How to decorate old doors. How to restore old doors or give door panels a new life

The interior door occupies an important place in the interior of the room. It not only serves as a barrier to noise, delimits space and allows privacy, but is also a noticeable piece of decor.

Several reasons may motivate you to decorate an interior door:

1. Firstly, despite the huge selection of ready-made (and very attractive) doors, it is sometimes very difficult to find suitable model. Sometimes all the doors seem the same - “I’ve already seen this one at the neighbors’, “and this one looks like the door to our office.” You don’t want to repeat yourself and buy something that is unoriginal and has become banal, because your interior is unique, so the door should match.
2. Secondly, even an old door with scratches, peeling paint and irremovable stains is why you often don’t want to replace it! After all, any replacement of a door is also a replacement of the frame itself, which is associated with dust, plaster, sealing the resulting cracks, the need to change the wallpaper (at least around the new door) - in general, with local and sometimes major repairs.

That is why sometimes it is much easier for the owner to update already installed door“on the spot,” that is, without changing the entire box, right here in the room. Of course, in some cases you will still have to remove the door from its hinges, but this is much easier and faster than undertaking a full-fledged repair. Whatever the reasons that prompted you to start decorating an interior door, we’ll say right away that often this requires practically nothing except materials left over from the previous renovation.

So, we offer you 14 ideas for decorating an interior door that you might want to bring to life when decorating your interior.

The first idea. We paint, we just paint

The easiest way to get your door in order without any frills or extra work. To do this, you will first need to remove the door from its hinges, then go over it with a spatula, removing old paint, level the surface with sandpaper, seal cracks and scratches with putty, remove grease stains, cover the glass with masking tape so as not to stain it, and you can pick up a roller or brush! It is better to choose acrylic paint - it dries faster, and paint the door in a horizontal position - this way the paint will not drip and will lie more evenly. However, if it is convenient for you to do all of the above on a vertically standing door, you don’t have to remove it from its hinges. Just remember to put something on the floor while painting so as not to stain the linoleum or laminate.

White, simply painted door. Renewing it or repainting it in a different color will not be difficult, although the moldings and carvings need special, careful handling during sanding and removing the old paint layer

Idea two. We paint in several colors

The option is more complicated, although it also involves coloring. In this case, we don’t just paint the door one color, but create a simple or complex geometric pattern of stripes, squares, diamonds, and so on. The door must first be prepared, as in the first case - that is, cleaned of old paint and leveled the surface. However, in this case, we will need much more masking tape - it is with its help that you will delimit the zones between stripes or rectangles. In addition, in order not to buy several cans of paint of different colors, you can buy white paint (one liter per door is enough), as well as several dyes with which you can experiment with shades.

Gold and white, blue and soft pink, bright stripes on a neutral background, diamonds and winding lines - a variety of patterns and patterns can appear on your door leaf. color combinations

When choosing a geometric pattern, remember that a wide strip along the entire door leaf is more suitable for country style, but for classics it is better to choose other options, for example, top part paint the doors a lighter shade and separate the parts with a horizontal stripe

Idea three. Highlighting moldings

Also painting the door, which in general is not too different from the first option. However, in this case we will focus on the moldings, painting them in a contrasting color. White and black are a great but overused combination, so think about what colors will look best next to each other. Designers have long recognized white and green, blue and yellow, red and dark blue as excellent options. Such a door will look great both in a bohemian boudoir and in a strict classic living room.

A white door with highlighted black moldings is a true classic. By the way, if your door does not have such decorations, it is easy to make them yourself - special thin wooden strips are sold that are simply nailed onto the door leaf

An unexpectedly bright, pink door that looks especially aristocratic and attractive thanks to the frames highlighted in white

Idea four. We paint according to the finished stencil

A very convenient and simple way to turn your door into a work of art, even if you do not have the talent of an artist. Ready-made stencils can be purchased in construction and specialized stores, or ordered on one of the websites, and the choice of designs and patterns is very large. Then we simply apply the stencil to the already prepared door and apply paint. Easy, fast and the result is very beautiful!

Applying a drawing using a ready-made stencil is as easy as shelling pears, and the choice will allow you to choose an original inscription, an exotic pattern, or an unusual picture

Such a deliberately simple design can be easily created without stencils. It was the uneven lines and simplicity that became its main highlight.

Idea five. Artistic painting

Unlike all the door decoration options already listed, this option is not for everyone. To create a real masterpiece on an ordinary door, you will need the talent of an artist and certain skills in working with brushes, since a roller is no longer enough. Imagine that your door is a blank white canvas, on which, thanks to your skill, a beautiful landscape, a cheerful painting or an exquisite pattern will appear. Fine hand painting always looks expensive and stylish, and you can achieve this effect by spending only on the purchase of paints.

Ready-made interior doors with artistic painting offered by many European companies. They are, of course, not cheap, so you can try to create something similar with your own hands. Are you afraid that it won't work out? You can always just paint over a bad drawing!

Idea six. Children's creativity

Does your little one love to draw? Give him this opportunity - let him decorate the door to the children's room himself. Yes, such a naive, bright pattern would be out of place in a formal living room, but as a decoration for a child’s room it is an excellent option. Just agree with the young artist that the second half of the door is already your field for realizing your fantasies!

Usually children's paints are washed off very easily, so your novice artist will be able to paint the door again every day. But you will have to first prepare the canvas by putting the door in order

Idea seven. Unusual texture using paint

If you think that simply applying paint is boring, and you are afraid to take on hand painting, you can try to achieve an unusual texture, for example, the effect wooden surface or an antique door using a very simple devices. So, using a sponge you can get a mottled surface, steel wool can help you achieve the effect of an antique door, and a stiff brush can create an expressive surface on denim. Special ready-made paints are also sold that perfectly imitate jeans, wood, canvas, velvet or slate.

