Highscreen boost update to 5.0 official. Check for Root rights

Instructions for flashing the Highscreen Boost 2 smartphone with new official or custom firmware, installing custom recovery and getting root superuser rights.

Before you start flashing your phone's firmware, you need to install drivers to connect your PC with the Highscreen Boost 2 phone. To do this, download the archive - ADB, unpack it and install it.

Connect the turned on phone to the computer. USB debugging should be enabled by default in your phone settings; if you disabled it, enable it. Right-click on the “My Computer/This Computer” icon and select “Properties” from the context menu. In the window that opens, look for “Device Manager” on the left and open it.

In the “Device Manager” window we see the connected device, for me it is “YunOS ACB phone”, click on it 2 times to open the list, we see “YunOS ACB Interface”. You have the driver installed.
If there is a yellow triangle next to your device, it means you do not have drivers installed.

In the folder where the drivers are located (by default C:/adb/) with the Shift button held down, right-click on an empty space. In the context menu, select “Open command window”. The command line opens, write adb devices
List of devices attached
………………………. device
There should be symbols instead of dots.

Installing custom recovery on Highscreen Boost 2

Download any recovery that is suitable for the Highscreen Boost 2 smartphone

What you need is a file in the .img format, for example recovery.img. Place the downloaded file in the folder C:/adb/
Turn off the phone. We take out the battery for 10-15 seconds (not necessary, but sometimes it is necessary), and insert it back. Press the volume down and power on keys and hold for 5 seconds. will appear eternal Highscreen inscription (fastboot mode). We connect the phone via a wire to the computer.

In the C:/adb/ folder, with the Shift button held down, right-click on an empty space. In the context menu, select “Open command window” and in the window that opens, write fastboot devices and see the following:

Then we write fastboot flash recovery recovery.img and press enter, then we write fastboot boot recovery.img and press enter, after which the process of flashing custom recovery on the smartphone should start.

Ready! The phone will boot into recovery on its own!

Installing custom firmware using recovery

The installation of the firmware will take place through the custom recovery TeamWin Recovery Project, and it is assumed that you installed this recovery from the previous paragraph of these instructions.

First, download the firmware you like and put it on the flash drive in your phone

Download Highscreen Boost 2 firmware – MIUI 4.8.8 RUS | cm-11 | Baidu_V6

We go into recovery, with the phone turned off, press the volume up key and the phone power button.

Do Backup (Required!), press the “Backup” button, move the bottom slider to the right and wait. We wait for a long time... until the green inscription appears successful. While the recovery is running, the screen may go dark; the phone is locked.
Then we clean your smartphone from unnecessary system files, that is, we do a wipe. Let's go to main screen recovery and press the “wipe” button, move the slider again and wait a long time again.
Install the firmware. Go to the main recovery menu and click the Install button. Find the downloaded firmware and click on it. Again we move the slider and jam again) At the end of the process the message sucsesful and 2 buttons restart system and wipe dalvik will appear.

Highscreen Boost 2 SE is a Russian smartphone that runs on Android 4.3 and has a rating of 5 out of 5 for performance. We will tell you all the characteristics of the smartphone, as well as how to get root on the highscreen and reset the settings. In addition, there is firmware (official and custom).

Root Highscreen Boost 2 SE

How to get root for Highscreen Boost 2 SE see instructions below.

Below are universal programs for obtaining root rights for devices on Qualcomm Snapdragon

• (need PC)
• (Root using PC)
• (popular)
• (root in one click)

If you could not obtain superuser (root) rights or the program did not appear (you can install it yourself) - ask a question in the topic. You may need to flash a custom kernel.

