What can be made from car wheels. What flower beds can be made from old tires: photos and videos

( ArticleToC: enabled=yes )

Around offices and residential buildings, on garden plots and children's playgrounds, crafts made from old tires that have served their useful life are increasingly appearing. The shape of this landscape decoration depends on the amount of material available.

Even just by placing tires on top of each other and pouring soil inside, you get a nice flower garden. If you are smart, you can create real masterpieces from tires.

A great place to turn extraordinary ideas into reality is a summer cottage best material- worn tires. From them, craftsmen build not only flower beds, but also other crafts from old tires: swimming pools, sandboxes, flower baskets, fairy-tale characters and swings for children, paths, etc.

Landscape design continues to gain popularity, so every owner of a country plot is looking for bold and exclusive ways that will help make it different from their neighbors.

The simplest but effective way is to create crafts from old tires. You don't need to be a professional to do this. It is enough to make a sketch and select materials.

When the size of the plot is small, it is more reasonable to place single forms on it: a stork, a carriage, a heron, a frog or a parrot.

If the lawn is large, then crafts made from old ones must also be large. car tires — vertical structures and multi-tiered flower beds.

Flower beds can be very different:

• oval or round;
• high or low;
• in the form of animals and flowers;
• multi-tiered.

In addition to paints and tires, various stones, technical marble, building materials, metal mesh, aquarium decorative rock. It is easier to carry out work with winter tires, which are thinner and softer.

Flower beds and flower beds made from tires

The easiest way is to make a flower bed from tires in the shape of a flower by first marking the shape of the petals with chalk. Then cut them out with a sharp knife. In the future, stable enamel, oil or nitro paint is used for decoration, which spread evenly on the source material and lasts a long time.

Will do aerosol can and car paint. To prevent plants from overheating, it is better to choose light-colored paint.

The white flower girl made from a tire looks elegant.

No less beautiful is a flower garden made of tires, for the decoration of which stone is used.

Monochromatic compositions and combinations of different colors are equally impressive.

Coloring

For low and small flowers, they are painted in bright colors. The shape of the flower beds can be chosen in a variety of ways. To give an aesthetic appearance, when painting tires, it is advisable to grab and inner surface above.

Multi-tiered flower beds

If there are enough tires on the farm, you can create a multi-tiered flower garden, for which you will have to cut out the middle of all the tires to get rings.

The structure is assembled from rings in the following sequence:

• install the largest tire in the center;
• line the bottom with crushed stone or sand;
• pour fertile soil;
• Place a tire of a smaller diameter with similar filling on top.

The dimensions of the exposition components determine the number of tiers. Flowers or strawberries are planted in the gaps formed between them.

Flowerbed-swan - flower garden made from tires with your own hands

The swan made from tires looks original, with flowers on the inside.

Stepping back 30-40 centimeters from the edge of the tread, make a pair of rounded cuts (on 2/3 of the surface) parallel to the circle on the opposite side. The narrow middle part will be the neck. It is cut off on one side to form a head at the end. Wings will be made from the side surface. But to do this, the tire will need to be turned out and modified with cuts of different lengths that imitate feathers. Having painted the figurine and allowed the paint to dry, they begin to plant flowers (preferably low-growing ones, such as forget-me-nots).

Mixborders and colorful borders made in the form of cups with flowering flowerbed arrangements will transform the area beyond recognition and at the same time make it cozy and unique.

Creative flower garden turtle

This cute figure is made from a tire and a tread cut into 4 pieces. The protector paws are inserted into the slots made on the sides of the tire. They are secured with wire staples, just like a tail cut from rubber.

A head made from crumpled newspapers can be attached to the neck (plastic bottle) using tape. You can put a “Panama hat” made of plastic or straw on it.

Then, the craft is painted according to real “turtle” laws, so that it is clear what they wanted to depict. The eyes and mouth are drawn, and plants are planted in the body.