On such a door, painted to resemble a chalkboard, it is convenient to leave messages for household members

Idea eight. Photo wallpaper

If all the previous ideas concerned only working with paints and brushes, then this method is suitable for those who do not want to mess with paint. Photo wallpaper will instantly transform appearance your interior door, turning it into bright element design. Of course, it is best to purchase photo wallpaper designed specifically for doors - in this case, your drawing will definitely look complete. Ready-made photo wallpapers usually have a standard size of 86x220 centimeters, therefore they are suitable only for standard doors, and without moldings and glass inserts. However, now many online stores offer custom-made photo wallpaper for doors, so you can choose the option that is ideal for your door, with any pattern. You can cut doors and regular wall murals to size, but in this case the design may look unfinished.

How do you like this unusual option- a door turned into a telephone booth with the help of photo wallpaper?

Before sticking photo wallpaper, the door must be cleaned of stains, and the surface must be leveled, sanded and degreased with a solvent. You can use regular wallpaper glue, but PVA is much more reliable. The disadvantages of this option for decorating a door include the fact that a bright image will immediately catch your eye, so it can quickly get boring. In addition, photo wallpaper on the door will lose its original attractiveness due to frequent touches. However, no one will stop you from changing the photo wallpaper on your door to something more original in a couple of months.

Photo wallpapers with picturesque landscapes are especially popular

Photo wallpaper on the door will help, due to the increased panoramic perspective, to make small room visually more. And it’s very easy to stick them on; you don’t even need to remove the door from its hinges.

Idea nine. Regular wallpaper

Previously, this decorative option was particularly popular, but now many designers consider it bad manners. It doesn't bother me regular wallpaper, “migrated” to the door, remains a popular way of decorating the interior. As an option, you can buy cork wallpaper and coat it with varnish on top for reliability. Their unusual texture will make the door more original.

Preparing the door is exactly the same as when using photo wallpaper. The main advantage is low cost, since you can use wallpaper left over from a previous renovation, and ease of decoration. Main disadvantage- rapid wear - at the joints the wallpaper can peel off and tear.

A door covered with the same wallpaper as the walls will literally blend into the interior. The reverse side of the door, of course, is covered with other wallpaper so as not to stand out against the background of the wall of another room.

Idea tenth. Fabric instead of wallpaper

This option will look especially cute and homey. A door decorated with fabric looks original; the choice of fabrics today is surprisingly wide, but this method also has its drawbacks.

If you choose a single piece of fabric to decorate a door, you should take care of the original design

First, when choosing a fabric, you should make sure that the glue will not leave stains on it. Secondly, the edges of the fabric should be pre-treated, otherwise the protruding threads will not look very aesthetically pleasing. Thirdly, doors decorated with fabric will not suit every interior design style. Those who are interested in patchwork, that is, creating canvases from different pieces of fabric, can turn their door into a real applique of bright scraps. By the way, if there is space on the door for a glass insert, you can hang a small curtain here, securing it with fishing line and small nails.

A very cute door, decorated using patchwork technology. The trouble is that such bright patches have nothing to do with the classic interior style; this is an option, rather, for “rustic” and colorful country

Idea eleven. Posters, cards, paper

An option for creative people and a great idea for a teenager's room. The door can be decorated with a poster and an image of your favorite artist or group, sheets from an old geographical atlas, or sheet music. Pasting such paper sheets and posters is as easy as regular wallpaper.

Antique geographic map would be appropriate even on the interior door of an ordinary living room, but posters are better “placed” in a teenager’s room

Idea twelfth. All kinds of stickers

This simple and not too expensive way of decorating a door is becoming more and more popular today. Vinyl stickers can be purchased in online stores, the cost of a model the size of a standard door starts from 2.5 thousand rubles, they are very easy to apply and will last longer than ordinary photo wallpapers.

If you do not want to hide the entire door behind stickers, it is quite possible to purchase small images - a butterfly, bright flower and so on. They cost less, and will completely transform the appearance of the door. “Informative” stickers are also popular, for example, on the door of an office, bathroom or toilet, which will tell guests what is hidden behind this door.

The elegant lady on this sticker will immediately inform guests of the house that the bathroom is hidden behind this door

Often the stickers may look like regular photo wallpaper, and sometimes - like hand painting on a white door or a child’s drawing

Idea thirteen. Decoupage

The technology of meticulously cutting out the images you like from paper and then making appliqués from these pieces allows you to transform not only a box or photo album cover, but also an ordinary door. Everything a beginning master of the ancient art of decoupage will need: paper drawings, napkins with a pattern you like, postcards and the like - everything from which you can cut out a design, a brush, PVA glue, scissors, glitter, acrylic varnish, outline and acrylic paint.

In the decoupage process, you can literally use anything - from scraps of old newspapers to greeting cards

IN brief description the process looks like this: apply a layer of white acrylic paint to the surface of the door, wait until it dries, then another layer - and again wait until it dries completely. Then we apply a layer of paint of the selected shade, and then use PVA glue to attach the cut out paper drawings. At the same time, we try to glue the piece as smoothly as possible, without folds, and to expel all air bubbles. Using glitter and contour we can draw dots, stripes and others small parts. Then we cover the finished picture with a layer of varnish. That's all. The rest is your imagination and beautifully selected drawings.

The decoupage technique allows you to create amazingly beautiful paintings, and the varnish coating will extend the life of the decor

Idea fourteen. Mosaic

A door decorated with bright mosaics will be an excellent option for a bathroom; you can decorate a metal one in this way front door. Moreover, it is not at all necessary to use pieces of ceramics for these purposes - in this case the door may turn out to be too heavy. Mosaics can be created from pieces of wood or veneer, or you can purchase a ready-made one made from glass.

In this case, a bright glass mosaic occupies most of the door, making it very unusual and cheerful.

The mosaic is attached special glue(Moment or liquid nails are suitable) onto a prepared and cleaned surface. It is worth thinking through all the details of the pattern in advance by drawing a diagram of the arrangement of the pieces with a pencil. By the way, you can decorate not only the door itself, but also the frame with mosaics, highlighting the slopes using the selected pattern.

Creation mosaic pattern- huge scope for creativity. And if any part does fall, you can always attach it back

An old door can become a real art object; all you need is a little imagination and effort. To get started, you can use one of the most simple ideas, and then, having gained a taste for it, try yourself in the art of decoupage or painting. In any case, your door will definitely be one of a kind!

