less than a large “chaotic” building and will be no less comfortable.
• By choosing the right material for walls, roofing, ceilings and finishing.

It is the latter factor that often plays a decisive role in terms of project cost.

Materials for how to choose

When deciding what exactly the walls of the house, its floors and roof will be built from, you need to pay attention to the following factors:

• Climatic conditions. In cold regions, it is better to use materials that are not as durable, but definitely warm. Owners of plots located in the southern regions of the country have a much wider choice. In this case, you can use absolutely any modern inexpensive materials.
• Specific properties of materials. Of course, buildings made of SIP panels or foam concrete are much cheaper than brick or log houses.
• Features of the local market. For example, wood may be cheaper in forested regions, and concrete in steppe regions.

The most economical building materials

So, now let's see what is cheaper to build houses from. A very economical and convenient building can now be erected using:

• Timber and modern insulation. This is the most inexpensive type of building at the moment. At the same time, despite their low cost, panel houses have very good performance characteristics. In this case, inexpensive materials are also used as cladding. Most often this is plywood and siding.
• SIP panels. Such a building will cost more than a panel building, but it will also be erected faster.
• Foam blocks. Buildings constructed from them are also very inexpensive and are considered somewhat more reliable than panel buildings.

All these modern materials are very suitable for building a house and can last a long time. Next, let's talk about the advantages and disadvantages of each of them. Perhaps this will help someone make the best choice.

Advantages of frame buildings

Houses made of wood of this type, in addition to being cheap, also have such advantages as:

• Ease of construction. You can build a frame-panel house yourself, without involving specialists. When constructing such a building, there is no need to use any expensive equipment. The most inexpensive foundation for a panel house can be poured - a columnar one (of course, only on reliable soil).
• Excellent heat-retaining qualities. Such houses are insulated from the cold using modern, inexpensive materials. Usually this is mineral wool or polystyrene foam. Even not too expensive non-profiled timber is used in this case in minimal quantities - only for the construction of the frame.
• Aesthetic If you use high-quality internal and external cladding, choosing this technology, you can actually get a very beautiful and at the same time comfortable building.
• No shrinkage. Unlike expensive cobblestone and log buildings, you can move into a house built using this technology immediately after its construction.

Disadvantages of panel buildings

Timber and modern insulation are simply an excellent answer to the question of what is cheaper to build houses from. But of course, like any other method, this building construction technology also has its drawbacks. The disadvantages of frame-panel houses include, first of all, not too high a degree environmental safety. The fact is that mineral wool and expanded polystyrene are materials certain situations capable of releasing When building a house, this must be taken into account and done interior lining as tight as possible. Mineral wool Expanded polystyrene releases toxic styrene.

The disadvantages of panel structures also include a not very high degree of fire resistance. It is best to entrust the wiring in such a house to a specialist. Even though this will entail additional costs. You will also have to spend money on processing wooden frame antiseptic and fire resistance-increasing compounds, as well as insect repellents. As you know, only if these products are used, wooden houses can be quite durable.

Owners of remote summer cottages often refuse to erect such buildings due to the not very high mechanical strength of the walls. Thieves may not even need to pick the lock to break into such a home without security.

Advantages of buildings made from SIP panels

This type of building is structurally very similar to the previous one. In fact, this is just a type of panel house. The only difference is that the elements of a building of this type are assembled from panels already supplied in finished form. Of course, when using such material the construction is more reliable and durable. Houses made from SIP panels are not too expensive. However, their cost, as already mentioned, is slightly higher than that of conventional panel boards.

SIP panels consist of two OSB boards, between which polystyrene foam is fixed. Despite their apparent fragility, due to their structural integrity they are able to withstand enormous loads and are actually simply ideal for buildings. You can also erect a building from this material yourself. There is no need to pour an overly thick foundation under SIP walls. The advantages of this material include a very low degree of thermal conductivity.

As in the case of a frame-panel house, the construction of such a building does not require the use of expensive equipment. The panels are processed simply - using a regular hacksaw. Therefore, houses made from SIP panels can have any layout and architecture.