Flowerbeds made of rubber tires

Do-it-yourself flowerpots made from old tires will become more than just a functional detail in the design of the site. They will give it exclusivity, complete the composition, and emphasize the splendor of blooming flowers. This material has many advantages: you don’t need to spend money on it, it is resistant to adverse environmental factors, so it does not lose its attractiveness for many seasons. The most suitable for creating flower beds are imported winter tires with a diameter of R12-R17 (and the more wear they have, the better), since they are softer.

Video: DIY flower beds. Flower garden made of tires.

DIY tire track: economical, beautiful, reliable

Tires make wonderful paths for suburban areas that are not afraid of the vagaries of nature: in winter this material does not crack, in rainy autumn it does not get wet, and in the summer heat it does not deform.

Arranging tire paths will not take much time, but the area will be noticeably transformed. There will be no material costs required for tracks that will last an incredibly long time. In addition, it does not require additional care and prevents the germination of weeds.

All that is needed to keep it looking well-groomed for a long time is washing it with a hose or watering can and sweeping away the debris. Even after heavy rains, the path does not slip, remaining almost dry, so you can walk along it completely freely.

Tire stations and service stations will help you get the right number of tires. Since truck tires are wider, it is better to choose them.

Preparing tires for the device

Those who like this idea can use tires or tiles made from them to create paths. Preparation begins with separating the tread, i.e. circumcision of the side part.

To do this, use a powerful and sharp knife, which is periodically dipped into a lubricant (soap, oil). To prevent jamming, a pry bar is inserted into the hole formed behind the knife.

After the sides are cut, there is a rubber band.

When its quantity corresponds to the area of ​​the future path, proceed to preparing the base for laying, consisting of 3 layers:

1. compressed soil;
2. crushed stone;
3. cement and sand, taken in a ratio of 3:1.

The area under the path is abundantly moistened and compacted.

On next stage align and attach the tapes to the boards or bars. The edges are secured with nails, and if there are several stripes in the path, then they are laid with a gap of 1-2 centimeters. This is done so that the grass that appears soon will additionally fix the products. It is recommended to make a recess at the place where the rubber and board are attached so that your feet do not cling to the edge. That's all - the exclusive path is ready!

Puzzles for paths

No less practical and easy to use is a path made from rubber puzzles, which allow you to change its inclination and direction. It looks more impressive than those made from rubber tires, but it requires financial expenses to purchase rubber tiles.

You can use boards, but they are uncomfortable to walk on. On paths made of linoleum it is easy to slip, but slate can easily crack. Therefore, the most the best option are tracks made from tires.

Tire steps

If the site has uneven terrain, it is rational to equip not a path of tires, but a staircase. For heavy loads, they are installed in two rows. In installation, this design is no more complicated than laying rubber. At the same time, the staircase on the site will be an original design element.

Tires are placed on the ground, starting from the bottom and gradually moving up. For better fixation, the wheels need to be dug into the ground and filled with soil.

The advantages of an unusual staircase include less stress on the joints during ascents and descents, and pleasant shock absorption.

Do-it-yourself sandboxes made from tires

All children enjoy playing in sandboxes. It’s very easy to make them if you have car tires that have reached the end of their service life.

Today you can often find in parks and playgrounds all kinds of bright sandboxes created by the hands of creative parents.

Tires are valuable because they are easy to attach with the simplest tools on hand:

• small and large sharpened knives;
• wire for staples;
• nails.

You also need to buy different colors of paint and find tires of different diameters.

Sandboxes can be made from one tire or several.

To make them you need:

• rubber hose;
• tire or several;
• a knife with a sharp, powerful blade;
• shovel;
• paints;
• sand.

For the baby's future play area, it is necessary to dig a hole, the diameter of which should not exceed the size of the tire. The tire is cut so that the upper part is free.

A rubber hose, previously cut in half, is placed on the cut-off part, which will protect children from injury. After painting the sandbox in bright colors and letting the paint dry well, add sand and “open” a wonderful place for the children to play. They will be protected from the bright sun by a beach umbrella fixed in the center.

Video: DIY tire sandbox

Sandbox “wavy”

Several children can play in it at once.