The interior door occupies an important place in the interior of the room. It not only serves as a barrier to noise, delimits space and allows privacy, but is also a noticeable piece of decor.

Several reasons may motivate you to decorate an interior door:

1. Firstly, despite the huge selection of ready-made (and very attractive) doors, it is sometimes very difficult to find a suitable model. Sometimes all the doors seem the same - “I’ve already seen this one at the neighbors’, “and this one looks like the door to our office.” You don’t want to repeat yourself and buy something that is unoriginal and has become banal, because your interior is unique, so the door should match.
2. Secondly, even an old door with scratches, peeling paint and irremovable stains is why you often don’t want to replace it! After all, any replacement of a door is also a replacement of the frame itself, which is associated with dust, plaster, sealing the resulting cracks, the need to change the wallpaper (at least around the new door) - in general, with local and sometimes major repairs.

That is why sometimes it is much easier for the owner to update an already installed door “on the spot,” that is, without changing the entire frame, right here in the room. Of course, in some cases you will still have to remove the door from its hinges, but this is much easier and faster than undertaking a full-fledged repair. Whatever the reasons that prompted you to start decorating an interior door, we’ll say right away that often this requires practically nothing except materials left over from the previous renovation.

And one should not think that real craftsmen and needlewomen will be able to cope with such a task - some of the ideas proposed in this article can be implemented even by a person who has never held a hammer or brush in their hands. And the result of your work, in any case, will be original, unusual and will become a source of pride - “here it is, our door, I made it myself (well, at least I decorated it).”

So, we offer you 14 ideas for decorating an interior door that you might want to bring to life when decorating your interior.

The first idea. We paint, we just paint

The easiest way to get your door in order without any frills or extra work. To do this, you will first need to remove the door from its hinges, then go over it with a spatula, removing the old paint, level the surface with sandpaper, fill up cracks and scratches with putty, remove greasy stains, cover the glass with masking tape so as not to stain it, and you can take it to the hands roller or brush! It is better to choose acrylic paint - it dries faster, and paint the door in a horizontal position - this way the paint will not drip and will lie more evenly. However, if it is convenient for you to do all of the above on a vertically standing door, you don’t have to remove it from its hinges. Just remember to put something on the floor while painting so as not to stain the linoleum or laminate.

White, simply painted door. Renewing it or repainting it in a different color will not be difficult, although the moldings and carvings need special, careful handling during sanding and removing the old paint layer

Idea two. We paint in several colors

The option is more complicated, although it also involves coloring. In this case, we don’t just paint the door one color, but create a simple or complex geometric pattern of stripes, squares, diamonds, and so on. The door must first be prepared, as in the first case - that is, cleaned of old paint and leveled the surface. However, in this case, we will need much more masking tape - it is with its help that you will delimit the zones between stripes or rectangles. In addition, in order not to buy several cans of paint of different colors, you can buy white paint (one liter per door is enough), as well as several dyes with which you can experiment with shades.

Gold and white, blue and soft pink, bright stripes on a neutral background, diamonds and sinuous lines - a variety of patterns and color combinations can appear on your door leaf

When choosing a geometric pattern, remember that a wide strip along the entire door leaf is more suitable for country style, and for classics it is better to choose other options, for example, paint the upper part of the door in a lighter shade and separate the parts with a horizontal stripe

Idea three. Highlighting moldings

Also painting the door, which in general is not too different from the first option. However, in this case we will focus on the moldings, painting them in a contrasting color. White and black are a great combination, but it's a tired one, so think about what colors will look best next to each other. Designers have long recognized white and green, blue and yellow, red and dark blue as excellent options. Such a door will look great both in a bohemian boudoir and in a strict classic living room.

A white door with highlighted black moldings is a true classic. By the way, if your door does not have such decorations, it is easy to make them yourself - special thin wooden strips are sold that are simply nailed onto the door leaf

An unexpectedly bright, pink door that looks especially aristocratic and attractive thanks to the frames highlighted in white

Idea four. We paint according to the finished stencil

A very convenient and simple way to turn your door into a work of art, even if you do not have the talent of an artist. Ready-made stencils can be purchased in construction and specialized stores, or ordered on one of the websites, and the choice of designs and patterns is very large. Then we simply apply the stencil to the already prepared door and apply paint. Easy, fast and the result is very beautiful!

Applying a drawing using a ready-made stencil is as easy as shelling pears, and the choice will allow you to choose an original inscription, an exotic pattern, or an unusual picture

Such a deliberately simple design can be easily created without stencils. It was the uneven lines and simplicity that became its main highlight.

Idea five. Artistic painting

Unlike all the door decoration options already listed, this option is not for everyone. To create a real masterpiece on an ordinary door, you will need the talent of an artist and certain skills in working with brushes, since a roller is no longer enough. Imagine that your door is a blank white canvas, on which, thanks to your skill, a beautiful landscape, a cheerful painting or an exquisite pattern will appear. Fine hand painting always looks expensive and stylish, and you can achieve this effect by spending only on the purchase of paints.

Many European companies offer ready-made interior doors with artistic painting. They are, of course, not cheap, so you can try to create something similar with your own hands. Are you afraid that it won't work out? You can always just paint over a bad drawing!

Idea six. Children's creativity

Does your little one love to draw? Give him this opportunity - let him decorate the door to the children's room himself. Yes, such a naive, bright pattern would be out of place in a formal living room, but as a decoration for a child’s room it is an excellent option. Just agree with the young artist that the second half of the door is already your field for realizing your fantasies!

Usually children's paints are washed off very easily, so your novice artist will be able to paint the door again every day. But you will have to first prepare the canvas by putting the door in order

Idea seven. Unusual texture using paint

If you think that simply applying paint is boring, and you are afraid to take on hand painting, you can try to achieve an unusual texture, such as the effect of a wooden surface or an antique door, using very simple tools. So, using a sponge you can get a mottled surface, steel wool can help you achieve the effect of an antique door, and a stiff brush can create an expressive surface on denim. Special ready-made paints are also sold that perfectly imitate jeans, wood, canvas, velvet or slate.