Characteristics

1. Standard: GSM 900/1800/1900, 3G
2. Type: smartphone
3. Operating system: Android 4.3
4. Case type: classic
5. Case material: plastic
6. SIM card type: micro SIM
7. Number of SIM cards: 2
8. Multi-SIM operating mode: alternating
9. Weight: 203 g
10. Dimensions (WxHxD): 68.6x140x9.8 mm
11. Screen type: color IPS, touch
12. Touch screen type: multi-touch, capacitive
13. Diagonal: 5 inch.
14. Image size: 720x1280
15. Pixels per inch (PPI): 294
16. Automatic screen rotation: yes
17. Type of ringtones: polyphonic, MP3 ringtones
18. Vibration alert: yes
19. Camera: 13 million pixels, built-in flash
20. Camera functions: autofocus
21. Video recording: yes
22. Front camera: yes, 2 million pixels.
23. Audio: MP3, AAC, WAV, FM radio
24. Voice recorder: yes
25. Headphone Jack: 3.5mm
26. Interfaces: Wi-Fi 802.11n, Bluetooth 3.0, USB
27. Satellite navigation: GPS/GLONASS
28. Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA, email POP/SMTP, HTML
29. Modem: yes
30. Processor: Qualcomm Snapdragon 400 MSM8228, 1400 MHz
31. Number of processor cores: 4
32. Video processor: Adreno 305
33. Built-in memory: 8 GB
34. Volume random access memory: 2 GB
35. Memory card support: microSD (TransFlash), up to 32 GB
36. Additional SMS features: text entry with dictionary
37. MMS: yes
38. Battery type: Li-Ion
39. Battery capacity: 6000 mAh
40. Additional battery capacity: 3000 mAh
41. Sensors: light, proximity
42. Search by book: yes
43. Exchange between SIM card and internal memory: There is
44. Organizer: alarm clock, calculator, task planner
45. Features: 2 batteries: 3000 mAh and 6000 mAh; weight with 3000 mAh batteries - 151g, with 6000 mAh battery - 203g

Highscreen Boost 2 SE review

In fact, Highscreen Bost 2 SE is (now) the most worthy solution not only in terms of autonomy, but also in terms of design and performance. Of course, the price/quality ratio is also respected.
You can verify this by reading the materials we have prepared on this smartphone.

Firmware for Highscreen Boost 2 SE

Official firmware (latest, 20150320_V3.2IIse) - ()
Custom firmware CyanogenMod 13 (Android 6.0) -

Flashing HighScreen Boost 2 SE firmware can be done in several ways. If the firmware file has not yet been uploaded here, then create a topic on the forum, in the section, specialists will help you and add the firmware. Don’t forget to write a 4-10 line review about your smartphone in the subject line, this is important. The official Highscreen website, unfortunately, will not help solve this problem, but we will solve it for free. This HighScreen model has a Qualcomm Snapdragon 400 MSM8228, 1400 MHz on board; accordingly, there are the following flashing methods:

1. Recovery - flashing directly on the device
2. A special utility from the manufacturer, or

What custom firmware are there?

1. CM - CyanogenMod
2. LineageOS
3. Paranoid Android
4. OmniROM
5. Temasek's

Problems and shortcomings of a Highscreen smartphone and how to fix them?

• If Boost 2 SE does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
• If stuck during update / stuck when turned on (needs flashing, 100%)
• Doesn't charge (usually hardware problems)
• Does not see the SIM card (SIM card)
• The camera does not work (mostly hardware problems)
• The sensor does not work (depends on the situation)

Reset settings on Highscreen Boost 2 SE You can do it in a very simple way:

1. Settings->Backup and reset
2. Reset settings (at the very bottom)

How to reset a pattern key

How to reset the pattern key if you forgot it and now you can’t unlock your Highscreen smartphone. On the Boost 2 SE model, the key or PIN can be removed in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.

1. Reset graph. blocking -
2. Password reset -

Download firmware for Highscreen Boost 2 SE

Disadvantages and problems

Firmware Highscreen Boost 2 SE

Highscreen Boost 2 SE detailed specifications

Model Housing Performance

Lacks functionality on purchased Android smartphone Highscreen Boost 2 SE? Do you want to get root rights to this smartphone? The site and article getting Root Highscreen Boost 2 SE will help you!

What is Root?

For those who have just become a beginner or are not an expert in a huge Android world and not particularly familiar with the concept of how - Root Android , and also why it is needed, what can be done after receiving it Root is right or how to get rid of them later if they are no longer needed, all this can be learned from the detailed article -!

First of all!

There are no "left" links or unnecessary actions in this article! If you really need Root Rights, then read carefully and follow step by step, this is a guarantee that you will do everything right! This article on obtaining Root rights is divided into two parts: The first part is Required Components and conditions, the second part is Instructions How to get root rights using the received files and programs. If in the process of getting root Android rights constantly rebooting or in the process of eternal loading (happens extremely rarely, but still), then it’s worth . Now let's start getting Root rights!

Android manufacturers sometimes release new firmware on which you cannot get Root using one of the suggested methods. If the article contains alternative methods, try them. Doesn't work anyway? Specify Android version and the firmware version in the comments (don’t write angry, shitty comments, it won’t do you any good or any harm to others). Android is frozen (will not load), read and re-read from the very FIRST PARAGRAPH, all the necessary links are present in the article!