To create it you will have to stock up:

• several small tires of the same diameter;
• round frame;
• glue, screws, nails;
• with a knife;
• sand.

It is difficult to imagine a person who has not seen crafts made from car tires. Agree, many of them are made with talent and leave no one indifferent. Why not try to create something with your own hands from old tires? High-quality work will find its place on summer cottage, in the garden, in the yard.

Old tires are worthless, but you can make some pretty large, colorful, and useful crafts out of them that are weather-resistant. From car tires you can make flower beds, country furniture, toys for the playground, funny figurines of animals and birds, useful household items and even a children's car.

Simple crafts require little time and a minimum of tools. Here is a list of what is enough for most ideas.

In addition to the above, worn tires are used for the construction of foundations and houses. Fences are built from them. We follow the content.

The most important: crafts from tires for the playground

Have no doubt: everything that is done for children is the most important! In the simplest version, you need to pour sand inside a large wheel - and you get a sandbox. A painted wheel, and even with a pattern, will decorate the site. We install an umbrella in the sand and get an option for little VIPs. For them, we put insulation on the inner rim of the tire for water pipes so as not to get scratched.

Small tires will also work. They can be fastened together with self-tapping screws. The protruding part of the screw must be screwed into a piece of wood so that no one gets hurt.

A mini pool made from a large wheel is a well-known thing. A small master class on making a swimming pool:

1. The bead on one side of the tire is cut off. It is better to do the work with a jigsaw.
2. They dig a pit with a depth of 20 cm and an area slightly larger than the outer dimensions of the wheel.
3. Sand and crushed stone with a total thickness of at least 10 cm are placed in the pit.
4. Pour cement mortar in a ratio of 1:3.
5. The tire is placed on the thick solution and further filled with the solution so as to cover the inner rim of the wheel. A layer of mortar with a total thickness of 20 cm will not crack.
6. After the solution hardens, the internal and external surfaces are painted. Blue paint works best. It is better to prime the pre-painted surface.
7. After the paint has dried, the pool can be filled with water.

The swing is a sacred thing. No one will become Gagarin, but all family members will enjoy the swing. At the hardware store you will need to purchase a chain, hooks for hanging, carabiners for connecting the chain, screws, washers and nuts M6, M8 for forming the seat.

Screws need to be used optimal length, with a semi-concealed head or with a hemispherical head. It is better to use decorative cap nuts. Screws that are too long must be cut off.

If the above conditions are met, the product will be as safe as possible. In the photo below there are options in which only rope was required.

It's even easier to make a rocking chair on the ground. It is better not to cut the tire in half, but to leave protrusions for attaching to the board with self-tapping screws. Keep in mind that a soft wheel will sag, so the stiffness of the tire will limit the weight of those who can use the swing.

A board treated with sandpaper will protect your children’s sensitive areas from splinters. The painted product will impress the neighbors. It is better to place the handles across the board. They must have big sizes so that the child's hand does not get stuck under the handle when falling. If you don’t walk around the dacha at night, you can attach decorative eyes to the swing.

A rocking chair for one child can have a base of simpler shapes. Not everyone has an old bicycle handlebar and can be replaced with a shovel handle.

A car, a tractor and a tank are all made from old wheels

I think that one of these cars will be able to distract your child from the TV. For a car, in addition to worn wheels, you will need a steering wheel. Unneeded wheels, hubcaps and headlights are present in almost any garage and will be happily used for useful purposes.

In the simplest version, a regular board laid on a tire is suitable as a seat. A broken plastic chair will create a Schumacher car. The most important thing is not to skimp on paint and imagination when working with the model.

Nothing prevents you from building both a tractor and a tank from tires. Discuss the design idea with your child and include him in the creation process.

Furniture for adults and children at their summer cottage

Such furniture can definitely be left in the garden. Rain won't ruin it; it's easier for attackers to do their part than to carry heavy loads. If you drill holes and thread a weather-resistant cord through them, the result will be original and reliable. Several round pieces of wood can be cut from thick branches. Then they should be cleared of bark, the ends should be sanded and varnished. We twist everything with self-tapping screws and get a chair and a table.