On such a door, painted to resemble a chalkboard, it is convenient to leave messages for household members

Idea eight. Photo wallpaper

If all the previous ideas concerned only working with paints and brushes, then this method is suitable for those who do not want to mess with paint. Photo wallpaper will instantly transform the appearance of your interior door, turning it into a striking design element. Of course, it is best to purchase photo wallpaper designed specifically for doors - in this case, your drawing will definitely look complete. Ready-made photo wallpapers usually have a standard size of 86x220 centimeters, so they are suitable only for standard doors, and without moldings and glass inserts. However, now many online stores offer custom-made photo wallpaper for doors, so you can choose the option that is ideal for your door, with any pattern. You can cut doors and regular wall wallpaper to size, but in this case the picture may look unfinished.

How do you like this unusual option - a door that has been turned into a telephone booth with the help of photo wallpaper?

Before sticking photo wallpaper, the door must be cleaned of stains, and the surface must be leveled, sanded and degreased with a solvent. You can use regular wallpaper glue, but PVA is much more reliable. The disadvantages of this option for decorating a door include the fact that a bright image will immediately catch your eye, so it can quickly get boring. In addition, photo wallpaper on the door will lose its original attractiveness due to frequent touches. However, no one will stop you from changing the photo wallpaper on your door to something more original in a couple of months.

Photo wallpapers with picturesque landscapes are especially popular

Photo wallpaper on the door will help make a small room visually larger due to the increased panoramic perspective. And it’s very easy to stick them on; you don’t even need to remove the door from its hinges.

Idea nine. Regular wallpaper

Previously, this decorative option was particularly popular, but now many designers consider it bad manners. This does not prevent ordinary wallpaper, which has “migrated” to the door, from remaining a popular way of decorating the interior. They especially like to stick paper and vinyl wallpaper on doors in Sweden, the USA and Canada. By the way, there is no need to hide the entire door behind the wallpaper - on the contrary, wallpaper divided into clear “compartments” thanks to moldings looks especially interesting. The remaining surfaces of the door can simply be painted, choosing a shade that matches the color of the wallpaper. As an option, you can buy cork wallpaper and coat it with varnish on top for reliability. Their unusual texture will make the door more original.

Preparing the door is exactly the same as when using photo wallpaper. The main advantage is low cost, since you can use wallpaper left over from a previous renovation, and ease of decoration. The main disadvantage is rapid wear and tear - the wallpaper can peel off and tear at the joints.

Wallpaper glued not to the entire door, but to parts highlighted by moldings, looks more impressive

A door covered with the same wallpaper as the walls will literally blend into the interior. The reverse side of the door, of course, is covered with other wallpaper so as not to stand out against the background of the wall of another room.

Idea tenth. Fabric instead of wallpaper

This option will look especially cute and homey. A door decorated with fabric looks original; the choice of fabrics today is surprisingly wide, but this method also has its drawbacks.

If you choose a single piece of fabric to decorate a door, you should take care of the original design

First, when choosing a fabric, you should make sure that the glue will not leave stains on it. Secondly, the edges of the fabric should be pre-treated, otherwise the protruding threads will not look very aesthetically pleasing. Thirdly, doors decorated with fabric will not suit every interior design style. Those who are interested in patchwork, that is, creating canvases from different pieces of fabric, can turn their door into a real applique of bright scraps. By the way, if there is space on the door for a glass insert, you can hang a small curtain here, securing it with fishing line and small nails.

A very cute door, decorated using patchwork technology. The trouble is that such bright patches have nothing to do with the classic interior style; this is an option, rather, for “rustic” and colorful country

Idea eleven. Posters, cards, paper

An option for creative people and a great idea for a teenager's room. The door can be decorated with a poster and an image of your favorite artist or group, sheets from an old geographical atlas, or sheet music. Pasting such paper sheets and posters is as easy as regular wallpaper.

An old geographical map would be appropriate even on the interior door of an ordinary living room, but it is better to “place” posters in a teenager’s room

Idea twelfth. All kinds of stickers

This simple and not too expensive way of decorating a door is becoming more and more popular today. Vinyl stickers can be purchased in online stores, the cost of a model the size of a standard door starts from 2.5 thousand rubles, they are very easy to apply and will last longer than ordinary photo wallpapers.

Stickers with such funny and at the same time useful inscriptions will not only decorate the doors, but also cheer up the guests

If you don’t want to hide the entire door behind stickers, you can purchase small images - a butterfly, a bright flower, and so on. They cost less, and will completely transform the appearance of the door. “Informative” stickers are also popular, for example, on the door of an office, bathroom or toilet, which will tell guests what is hidden behind this door.

The elegant lady on this sticker will immediately inform guests of the house that the bathroom is hidden behind this door

Often, stickers can look like ordinary photo wallpaper, and sometimes they can look like hand-painting on a white door or a child’s drawing

Idea thirteen. Decoupage

The technology of meticulously cutting out the images you like from paper and then making appliqués from these pieces allows you to transform not only a box or photo album cover, but also an ordinary door. Everything a novice master of the ancient art of decoupage will need: paper drawings, napkins with a pattern you like, postcards and the like - everything from which you can cut out a design, a brush, PVA glue, scissors, glitter, acrylic varnish, outline and acrylic paint.

In the decoupage process, you can use literally anything - from scraps of old newspapers to greeting cards

In a brief description, the process looks like this: apply a layer of white acrylic paint to the surface of the door, wait until it dries, then another layer - and again wait until it dries completely. Then we apply a layer of paint of the selected shade, and then use PVA glue to attach the cut out paper drawings. At the same time, we try to glue the piece as smoothly as possible, without folds, and to expel all air bubbles. Using glitter and contour we can add dots, stripes and other small details. Then we cover the finished picture with a layer of varnish. That's all. The rest is your imagination and beautifully selected drawings.

The decoupage technique allows you to create amazingly beautiful paintings, and the varnish coating will extend the life of the decor

Idea fourteen. Mosaic

A door decorated with bright mosaics will be an excellent option for a bathroom; you can decorate a metal entrance door in this way. Moreover, it is not at all necessary to use pieces of ceramics for these purposes - in this case, the door may turn out to be too heavy. Mosaics can be created from pieces of wood or veneer, or you can purchase a ready-made one made from glass.