Still have questions?

Necessary to obtain Root rights

For Method No. 1

1. Computer or laptop (Windows XP/Vista/7/8/8.1);
2. Charged Highscreen Boost 2 SE smartphone at least 30%;
3. Enable USB debugging;
4. Download the archive with the program to obtain Root rights and unzip.

For Method No. 2

1. Computer or laptop (OS Windows XP/Vista/7/8/8.1);
2. Undamaged MicroUSB cable;
3. Download and install the driver;
4. Charge smartphone Highscreen Boost 2 SE should be not less than 30%;
5. Enable USB debugging on your smartphone;
6. Download the program to obtain Root rights - Vroot.

Instructions for obtaining Root Highscreen Boost 2 SE

Method No. 1

1. Connect the Highscreen Boost 2 SE smartphone to the computer in charging mode 2. Run the program to obtain Root via file rootboot.bat

3. In the program interface, click the button “ 1 " and to continue selecting " Enter«
4. Do not turn off your smartphone until it has completely rebooted and booted completely!

5. After turning on the Highscreen Boost 2 SE smartphone, download the root administrator application - SuperSU

6. Root Highscreen Boost 2 SE received!

Method No. 2

1. Connect smartphone Root Highscreen Boost 2 SE for PC

2. Run the program to obtain Root rights Vroot

3. Wait until the program detects your smartphone Root Highscreen Boost 2 SE

4. Press the green “Root” button

7. After a couple of minutes, Root rights were obtained

8. To provide the application root in the pop-up window, press the right button

Check for Root rights

For new official or custom firmware, installing custom recovery (recovery) and obtaining root superuser rights.

Before you start flashing your phone, you need to install drivers to connect your PC with your Highscreen Boost 2 phone. To do this, download the archive - ADB, unpack it and install it.

Connect the turned on phone to the computer. USB debugging should be enabled by default in your phone settings; if you disabled it, enable it. Right-click on the “My Computer/This Computer” icon and select “Properties” from the context menu. In the window that opens, look for “Device Manager” on the left and open it.

In the “Device Manager” window we see the connected device, for me it is “YunOS ACB phone”, click on it 2 times to open the list, we see “YunOS ACB Interface”. You have the driver installed.
If there is a yellow triangle next to your device, it means you do not have drivers installed.

In the folder where the drivers are located (by default C:/adb/) with the Shift button held down, right-click on an empty space. In the context menu, select “Open command window”. The command line opens, write adb devices
List of devices attached
………………………. device
There should be symbols instead of dots.

Installing custom recovery on Highscreen Boost 2

Download any recovery that is suitable for the Highscreen Boost 2 smartphone

What you need is a file in the .img format, for example recovery.img. Place the downloaded file in the folder C:/adb/
Turn off the phone. We take out the battery for 10-15 seconds (not necessary, but sometimes it is necessary), and insert it back. Press the volume down and power on keys and hold for 5 seconds. will appear eternal Highscreen inscription (fastboot mode). We connect the phone via a wire to the computer.

In the C:/adb/ folder, with the Shift button held down, right-click on an empty space. In the context menu, select “Open command window” and in the window that opens, write fastboot devices and see the following:

Then we write fastboot flash recovery recovery.img and press enter, then we write fastboot boot recovery.img and press enter, after which the process of flashing custom recovery on the smartphone should start.

Ready! The phone will boot into recovery on its own!

Installing custom firmware using recovery

The installation of the firmware will take place through the custom recovery TeamWin Recovery Project, and it is assumed that you installed this recovery from the previous paragraph of these instructions.

First, download the firmware you like and put it on the flash drive in your phone

We go into recovery, with the phone turned off, press the volume up key and the phone power button.

Do Backup (Required!), press the “Backup” button, move the bottom slider to the right and wait. We wait for a long time... until the green inscription appears successful. While the recovery is running, the screen may go dark; the phone is locked.
Then we clean your smartphone from unnecessary system files, that is, we do a wipe. We go to the main recovery screen and press the “wipe” button, again move the slider and again wait for a long time.
Install the firmware. Go to the main recovery menu and click the Install button. Find the downloaded firmware and click on it. Again we move the slider and jam again) At the end of the process the message sucsesful and 2 buttons restart system and wipe dalvik will appear.

Click restart and wait until the Highscreen Boost 2 phone reboots with new firmware and we rejoice.