The simplest thing is to lay the tires on top of each other and cover them with sheets of moisture-resistant material, such as OSB. Surfaces coated with moisture-resistant glossy varnish will be protected from moisture, will not get dirty, and can be easily wiped clean from dust. To prevent the tires from moving, they can be fastened with self-tapping screws.

Another step towards perfection is soft seats and backrests. It is convenient to cut the bases of such parts from plywood. Foam rubber 2-5cm thick is placed on them and covered furniture fabric. The fabric is wrapped and stapled to the plywood using a staple gun.

Comfortable armrests are made from motorcycle tires. In this case, the armrests and backrest are fastened with screws, washers and nuts M6, M8. As already mentioned, screws should be used of the optimal length, with a semi-countersunk head or with a hemispherical head. It is better to use decorative cap nuts. Screws that are too long must be cut off.

The bases and backs of the seats, as you can see in the photo, can be made from tread strips. The strips are intertwined and attached to the inside of the tire rim. In this case, you can do without screws if you screw self-tapping screws of the optimal length into the tire so that they do not protrude.

Useful on the farm

This homemade product won my heart so much that I did not regret five minutes of working with a jigsaw for it. The photo shows the technical process and the result.

It is difficult to remain indifferent when the possibility of using worn tires on the farm is obvious. Judge for yourself:

1. If you insert a plastic basin of a suitable diameter into a car tire, you will get a wonderful sink for your garden.
2. Several tires stacked on top of each other in a hole will serve as a long-lasting toilet container. It is recommended to first pour sand and crushed stone into the bottom of the hole.
3. Tire treads will perfectly cope with the role of paths in the garden. Tread strips cut from old tire, are fastened together using a board and self-tapping screws.

Funny, cheerful figures for everyone

Tire figures impress with their colorfulness, originality, and size. We have already told you how to make a palm tree from plastic bottles. You can also make a palm tree from old tires. You can place a giraffe next to a palm tree in the garden.

By burying an old wheel partially in the ground, you can make almost any animal. Adding various attributes to decorate your craft is welcome. The most important thing is not to limit your imagination in using paints.

By combining several tires of different sizes, cutting and bending the material in all directions, and using bold colors, you can create many smile-inducing crafts from old tires. You just have to take it and try it, since the source material can be spoiled as much as you like. It is convenient to apply the cutting pattern to the rubber with chalk or a marker.

Figures the size of a man can be easily made from worn wheels. They are good in the yard, behind the fence, and on the playground. To mount the wheels on top of each other, it is convenient to use a piece of reinforcement or metal pipe, driven into the ground. It is important that the rod passes through both tires to the entire height of the craft. It is convenient to cut flat circles from plywood, OSB, plastic and even linoleum. Any material can be fastened with self-tapping screws.

We wish you creative success in creating a new craft from old tires with your own hands! Let the video help you.

Almost any summer cottage allows you to bring a wide variety of ideas to life. Yes, it can be used as decorative elements comfortable paths made from old tires. There is no need to rush to throw away things that have become unnecessary; you can restore these items and bring something new and original.

Device example garden path from tires

DIY tracks made from old car tires will be a unique addition for anyone. Moreover, their use can be completely diverse. From car tires you can make an original frame for the following various garden elements:

• or flower beds;

It should be noted that most owners country houses people will be very willing to build garden paths from car tires, due to the fact that this method is not overly labor-intensive and costs virtually no large financial investments. By the way, to independently improve garden paths you will need to use not the entire surface of old tires, but only a certain part of it - treadmill, the so-called protector.

To make such a high-quality decorative element in your garden with your own hands, absolutely any old tires are suitable, but it is best to use those left over from trucks. Their use will significantly increase the width of the future convenient garden path, but at the same time you will need much less tires than if you used car tires from passenger vehicles.