In this case, a bright glass mosaic occupies most of the door, making it very unusual and cheerful.

The mosaic is attached with special glue (Moment or liquid nails are suitable) onto a prepared and cleaned surface. It is worth thinking through all the details of the pattern in advance by drawing a diagram of the arrangement of the pieces with a pencil. By the way, you can decorate not only the door itself, but also the frame with mosaics, highlighting the slopes using the selected pattern.

Creating a mosaic pattern is a huge scope for creativity. And if any part does fall, you can always attach it back

An old door can become a real art object; all you need is a little imagination and effort. To begin with, you can use one of the simplest ideas, and then, once you get the hang of it, try yourself in the art of decoupage or painting. In any case, your door will definitely be one of a kind!

Over time, even the best quality doors deteriorate. The material dries out or becomes deformed, the coatings wear off and fade. In this case, it is necessary to either give the old doors the new kind, restore them. And what happens even more often is that the look of the doors may simply become boring or not suit your taste. In such a situation, replacing with new ones is not at all advisable. It’s better to update the doors yourself and think about creating a new design for it.

Stage 1: removing the old coating and processing the door

If there are deep scratches or cracks on the surface of the door, or the door is slightly askew, then it is best to remove it and put it in complete order. And before any subsequent finishing, it is worth getting rid of the old coating. For such work, it is advisable to have at least basic knowledge of working with wood and a set of tools.

• To renew a wooden door, remove it from its hinges. Remove all fittings (handles, locks, latches, etc.); if they are no longer suitable, it is better to replace them. At the same time, it is advisable to change all the handles and trim on the doors within the room so that they are all in the same style.
• If there is glass in the door, carefully remove the glazing beads and expose it. After this, you can begin to remove the old coating. By using construction hair dryer heat a layer of old paint and when it starts to soften and bubble, remove it with a putty knife.
• When the last paint has been removed, begin to fill the cracks and smooth out scratches on the surface of the wood. This can be done using special putties for wood and putty. After the materials have dried, sand the surface and sand thoroughly.
• Cover the surface of the door with stain or drying oil. This will give the surface the necessary shade or simply protect it from moisture.
• If there were glasses, then insert them back. It is best to use new glazing beads, they cost a penny, and it is better than cleaning the old ones.

In this form, the door is ready for further decoration and finishing.

Stage 2: selection and application of decor

But how can you update old doors? To do this, you should choose one of the listed design options. Before any work, it is necessary to return the door to normal condition. This is either the restoration described above with the removal of old coatings, or simply thorough cleaning and drying so that the new decorative elements are properly attached to the surface of the door.

Painting

The simplest and most reliable way is painting. If your door is made of solid wood or has wood veneer, you can open it with varnish or paint color of your choice. In any case, it is best to paint the door using a brush or spray. Use the brush all the time along the fibers, then the paint or varnish will fit normally into all the recesses and irregularities.

Decoration with a pattern. Moldings

In addition to painting in a single color, you can use paints of other shades or colors to create some kind of image or simple design on the door. Alternatively, you can paint the door one color, and the protruding parts (moldings) in another, contrasting with the base. If the door is smooth without relief or moldings, then you can either emulate them with a pattern, or use polyurethane or wooden carved slats. The latter are pre-painted in the required color and glued to the surface of the door.

You can try to paint a drawing or painting on the door. About this using the example of wall decoration.

Pasting with wallpaper, paper or fabric

You can decorate interior doors with your own hands and more in interesting ways. Nowadays it won’t be a problem to find photo wallpapers specifically for doors in stores or order online. They are already preparing taking into account standard sizes door leaf.

In addition to photo wallpaper, which, by the way, is not cheap, you can use other materials to decorate doors. If the room is decorated in some way a certain style, then the door can be designed to match it. For example, if this is a children's room, then you can use pages from various educational children's publications or various coloring books. For the kitchen or dining room, you can select pages with images of delicious and favorite dishes and stick them on the door.

If the material chosen is paper, then first hold it in cold water, and then carefully apply PVA glue to the entire surface of each sheet and attach it to the door. Carefully smooth the entire surface of the sheets so that no air bubbles remain underneath. In the future, it will be almost impossible to get rid of them. When the glue and material are dry, cover the entire surface with clear varnish to protect your creativity from fading and moisture.

In a similar way, you can use various fabrics as decoration materials. The abundance and variety of fabric designs will allow you to bring a variety of design ideas to life.

This is interesting: doors decorated with paper for the New Year

Stained glass and sandblasting decoration

If your door has glass inserts or the entire door is glass, then stained glass design would be an excellent option. Buying water-based stained glass paints is not a problem now. Draw a sketch of the image you would like to display on the glass and divide it into sections for each individual glass or for easier transfer to a larger glass. Outline the entire image with dark or even black paint with a thin line. After the outlines have dried, start filling in required spaces paints of other colors.

Alternatively, you can apply the image to the glass using sandblasting technology. To do this, it is better to contact a special workshop where such work will be performed.

Use of vinyl stickers

A huge number of different vinyl stickers will allow you to modify the doors in the easiest way. To do this, you don’t even have to get rid of the old covering or bother with disassembling and removing the door. With the help of vinyl stickers, you can hide minor scratches and abrasions on the door leaf from view. Again, they can be painted in different colors later.

To apply vinyl stickers, carefully separate the backing base from it and apply it to a previously cleaned surface on the door. After you press evenly over the entire area of ​​the sticker and check that everything is securely attached, you can remove the film that protects the outer part of the sticker. If the film does not separate well in some places, then heat it up using a regular hairdryer turned on to heat the air.

Original design methods

Absolutely exclusive option how to update the old one interior door, this is the use of various bulk materials to cover the entire surface. Oddly enough, it’s perfect for this buckwheat or rice In the case of buckwheat, the end result is a very unique and beautiful result. To stick the cereal, you can use PVA glue or regular wallpaper glue. After the surface has completely dried, it is better to varnish it several times to protect it from moisture. And you don’t have to worry about the integrity and durability of such a coating. Dry cereal is not subject to rotting or deterioration, and the varnish coating will protect it from moisture and prevent it from swelling.