Disadvantages of SIP buildings

The disadvantages of such houses are approximately the same as those of conventional frame-panel houses. That is, they are no different fire safety and environmental cleanliness. In addition to polystyrene foam, in this case OSB panels are also used, the safety of which is highly questionable. Some disadvantages of SIP panels include the fact that they can only be used to build houses of limited height (maximum 2 floors). Engineering Communication in buildings of this type it is quite difficult and expensive to carry out. This can also be attributed to the disadvantages of such buildings.

Advantages of houses made of foam blocks

This material is slightly more expensive than SIP panels. However, the cost of the foam block is still low, and the difference in price in this case is not critical. In addition, in comparison with SIP buildings and panel buildings, houses made of this material have many advantages. These include:

• The ability of walls to “breathe”. In this regard, buildings made of foam blocks are comparable to, for example, comfortable structures such as log houses. The microclimate in buildings constructed from this material is created almost the same.
• Fire resistance of walls. Concrete, as everyone knows, does not burn.
• Durability. By definition, such a building can last much longer than a wooden structure. Concrete does not rot and is not damaged by insects.

Disadvantages of houses made of foam concrete

The disadvantages of such buildings include, first of all, the need for careful waterproofing of the foundation and the use of materials that prevent moisture from penetrating the walls. Inexpensive houses made of foam blocks should be protected as thoroughly as possible. The fact is that this porous material absorbs moisture very well. In this case, its heat-preserving qualities are lost. Moreover, wet blocks of this type crumble easily, which can even lead to the appearance of cracks in the walls.

Despite the fact that foam concrete is lightweight, the foundation for it should be sufficiently powerful and reliable. It's all about the fragility of this material. Foam concrete can crack even with small movements.

The disadvantages of this material, in comparison with SIP panels, include some difficulty in constructing houses when using them. To build, you need to fasten foam blocks special glue. In this case, the seams, unlike concrete ones, are very thin and do not allow cold to pass through. However, masonry using this method involves the use of blocks of ideal geometry. But despite existing standards, material with various types of defects is often sold on the domestic market.

From all of the above we can draw a simple conclusion. You should buy foam blocks only from large manufacturers who value their reputation and supply the market with fairly durable material with ideal geometry.

Cost of materials

For the construction of building walls, structural and thermal insulating foam blocks are usually used. Their price depends on the size, manufacturer and supplier. For a D500-D600 block, for example, you can pay from 47 to 185 rubles. The cost of a foam block with the most convenient dimensions of 20x30x60 mm is usually 135-150 rubles.

Price for SIP panels different sizes can be seen in the table below.

Thus, the price of a house made of SIP (or rather, only its walls) measuring 5x5 m with a ceiling height of 250 cm and a wall thickness of 12 mm will be 47,200 rubles, not including the cost Supplies. Of course it's not too expensive. Foam blocks of the same size will cost about 55,000-60,000 rubles, which is also quite cheap.

What to make the floors and roof from

The use of SIP panels and foam blocks significantly reduces the cost of building houses. From different materials modern type, such as metal tiles, ondulin or corrugated sheets, can be assembled for a country building and a very inexpensive roof. Floor and ceiling in budget house usually sheathed with a simple edged board.

As for the frame of the floors and roof, there is, of course, not too much choice. Joists, beams and rafter system usually made from timber. And they use fairly thick material. After all, such structures are load-bearing and must withstand serious loads. Therefore, of course, it is not worth saving on them. However, the price for ordinary non-profiled timber is not too high.

Thus, using the materials described above to build a house, you can save a lot of money and at the same time get reliable and environmentally friendly structures.

How to choose an edged board

When choosing this material, you should pay attention to two factors:

• Presence of knots. There should be as few of them as possible. Especially the dark ones. Such knots will inevitably fall out over time, and unsightly holes will form in the floor or ceiling.
• Geometry of the material. All selected boards must have the same thickness and be even in all planes.

Advantages and disadvantages of metal tiles

In addition to the low price, the advantages of this material, which is most often used to assemble inexpensive roofing, include:

• light weight,
• strength and durability,
• aesthetic appearance,
• ease of installation.

The disadvantages of metal tiles are:

• noisy when it rains,
• ability to rust and click in the sun if not installed correctly.

As you can see, the answer to the question of what is cheaper to build houses from is not too complicated. Choosing inexpensive materials for the construction of walls, floors and roofing of a building is very simple these days. Of course, when drawing up a project, everything should be carefully calculated and thought through. In this case, the house will be economical, reliable and comfortable.