Moreover, this will in no way affect the quality of the future path, but it will allow you to reduce the time spent on the external improvement of your site. There are several reasons why it is recommended to use rubber from old car tires:

Manufacturing process

It should be clarified that all the necessary material for such a track will not be difficult to obtain.
The easiest way to do this is step by step:

After you have built such a garden path with your own hands, it will be advisable to walk along it several times, which will allow you to better press the boards with ribbons into the top layer of soil. In order for the coating to lie well, the ground underneath must first be leveled.

For this purpose, you will need to carefully remove a small top layer of earth, and fill the resulting area with fine gravel or pour regular concrete. When the blank for such a path is completely ready, you can spread the rubber coating you made for the garden on it. When laying rubber bands from car tires, it is not at all necessary to lay them directly on the ground layer.

Using ordinary nails, they can be carefully nailed to wooden beam or boards, and only then carefully lay them out on the garden path.

Moreover, if you do not place the car tires close to each other, but leave a small gap of 1-2 cm wide between them, then new grass will soon grow through such cracks.

This will look very nice and will also prevent the rubber bands from car tires from moving to any side in the future. If you do not have your own truck, then the tires necessary for the garden path can be purchased absolutely free. For example, qualified technicians from all kinds of tire shops will most likely be only happy if you help them get rid of unnecessary material.

The use of decorative paths from tires

In addition to the above-mentioned areas for using such tapes from car tires, it would also be advisable to use them in the following places in a suburban area:

• Personal parking road transport on the territory of a personal plot;
• Path at the entrance or entrance to your yard;
• A place used for washing cars, bicycles or scooters;
• A utility yard with various buildings, the passages between which can be lined with similar high-quality decorative paths made from car tires.

Similar coverage on site country house, built with your own hands, will not only look very harmonious in natural design, but will also be distinguished by its special practicality during operation.

In addition, this coating itself is absolutely non-slippery, which makes the chosen solution more than rational, especially if your family has small children or elderly people. In the spring, when the snow melts or at any other stormy time of the year with heavy precipitation, certain problems often arise with access to the summer cottage. This problem can also be solved by using rubber bands.

It is necessary to spread them on the most problematic places and any car will pass over them completely unhindered.

It is also worth noting that it would not be superfluous to carry with you not a large number of similar tapes in the trunk of your car. They can always be useful to you in case of the most unforeseen circumstances, allowing you to get rid of unnecessary manipulations with a shovel and the need to place boards under the wheels if your car cannot drive off-road.


Such interaction of rubber with rubber will ensure almost caterpillar cross-country ability of vehicles. Another, less known, but rather eccentric use for old car tires is to use them as country buildings. Since this material can be given a semi-cylindrical shape, just like tiles, it can be laid in a completely similar way.

Naturally, for the main country cottage this option is not suitable, but, say, or this is more than profitable solution, because with the help of old car tires you can build with your own hands an almost eternal water-repellent roof that can withstand any bad weather.

If the decision to create such a decorative element from car tires on your summer cottage has already been made, then you can choose from two possible options:

• Use rubber bands from tires (the method for obtaining them is described above);
• Use rubber tiles, which are essentially recycled tires.

Both of these options are equivalent in their execution. Rubber belts from car tires and rubber tiles have absolutely the same characteristics and similar durability.

Just a few decades ago, flower beds made from tires could rarely be found on personal plots. Disposing of wheel tires like this in an unusual way It was carried out only in villages remote from large cities and was of an exclusively practical nature. It was not customary to decorate or modify a flowerbed made from a wheel main material, which served as a fence for the flower garden.

Today everything has changed. The fashion for interesting man-made details in decor has affected not only the interiors of apartments, but also personal plots. Flight of fancy modern masters household design is huge. This allows you to create unique compositions that are not only useful in the garden, but also give it a unique style. Such original details can be found in almost every dacha. These include flower beds made from tires, which are quite easy to make with your own hands.

Almost every second person in the country has his own car. Some families have several four-wheeled vehicles. Every car requires periodic tire changes. It's not just about seasonal wheel types. Modern roads and weather conditions mean that the rubber used to make tires quickly becomes unusable.