With a little effort and imagination, you can transform an old interior door into something stunning and more attractive, or at least change its boring appearance.

(No ratings yet)

Discussion:

I can't decide to update kitchen set. it is long, in glass cabinets that are framed by golden stripes with curves at the corners. Everything was already boring, especially since the veneer began to come off. I would like to tint the glass from the inside with a transparent film with patterns. I have my eye on some of your options, there is an impetus for the idea. Thank you!!!

Last year I restored the bathroom door. I had a hard time with a hair dryer, especially since I didn’t remove the door. And now it turns out there are all kinds of gels to remove the old coating. How much would this simplify the work? And now I’m hooked on photo wallpapers; when you look at the choice there, my eyes widen. I will definitely do my next feat with doors using photo wallpaper.

We sell paint that creates the effect of craquelure. You need two cans to work. The first balloon creates a base that is mostly white.
The second can after application creates the illusion of a cracked surface. Gold or silver colors. Great option for doors.

I made a door in the vintage style for myself in the bathroom. For this, I bought special plastic pebbles for the aquarium, shells and plants. I glued it all with a glue gun. Since I glued everything chaotically, there was a lot of free space left. And something was missing. Plus to everything , ordinary glass looked kind of sad on such a door. Then I cut the tiles that were left over from the installation and also put them into use. I also added old scattered beads. Everything that was in the house in a marine theme went into use. I painted the glass with ordinary glass paint in blue-blue tones. And everything turned out very beautiful and not pretentious. It goes very well with the bathroom, because there are pieces of tiles like the bathtub itself. Fantasize. In general, everything is real and not expensive.

In my bedroom I covered my door with wallpaper on both sides, it turned out very cool. But now I read the article and realized that there were so many other good options. Even if I had just pasted it with photo wallpaper, it would have been much better. But I’m generally silent about vinyl. Now I googled and looked at pictures of the vinyl and fell in love, I definitely need to try to update it with something new.

For the patina effect, I used water-based acrylic pastes “Aqua-color” to imitate a metal surface. True, I used them not to decorate the door, but to cover the cabinet handles. It’s just that there are small jars included in the kit; there may not be enough for the door. But there are probably other patination compounds freely available... Ask around, look)

Of the methods described above, I used painting moldings and panels in contrasting shades and wallpapering. it turned out very well, because... Each door matches the style of its room. I don’t think anyone would dare decorate the doors in a room with buckwheat. But this is everyone’s personal matter. But one of my doors has not yet been restored - I really want to make it “antique” with patina. A detailed technology I can't find it anywhere. maybe someone can share a secret?

By clicking the “Add comment” button, I agree with the site.

To equip doorways For bathrooms, products made from solid wood, chipboard or plastic are used. Operating these products in conditions of high humidity has a detrimental effect on the appearance of the fabric. It is not easy to dismantle the old structure and install a new one, given the current cost quality door. Therefore, many people have a question about how to finish inner door in the bathroom.

Preparing the door leaf for restoration

Before proceeding with the restoration of the product, it is recommended that you familiarize yourself with the stages of this work.

There are many ways to renew the surface of a door leaf, but regardless of the choice, first of all you will need to prepare a list of tools:

• Construction hair dryer;
• Plane;
• Putty knife;
• Sanding machine;
• Sandpaper.

The first stage of work consists of processing and cleaning the canvas from the old coating.

Important! Removal of the old coating will be required regardless of what type of finishing is planned in the future.

Restoration work begins with removing the door from its hinges.

Removing the fabric from the hinges

The removed sash is laid on a previously prepared surface. The place for restoration of the product is chosen so that it is well lit and ventilated.

All elements are removed from the door so that a bare sheet remains. If there are glass inserts, they must also be carefully removed. After cleaning the canvas from excess elements, they begin to remove the old coating.

You can remove old paint using a variety of methods:

• If the canvas has a thin layer of paint, it is advisable to use a special remover, which is a chemical agent that contains acid. This method is considered the most gentle. Apply the remover using a brush to the door covering and wait a certain time specified in the instructions for use. Soon the old coating will swell, after which it is removed with a spatula.

Important! When using chemical agent To clean the surface of the canvas, protect your hands and eyes from contact with the product.

• When many layers of paint have already been applied to the canvas, you will have to put in a lot of effort. In such cases, a special hair dryer is used. Under the influence of hot air, the coating will swell, after which it is also removed with a spatula. This method is quite effective, but sometimes due to careless work you can damage the surface of the door.

• If you don’t have a hair dryer, you can use another method. Place a damp, stiff cotton cloth on the door leaf and press down with a heated iron. After two minutes, remove the rag and iron, and clean off the paint with a spatula. This procedure is quite labor-intensive, and with its help it is difficult to remove paint from uneven areas on the canvas. At the same time, the fabric and the surface of the iron quickly become dirty, which will also have to be cleaned.

Updating the door leaf

The particles of the old coating remaining after cleaning are removed using sandpaper. First you need to go over the door leaf with coarse sandpaper, gradually moving to the “zero” sandpaper.

Important! Grinding work is carried out along the fibers to avoid the formation of transverse lines.

After sanding, the blade is inspected for various defects. Small cracks can be repaired using putty. Large depressions are more difficult to eliminate. In most cases, to eliminate large defects in the canvas, you will have to cut out the damaged fragment and prepare an overlay from wood. It is adjusted in size and attached to the canvas using glue. To eliminate minor gaps resulting from gluing, putty is also used.

With a varnished door, all manipulations with removing the old top layer are identical. Only one point differs - the choice of putty must be approached with special responsibility. Since the varnish is transparent, any imperfections will be visible underneath. The color of the canvas can be changed using varnish or stain.

Important! Internal laminated or veneered structures cannot be painted. Completely different methods are used for their restoration.

Designs of this kind can be updated using a special wax pencil.

The pencil is first heated, after which all scratches and cracks are treated. The main thing is to choose the right pencil tone to match the color of the door. If the material is chosen correctly, then all processed errors will become almost invisible.

Decor selection

The second stage is to directly select the type of decoration that will be used further.

Coloring

The easiest method of updating an old door is painting. But, taking into account the features of the bathroom, you need to choose the right paint. It must be resistant to excessive humidity, temperature changes and not be afraid of frequent cleaning.

What paint is suitable for a bathroom door?

The range of paints is small; these are alkyd or acrylic compositions.

Advantages of alkyd paint:

• Ideal for painting MDF and chipboard;
• Available;
• Protects well from dampness;
• Not afraid of frequent washing;
• Has a wide color palette.

Disadvantages of alkyd paint:

• Professionals do not recommend using paint on structures made of natural wood.

Important! Wood has the ability to “breathe”, and alkyd compounds are vapor-tight.

This kind of coating delaminates quite quickly, resulting in cracks appearing on the surface.

• The smell of paint does not disappear for a long time.

Advantages of acrylic paint:

• Superior alkyd paints by service life;
• Not afraid of temperature changes and humidity;
• Easy to clean;
• No strong smell. There are compositions that are completely odorless.

Flaws:

• Despite the speed of paint drying, it remains susceptible to the slightest damage for a month.

Which paint should you prefer: glossy or matte?

There is still ongoing debate among professionals regarding the choice of paint type. for a long time. According to their decorative properties, paints are divided into the following types:

• Matte;
• Glossy;
• Satin;
• Semi-gloss;
• Semi-matte.

The matte surface is the most unstable. This type of paint is completely unsuitable for covering door panels located in bathrooms due to high humidity. Gloss paint also not entirely suitable for the bathroom, since it has excessive shine.

Important! If the shine of the canvas does not bother you, then it is quite possible to use this type of paint for the bathroom. Because from a practical point of view, gloss becomes the best option. The smooth surface does not absorb dirt and is less prone to stains.

Semi-gloss and satin paints are an average and universal option.

After determining the type of paint, you can proceed to directly painting the door leaf. The key rule is to choose the right color, since the painted door should be combined with the bathroom finishing elements. Apply paint with any in a convenient way in 2-3 layers.

Another option for door restoration is a combination of several colors. First, the canvas is covered with one color. After drying, it is sanded and a second shade is applied. You can create the desired texture using graters. After the canvas has dried, it is coated with varnish. A door finished in this way will take on a new life.

How to restore chipboard doors

This kind of material is not resistant to high humidity, so it is recommended to approach the restoration procedure responsibly. You should not use a hair dryer for this type of material. sandpaper for grinding, as this can lead to surface deformation.

To remove the top layer of paint, you will have to resort to the “old-fashioned” method (iron and cloth) or use a remover. Use a spatula to very carefully remove the paint layer to avoid damaging the canvas.

Grinding is carried out only with a “zero”. After gentle manipulations, paint can be applied.

Important! The best option updating the chipboard structure - veneering.

Choosing the right paint is important, but last step in the restoration of the structure. Equally important is careful painting, which is quite difficult to do without certain skills.

In contact with

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your...

New articles

New comments

Grade

Grade

Grade

Grade

After renovating a room, the owners may be faced with the fact that the old interior door does not match the new interior, although its functionality may still last for some time. In this case, you should think about how to update the interior door with your own hands. There are several decorative techniques that differ in complexity of execution and cost of materials. All you have to do is choose the most suitable one.

Preparatory work

Before decorating interior doors, they are prepared. The following tools are used for this:

• construction adhesive;
• tracing paper;
• press.

The door needs to be removed. Then examine the canvas for defects. If the old box has scratches, they need to be repaired with wood putty. You can decorate the canvas with photo wallpaper. If in some places the doors are peeling, then apply glue mixture, tracing paper is applied and pressed. An adhesive mixture is also used to seal cracks and microcracks. If the defects are large, chips with a fine dispersion are added to the adhesive composition.

Door Upgrade Methods

TO simple ways canvas updates include:

• applying varnish;
• coloring;
• use of stain and veneer;
• stained glass

Painting, varnishing and staining

Old wooden doors can be updated by painting, varnishing and staining.

Water-based, synthetic and organic dyes are used. After this, the door takes on a neat appearance.

The door leaf is possible. Wood varnish is well absorbed into the wood, evenly covering the entire surface of the structure. The main advantage of the protective and decorative composition is the presence of a tint base.
To apply the varnish, use a sprayer or brushes. Experts advise decorating the wood with a brush, which easily follows the structure of the structure, well saturating hard-to-reach areas. To increase the protective properties, it is recommended to paint the door in 2 layers.

If you have to refresh the box again, stain is used. Then the coating is treated with varnish. Stain can be used to update the color scheme of the canvas. It prevents the mixing of tones, and subsequent varnishing enhances the brightness of the color. Sanding gives it a matte finish.

If there is no need to create a matte surface, polishing and drying are carried out after grinding. This technology gives the door a crystal shine.

Veneering

Veneer is used to decorate the door. This technique for decorating wooden canvases is used if they are made from cheap sawdust. Due to veneering, the door acquires an aesthetic appearance. Veneer must be glued transversely relative to wood fiber .

Self-adhesive film

You can decorate the box with self-adhesive vinyl that imitates wood. Using this technique, coating defects can be easily hidden. Before gluing a wooden door, you will need to prepare a hairdryer, fabric, and scissors.

At the first stage, the coating is cleaned of various defects. This stage is considered the most difficult. Next, marking is done using a tape measure. These canvases are transferred to millimeter markings made by the manufacturer on the back side of the film. A knife is used to cut the product.

The cut pieces of self-adhesive are applied to the desired area doors. On the reverse side of the film there is a protective layer, under which there is glue. A few centimeters of the layer are carefully peeled off to stick the product on the door.

The lining, completely applied to the door, is smoothed with a rubber spatula or soft material. Self-adhesive is wrapped on all ends of the covering. Immediately cut the corners of the PVC product and install a lock with a handle.