The culture of recycling such waste in our country is very poorly developed. Therefore, you can often see a picture when on the outskirts settlements and in forest belts entire mountains grow from tires.

There is no need to talk again about how harmful such garbage is to nature. Even schoolchildren know that the half-life of rubber is hundreds of years. Therefore, it is better to take the unnecessary wheel to a collection point, which can be found at the nearest car service center, or offer it to a familiar summer resident who knows how to make a flowerbed from a tire with his own hands.

Advantages of tires as a material for decoration

Tireless searchers for the most original way to decorate a personal plot are increasingly choosing this interesting element decor, like a flowerbed made from a wheel. The most enthusiastic craftsmen willingly share their creations, showing numerous photos in which the floral design of the territory, created with the help of a flower bed made of tires with their own hands, looks unusual, beautiful and harmoniously combines with general design dachas

The choice of such material for decorating a flower garden is explained by several factors:

1. Rubber can serve for a long time in the country.
2. The material is available and can be obtained completely free of charge.
3. Tires are relatively easy to process, can take on a variety of shapes, and can be painted in different colors.
4. A flower garden made from car tires allows you to change the design if necessary, because its elements are easy to replace.
5. A flowerbed made of tires does not require special skills or the use of complex tools to make it.

All these obvious advantages force many summer residents to decorate their private landholdings in such an accessible, cheap and original way.

Types of tire fencing for flower beds

It seems incredible, but ordinary rough rubber wheels removed from a car provide a wide field for creativity to a landscaping specialist. This material allows you to create compositions with a variety of shapes and designs.

The most famous option, how to make a flowerbed from a tire, is simple and does not require any additional funds. It is enough to take a tire, paint it in the desired color, cover it with soil and plant ornamental plants in the center of an impromptu flower garden. Such round, low, single-tier flower beds are suitable for small areas.

In large areas it is better to create massive structures. Tires different sizes allow you to create multi-level compositions that become bright accent in any garden. Such a flowerbed of tires can be narrow, but high. In this case, the tires are laid out one on top of the other, from largest to smallest, creating a fancy tower, the top of which is decorated with bright flowers.

There is another way to create a multi-tiered flower garden. You can choose tires of the same diameter, but place them in a checkerboard pattern, gradually reducing the number of elements used from bottom to top. Each tire in this case will be a miniature flowerbed, which will be an integral part of the flowering pyramid.

Wheel flower beds can have different shapes. Most often you can find rubber flowerpots, as well as fancy figures cut out of tires. Animals and birds, fairy-tale characters, flowers, household items - all this can become a decorative idea embodied in an ordinary car wheel.

Another unusual method of creating decorative elements for the garden is hanging structures from tires. They resemble flowerpots and give the whole area a special charm. To create such a flowerbed, it is enough to cover the bottom of the tire with improvised means so that the earth does not spill out through the wide hole, then you need to hang it ready product using an iron chain or cable to a support. This could be a house wall, a tree, or a special metal frame. After this, soil is poured into the finished flower garden and the plants are planted.

A variety of composition options that can be created based on rubber tires open up great scope for creativity and make this material very popular in garden plots.

How to choose and prepare tires for making a flower bed?

Almost any type of tires is suitable for creating individual decorative elements in the country. However, there are several secrets that can make working with these products much easier:

1. Winter tires are much easier to process and are more flexible. It is easier to make shaped compositions from this type of tire.
2. To create a flower bed from tires, it is better to choose wheels that are as worn as possible; they are easy to cut. It is easier to turn a tire with worn tread inside out if necessary.
3. Rubber for domestic car wheels is rougher and thicker. It's more difficult to work with her. If you have a choice, you should give preference to imported types of tires. They are more flexible and allow you to make beautiful compositions with less physical effort and time.

Before starting work, the materials must be thoroughly washed to remove dirt and sand. Then you need to mark the future details of the flower garden. This is done with bright markers, chalk or regular soap. A preliminary drawing greatly facilitates the work and guarantees that the individual elements will be the same in shape and size.

After the product is ready, you need to paint it. It is not enough to apply the color composition only to the outer surface of the future flower bed, since some internal areas may also be visible. Therefore, the tire must be completely painted. The color that fits into the general style of the site is determined in advance.

Several types of paints are suitable for working with rubber: oil, enamel, automotive. If you decide to make the flowerbed monochromatic, you can use an aerosol. This method is very convenient; the paint goes on evenly, giving the surface a rich and bright shade. Patterns and ornaments can also be created using this method, using special stencils.

To avoid minor irregularities and prolong the life of the designs, apply a thin layer of primer to the tire before painting. Sometimes PVA glue is added to it, which increases the durability of the pattern.

How are flower beds made from car tires?

To work with tires you will need minimum set tools:

• sharp knife or electric jigsaw;
• marker, chalk or soap for marking on which the figure will be cut out;
• wire various thicknesses for connecting various decorative elements;
• paints and brushes;
• gloves.

Creating an ordinary round single-tier flower bed does not require much time and effort. But if you decide to make a flowerpot or an original rubber figure, you will have to work a little.

You can often see flower beds in the form of a tea set or a free-standing mug. To create them, just one car tire with disk. Top part The tires are cut along the entire width, the lower part is cut along the diameter of the disk with a slight indentation. Both received parts are turned inside out.

The smaller element serves as a stand; most of the product in the form of a bowl is installed on it. A handle made of wire or other available material is attached to the side. All that remains is to fill the soil and plant the seeds of perennials. ornamental plants. Such a flowerbed in the form of a tea room or coffee cup will decorate any area.

In a similar way you can do original pot or beautiful vase from the wheel. A large number of color options are made from tires turned inside out, cutting out the edges of the product in the form of leaves of various shapes. To create such decorations on the site you need tires, paints and an electric jigsaw. Flowerbeds with a figured contour can be made either single-tiered or multi-stage, depending on the general idea.

landscape design

Simple ideas for animal shapes made from tires The most popular details for decorating a personal plot in Lately

steel figures of animals, birds and representatives of the underwater world, made from car wheels. The properties of rubber allow you to create quite realistic works that will not only decorate the area, but will also serve as flower beds or original boxes for seedlings. The most simple options

living creatures made from tires are considered to be a turtle and a spider. Their creation does not require complex work with the source material. It is enough to cut the required number of legs from one tire and attach them to another whole wheel. You can make a turtle or spider head from an old rubber ball, then draw eyes, nose and mouth on it.

It is quite simple to make schematic images of fairy-tale characters. Often at the sites you can meet Masha and the Bear from the modern cartoon of the same name. The technology for making such flower beds is simple. The only difficulty is to securely fasten the tires of different sizes, which should stand on top of each other, indicating the torso and head of the hero of the fairy tale.

The bear's ears and paws can be made from leftover tires used in another project. On the top wheel you should draw the face of an animal, and in the central one, which serves as the body, you can plant flowers.

The most complex, but favorite figures in every garden are swans. To maintain it in this position, a wire is used. The bird's beak is made separately from rubber scraps and attached to the product at the end of the work.

It is much easier to make a vertical flower bed in the shape of a dolphin. To do this, an incision is made on the side of the tire. On one side it is sharpened so that it resembles the shape of the nose of this amazing marine mammal, on the other hand, the tail is cut out. A fin made of an oblong piece of medium-sized rubber should be attached to the opposite part of the wheel. Complete the look with a matching tire color. Such a flowerbed can stand on the ground or be suspended on a special frame, resembling a dolphin that has just emerged from depths of the sea.

Household items from car wheels in the design of a dacha

The imagination of summer residents knows no bounds, so in their garden plots you can see a flower garden in the shape of almost any familiar object, made from tires. An interesting option is a watch. Round form tires allows you to create all kinds of models similar devices. The most popular are flower beds in the form of alarm clocks or wall clock with a fight.

In both cases, flowers are planted in a tire turned on its edge. Only in the first - the wheel stands on the ground, and in the second - it is suspended on the wall of a house or other building, and sometimes it is fixed on a tree branch. The clock hands are made of wire, the dial is painted. Additional items can be made from any available materials: from plastic bottles to wooden blocks.