Photo wallpaper

With the help of modern photo printing, an image of the desired size is transferred to paper. Photo wallpaper on wooden doors look beautiful. Any image can be printed. To do this, you can use the services of an advertising agency or printing house. The image can be selected at home or with the help of specialists.

On plain wallpaper You can stick polyurethane or foam moldings. In this case, the style in which the doors were decorated will change. The resulting design is suitable for a room decorated in a classic style. If you use a colored background or moldings with curves, then the doors will be decorated in Provence style.

Before applying the design, the surface is leveled and treated with glue. If paint comes off the door, remove it. Wallpaper is also treated with glue.

A rubber roller is used to level the canvas. If any bubbles remain, remove them with a plastic spatula. Then the remaining air is removed from the center of the structure to the edges. Using this spatula, smooth the wallpaper joints (if any). If the technology is performed correctly, then the joints are not visible.

The edges of the wallpaper need to be trimmed with a knife. This is done until the wallpaper softens from the glue. Otherwise, they will tear and stretch easily. It must be left to dry for several hours. The process of decorating fiberboard or solid wood continues after 12-24 hours. It depends on the temperature regime and humidity levels.

A simple pencil is used to apply markings. After the drawing has been applied, you will need to measure the length with a tape measure constituent elements molding. Then they are cut off and the edges are filed at an angle of 45 degrees. Using PVA glue, apply the back surface of the pieces. They need to be glued according to the marked markings. When the canvas has dried, it can be installed back. Using this principle, you can update the doors of a bedroom, nursery, or kitchen at home.

Drawings and paintings

The advantages of this decor include:

• beautiful and original appearance;
• simple execution;
• the ability to use ready-made stencils;
• wide choice of materials;
• embodiment of different ideas.

The disadvantage of this method is that its application requires artistic skill..
At the first stage, the coating is degreased with alcohol and treated with a primer. The last composition is applied twice. Acrylic paint is used in the same way. Each subsequent layer of paint is applied after the first layer has dried.

When zoning, the shape of the paneled part of the covering and the geometry of the ornament are taken into account. To give the surface a vintage look, the contours of the zones are covered with a different color. The paint can be applied with a sponge. The stripes that protrude on the door can be painted golden. Then the ornament is transferred to the surface and painted in suitable colors.

Decorating using decoupage technique

Decoupage does not require dismantling door design. You just need to wash and dry the coating. The opening is preliminarily covered with mounting tape. The tree is primed well and efficiently. The surface is rubbed with a simple paraffin candle and then painted. Next stage– gluing a decoupage card. It is pre-soaked in water for 12 minutes. The remaining drops of water are wiped off with a rag. The back of the strips and the surface of the door are treated with PVA glue.

Each piece is glued tightly. In this case, you need to make sure that folds and bubbles do not appear. If such defects are not eliminated immediately after they appear, the coating will turn out uneven.. If the coating has dried, putty is applied to the edges of the component elements. Excess composition will need to be removed with a wet rag or sandpaper. A varnished box will require longer preparation for painting. The varnish is first removed and defects are eliminated.

If necessary, the edges of the canvas are processed and abrasions are left. This technology will give the coating vintage style. If complied with step-by-step instruction, then ready decorated doors will look original with details different shapes. They can be cut from napkins. The color of the future canvas is selected taking into account the shade of the interior of the entire room. The material is glued using the method described above. The finished coating is varnished with an acrylic base.

Antique decoration

An antique wooden door can be seen not only in apartments, but also in houses and offices. At the same time, decor that imitates antiques is rare. It gives the door leaf individuality. Craquelure means two layers of varnish applied to the door. Special attention is given to the process of selecting varnish - each layer should have a different composition and different drying time. The coating is first cleaned, degreased and dried.

To age a door, you will need some materials:

• special varnish for craquelure;
• bitumen varnish, which gives an antique effect;
• acrylic paint.

Craquelure varnish is applied to the prepared coating. If the 1st layer is dry, apply the 2nd layer - bitumen varnish. It is necessary to enhance contrast when using a white background. If a dark tone is applied, acrylic paint is used. This technology is considered the best. If necessary, craquelure varnish is replaced with simple PVA glue, vinegar, egg white or gelatin. This method of updating doors is suitable for people who like an antique style.

Decor with stencils

If you have mastery in processing wooden products You can use a more complex canvas update. To apply decor with a stencil you will need:

• leather;
• glass or mirror tiles;
• stained glass;
• mat;
• bamboo curtains;
• bars;
• veneer.

Carrying out such decoration requires perseverance and good imagination. In the end it will be possible to do original door, which will fit perfectly into any interior.

The door, the panel of which is replaced by a stained glass window, gives the room unusual look. To implement this idea, water paint is used. The desired pattern is first sketched onto the surface. Paint is used to transfer the design onto the glass coating. This procedure is performed in a certain sequence:

• preparing a sketch of a drawing on paper;
• glass processing by cleaning and degreasing;
• substituting the design on the glass and then tracing it from the back with a thin brush;
• marking the contours of the drawing different colors paints

After completing the process, the paints must dry within 22 hours. Then the glass fragment is mounted in the door and fixed well.

Updating the opening and slopes

In addition to the door itself, the doorway is also updated. If this is not done, then the canvas will have an unfinished appearance. To successfully complete the work described above, it is recommended to think through the finishing step by step.

At the first stage, the support guides are processed. Then they are repainted in the same color as the door leaf. In case of severe wear, it is mounted on the guides plasterboard sheathing. If there are roughnesses, perforated corners are used for cladding. Then the opening is repainted.

In the future you will need to correctly. For their installation, special clamps are used that hold the platbands well. If there are no fasteners, glue or self-tapping screws are used.

If the door is updated only with the opening, and the slopes remain the same, then the decorating process is considered incomplete. Used for finishing slopes different methods. More often, special MDF strips are used to update slopes. You can also install plasterboard slopes, which are fixed with perforated corners or glue.

Another technique for finishing a slope is plastering. This process is the most labor-intensive and requires experience and qualifications in this matter. Experts believe that optimal solution is plastering followed by installation of perlite slopes, which are not cheap. But in the end you can get strong and durable slopes. Mold does not appear on them.