Flower beds in the form of round mirrors, antique telephones and even tables and chairs - all this can be made from tires with your own hands. This activity allows you not only to look beautiful, saving on expensive materials, but also to discover new talents, including in landscape design.

IN modern world Increasingly, people are practicing to build their residential buildings and other buildings (structures) from non-traditional materials and recycled materials.

This construction was called " unconventional construction" This article will discuss the construction of buildings and its elements from used car tires.

Tire house - unconventional construction

For the first time, the construction of buildings from tires was carried out in the USA by Mike Reynolds (video about the progress of its construction), and in Russia by Mikhail Semykin from St. Petersburg.

Mikhail Semykin first built a garage from tires, and then a foundation for a three-story house with an area of ​​260 m2. The buildings of the inventor Semykin have been standing for decades.

American Mike Reynolds began building houses from tires in 1970. He began to call his buildings “earth ships.” His construction technology has found application in England, Portugal, Spain, Belgium, Estonia and others. European countries, photo 1.

Photo 1. Examples of selling houses using used ones. car tires

Using used car tires you can build a foundation and load-bearing walls building. Not only residential buildings are built from them, but also outbuildings, bathhouses, stairs, retaining walls, septic tanks, drainage pits etc. - see photo 2.

Photo 2. Use of tires

Foundation made from car tires

Let us briefly consider the main points of constructing a foundation from car tires, the disadvantages and advantages of using tires for construction.

The construction of a tire foundation is carried out approximately in this order:

1. The construction of a tire foundation begins with laying out the foundations directly at the construction site.
2. In progress excavation for the construction of foundation trenches or pits. The width of the foundation is equal to the outer diameter of the tire.
3. Laying tires in a trench, photo 3. It is performed in different ways:

• continuous laying of tires - to each other;
• laying tires in increments of 0.5...1.0 m.

Photo 3. Laying tires as a foundation

1. With each layer of tires, the internal cavities are filled with gravel (or crushed stone) mixed with sand, photo 4. The backfill is carefully compacted to achieve minimal settlement of the foundation under the weight of the building. You can use soil or soil as backfill. construction garbage, but sand and gravel are better.

Photo 4. Backfill internal space tires

1. Laying waterproofing on top of a tire foundation.
2. Installation of foundation blocks (1...2 rows) or armored belt (0.1...0.2 m high), and then installation is carried out wooden beams floor of the 1st floor, photo 5.

Photo 5. Installation of wooden beams on a tire foundation

Advantages of a tire foundation

• Free raw material that can be reused or recycled.
• Low cost of foundation made of tires.
• The high durability of the tire foundation is more than 100 years (if exposure to UV rays is excluded, the rubber does not decompose or rot).
• Increased seismic resistance of the foundation. The tires serve as a kind of cushion for the building as a whole.
• High resistance to seasonal deformations of soils and foundations.

Disadvantages of a tire foundation

• In the summer, a rubber smell may emanate from the upper (exposed) part of the foundation.
• The tire foundation has an unaesthetic appearance. Although the foundation of tires can be covered with facing materials.
• This technology is applicable only for shallow foundations without a high base or basement.

Construction of walls from car tires

Tire walls are made as follows:

1. The foundation and reinforced concrete belt are installed.
2. The walls are erected from tires with their mutual bandaging (as when making brickwork).
3. Internal voids and the space between tires are filled with clay mortar or plastic clay, photo 6.

Photo 6. Walls made of car tires

1. Internal and outer side sheathed with plasterboard and wood or plastered with different plaster mixtures, to prevent tire fires, photo 7.
2. For more reliable stability of the walls, they are reinforced with a metal frame or reinforcement.

Photo 7. Internal view walls after building a house

The advantages and disadvantages are almost the same as those of tire foundations. Walls made of tires have sufficiently high thermal insulation and heat capacity, which can significantly reduce building heating costs and increase comfort during the operation of residential building premises.

Publication prepared by an expert

Konev Alexander Anatolievich